Patch "usb: host: xhci: print correct command ring address" has been added to the 4.10-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    usb: host: xhci: print correct command ring address

to the 4.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-host-xhci-print-correct-command-ring-address.patch
and it can be found in the queue-4.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 6fc091fb0459ade939a795bfdcaf645385b951d4 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@nxp.com>
Date: Wed, 19 Apr 2017 16:55:52 +0300
Subject: usb: host: xhci: print correct command ring address

From: Peter Chen <peter.chen@nxp.com>

commit 6fc091fb0459ade939a795bfdcaf645385b951d4 upstream.

Print correct command ring address using 'val_64'.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-mem.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2485,7 +2485,7 @@ int xhci_mem_init(struct xhci_hcd *xhci,
 		(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
 		xhci->cmd_ring->cycle_state;
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-			"// Setting command ring address to 0x%x", val);
+			"// Setting command ring address to 0x%016llx", val_64);
 	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
 	xhci_dbg_cmd_ptrs(xhci);
 


Patches currently in stable-queue which might be from peter.chen@nxp.com are

queue-4.10/usb-host-xhci-print-correct-command-ring-address.patch