PAE40 without HIGHMEM

[Alexey.Brodkin@synopsys.com (Alexey Brodkin)]

Hi Vineet,

On Fri, 2017-05-05@12:31 -0700, Vineet Gupta wrote:
> +CC arcml
> 
> Hi Alexey,
> 
> On 05/05/2017 01:44 AM, Alexey Brodkin wrote:
> > 
> > Hi Vineet,
> > 
> > Playing with PAE40 on axs103 v1.2-rc2 (where PAE really seems to work quite well)
> > Eugeniy bumped into the fact that PAE could be enabled without HIGHMEM.
> > 
> > Personally I din't face that trouble because I used to enable HIGHMEM manually before
> > even thinking of PAE.
> > 
> > So we were surprised why there's no dependency which I was pretty sure was there
> > back in the day. And to no surprise I found you removed such a dependency in
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7cab91b87dd8eeee5911ec34be8bb0288ebba18b
> > "ARCv2: Allow enabling PAE40 w/o HIGHMEM".
> > 
> > Now what we have another [and this time real HW] platform with PAE support
> > and DDR mapped above 4Gb do you think we may revert this change and
> > put dependency on HIGHMEM for PAE?
> > 
> > If you like I may send a patch to that effect.
> 
> I understand your point, and PAE40 when really exercising > 32 bits certainly
> needs HIGHMEM.
> 
> However in a setup where we only had 32 bit paddr, we can technically still build
> a PAE40 enabled kernel - which uses PAE40 enabled MMU cmds etc (with upper words
> always happening to be 0) and should in theory work as well. Agreed it is not a
> production config, still it is a useful "test" config or a "developer" config.
> 
> The next question is why was Euginey seeing the errors - because he had DT setup
> memory > 1_0000_0000 and CONFIG_HIGHMEM was not enabled ? That certainly is broken
> and needs to be prevented at config or early run time.

Actually it was not an error that Eugeniy saw but absence of any differences after:
1) Adding the second memory region "0x1 0xa000_0000" in axc003_idu.dtsi
2) Enabling PAE40 in menuconfig

We had roughly the same situation as with PAE disabled and pristine DTS.
Well the only difference was mention of PAE40 being in use... but still only
256Mb (read the same lowmem) was available.

I'd say for "tests" we may manually overcome HIGHMEM dependency (with local arch/arc/Kconfig mod)
but keep the dependency in place so users who really want to access memory above 4Gb are not
misleaded.

-Alexey