From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: jean-philippe francois <jp.francois@cynove.com>
Cc: linux-media@vger.kernel.org, Sakari Ailus <sakari.ailus@iki.fi>
Subject: Re: [PATCH] omap3isp: preview: Add support for non-GRBG Bayer patterns
Date: Fri, 22 Jun 2012 01:29:05 +0200 [thread overview]
Message-ID: <1495058.aP2aaavdWk@avalon> (raw)
In-Reply-To: <CAGGh5h2NoojuguvRfQRsYx2xX1eRzXWw-sJYdnDgquWqoGbD-w@mail.gmail.com>
Hi Jean-Philippe,
On Thursday 21 June 2012 15:35:52 jean-philippe francois wrote:
> 2012/6/18 Laurent Pinchart <laurent.pinchart@ideasonboard.com>:
> > Rearrange the CFA interpolation coefficients table based on the Bayer
> > pattern. Modifying the table during streaming isn't supported anymore,
> > but didn't make sense in the first place anyway.
> >
> > Support for non-Bayer CFA patterns is dropped as they were not correctly
> > supported, and have never been tested.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > drivers/media/video/omap3isp/isppreview.c | 118 ++++++++++++++----------
> > 1 files changed, 67 insertions(+), 51 deletions(-)
> >
> > Jean-Philippe,
> >
> > Could you please test this patch on your hardware ?
>
> Hi,
>
> I have applied it on top of your omap3isp-next branch, but my board is
> oopsing right after the boot. I will try to get rid of this oops, but if you
> eventually now another tree that includes the changes necessary for this
> patch to apply, it could perhaps save me some time.
The patch should apply on top of the omap3isp-omap3isp-next branch that I've
just pushed to my linuxtv tree.
> Here is a oops, in case somebody can point me to a patch, but the oops
> is not very specific :
>
> <6>Total of 96 interrupts on 1 active controller
> <4>omap_hwmod: arm_fck: missing clockdomain for arm_fck.
> <4>omap_hwmod: gpt1_fck: missing clockdomain for gpt1_fck.
> <6>OMAP clockevent source: GPTIMER1 at 32768 Hz
> <6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every
> 131071999ms <1>Unable to handle kernel NULL pointer dereference at virtual
> address 00000000 <1>pgd = c0004000
> <1>[00000000] *pgd=00000000
> <0>Internal error: Oops: 80000005 [#1] PREEMPT ARM
> <d>Modules linked in:
> CPU: 0 Not tainted (3.4.0-rc3 #2)
> PC is at 0x0
> LR is at __irq_svc+0x40/0x70
> pc : [<00000000>] lr : [<c000e280>] psr: 000001d3
> sp : c0461f88 ip : 0000000f fp : 00000000
> r10: 00000000 r9 : 413fc082 r8 : 80004059
> r7 : c0461fbc r6 : ffffffff r5 : 00000153 r4 : c04367e0
> r3 : c0010108 r2 : c0461fd0 r1 : c046b00c r0 : c0461f88
> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
> Control: 10c5387d Table: 80004019 DAC: 00000015
> <0>Process swapper (pid: 0, stack limit = 0xc04602e8)
> <0>Stack: (0xc0461f88 to 0xc0462000)
> <0>1f80: 00007735 000001d3 01ffffff c0468118 00000000
> c046808c <0>1fa0: c0456ec0 c046b004 80004059 413fc082 00000000 00000000
> 0000000f c0461fd0 <0>1fc0: c0010108 c04367e0 00000153 ffffffff 00000000
> 00000000 c04364fc 00000000 <0>1fe0: 00000000 c0456ec4 00000000 10c53c7d
> c046808c 8000803c 00000000 00000000 [<c000e280>] (__irq_svc+0x40/0x70) from
> [<c04367e0>] (start_kernel+0x138/0x254) [<c04367e0>]
> (start_kernel+0x138/0x254) from [<8000803c>] (0x8000803c) <0>Code: bad PC
> value
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2012-06-21 23:28 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-18 14:30 [PATCH] omap3isp: preview: Add support for non-GRBG Bayer patterns Laurent Pinchart
2012-06-21 13:35 ` jean-philippe francois
2012-06-21 23:29 ` Laurent Pinchart [this message]
2012-06-22 14:19 ` jean-philippe francois
2012-06-23 8:22 ` Sakari Ailus
2012-06-26 1:30 ` Laurent Pinchart
2012-06-26 19:01 ` Sakari Ailus
2012-06-27 14:07 ` Laurent Pinchart
2012-06-27 13:42 ` Ivan T. Ivanov
2012-06-27 13:54 ` Laurent Pinchart
2012-06-27 14:30 ` Ivan T. Ivanov
2012-06-27 14:42 ` Laurent Pinchart
2012-06-27 14:43 ` Ivan T. Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495058.aP2aaavdWk@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=jp.francois@cynove.com \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.