patch "USB: serial: io_ti: fix div-by-zero in set_termios" added to usb-linus

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    USB: serial: io_ti: fix div-by-zero in set_termios

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


>From 6aeb75e6adfaed16e58780309613a578fe1ee90b Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Thu, 11 May 2017 11:41:21 +0200
Subject: USB: serial: io_ti: fix div-by-zero in set_termios

Fix a division-by-zero in set_termios when debugging is enabled and a
high-enough speed has been requested so that the divisor value becomes
zero.

Instead of just fixing the offending debug statement, cap the baud rate
at the base as a zero divisor value also appears to crash the firmware.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>     # 2.6.12
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/io_ti.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 87798e625d6c..6cefb9cb133d 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2336,8 +2336,11 @@ static void change_port_settings(struct tty_struct *tty,
 	if (!baud) {
 		/* pick a default, any default... */
 		baud = 9600;
-	} else
+	} else {
+		/* Avoid a zero divisor. */
+		baud = min(baud, 461550);
 		tty_encode_baud_rate(tty, baud, baud);
+	}
 
 	edge_port->baud_rate = baud;
 	config->wBaudRate = (__u16)((461550L + baud/2) / baud);
-- 
2.13.0