From: <gregkh@linuxfoundation.org>
To: stern@rowland.harvard.edu, andihartmann@01019freenet.de,
gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "USB: ene_usb6250: fix DMA to the stack" has been added to the 4.4-stable tree
Date: Mon, 22 May 2017 12:24:30 +0200 [thread overview]
Message-ID: <1495448670125115@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
USB: ene_usb6250: fix DMA to the stack
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-ene_usb6250-fix-dma-to-the-stack.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 628c2893d44876ddd11602400c70606ade62e129 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 16 May 2017 11:47:29 -0400
Subject: USB: ene_usb6250: fix DMA to the stack
From: Alan Stern <stern@rowland.harvard.edu>
commit 628c2893d44876ddd11602400c70606ade62e129 upstream.
The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on
the stack, which doesn't work with vmapped stacks. This patch fixes
the problem by allocating a separate 512-byte buffer at probe time and
using it for all of the offending I/O operations.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/storage/ene_ub6250.c | 90 +++++++++++++++++++++++----------------
1 file changed, 55 insertions(+), 35 deletions(-)
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -446,6 +446,10 @@ struct ms_lib_ctrl {
#define SD_BLOCK_LEN 9
struct ene_ub6250_info {
+
+ /* I/O bounce buffer */
+ u8 *bbuf;
+
/* for 6250 code */
struct SD_STATUS SD_Status;
struct MS_STATUS MS_Status;
@@ -493,8 +497,11 @@ static int ene_load_bincode(struct us_da
static void ene_ub6250_info_destructor(void *extra)
{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) extra;
+
if (!extra)
return;
+ kfree(info->bbuf);
}
static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)
@@ -858,8 +865,9 @@ static int ms_read_readpage(struct us_da
u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
int result;
- u8 ExtBuf[4];
u32 bn = PhyBlockAddr * 0x20 + PageNum;
/* printk(KERN_INFO "MS --- MS_ReaderReadPage,
@@ -902,7 +910,7 @@ static int ms_read_readpage(struct us_da
bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16);
bcb->CDB[6] = 0x01;
- result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -911,9 +919,9 @@ static int ms_read_readpage(struct us_da
ExtraDat->status0 = 0x10; /* Not yet,fireware support */
ExtraDat->status1 = 0x00; /* Not yet,fireware support */
- ExtraDat->ovrflg = ExtBuf[0];
- ExtraDat->mngflg = ExtBuf[1];
- ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+ ExtraDat->ovrflg = bbuf[0];
+ ExtraDat->mngflg = bbuf[1];
+ ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]);
return USB_STOR_TRANSPORT_GOOD;
}
@@ -1339,8 +1347,9 @@ static int ms_lib_read_extra(struct us_d
u8 PageNum, struct ms_lib_type_extdat *ExtraDat)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
int result;
- u8 ExtBuf[4];
/* printk("MS_LibReadExtra --- PhyBlock = %x, PageNum = %x\n", PhyBlock, PageNum); */
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
@@ -1355,7 +1364,7 @@ static int ms_lib_read_extra(struct us_d
bcb->CDB[2] = (unsigned char)(PhyBlock>>16);
bcb->CDB[6] = 0x01;
- result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -1363,9 +1372,9 @@ static int ms_lib_read_extra(struct us_d
ExtraDat->intr = 0x80; /* Not yet, waiting for fireware support */
ExtraDat->status0 = 0x10; /* Not yet, waiting for fireware support */
ExtraDat->status1 = 0x00; /* Not yet, waiting for fireware support */
- ExtraDat->ovrflg = ExtBuf[0];
- ExtraDat->mngflg = ExtBuf[1];
- ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+ ExtraDat->ovrflg = bbuf[0];
+ ExtraDat->mngflg = bbuf[1];
+ ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]);
return USB_STOR_TRANSPORT_GOOD;
}
@@ -1569,9 +1578,9 @@ static int ms_lib_scan_logicalblocknumbe
u16 PhyBlock, newblk, i;
u16 LogStart, LogEnde;
struct ms_lib_type_extdat extdat;
- u8 buf[0x200];
u32 count = 0, index = 0;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) {
ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde);
@@ -1585,14 +1594,16 @@ static int ms_lib_scan_logicalblocknumbe
}
if (count == PhyBlock) {
- ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, &buf);
+ ms_lib_read_extrablock(us, PhyBlock, 0, 0x80,
+ bbuf);
count += 0x80;
}
index = (PhyBlock % 0x80) * 4;
- extdat.ovrflg = buf[index];
- extdat.mngflg = buf[index+1];
- extdat.logadr = memstick_logaddr(buf[index+2], buf[index+3]);
+ extdat.ovrflg = bbuf[index];
+ extdat.mngflg = bbuf[index+1];
+ extdat.logadr = memstick_logaddr(bbuf[index+2],
+ bbuf[index+3]);
if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) {
ms_lib_setacquired_errorblock(us, PhyBlock);
@@ -2075,9 +2086,9 @@ static int ene_ms_init(struct us_data *u
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
int result;
- u8 buf[0x200];
u16 MSP_BlockSize, MSP_UserAreaBlocks;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
printk(KERN_INFO "transport --- ENE_MSInit\n");
@@ -2096,13 +2107,13 @@ static int ene_ms_init(struct us_data *u
bcb->CDB[0] = 0xF1;
bcb->CDB[1] = 0x01;
- result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD) {
printk(KERN_ERR "Execution MS Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
/* the same part to test ENE */
- info->MS_Status = *(struct MS_STATUS *)&buf[0];
+ info->MS_Status = *(struct MS_STATUS *) bbuf;
if (info->MS_Status.Insert && info->MS_Status.Ready) {
printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert);
@@ -2111,15 +2122,15 @@ static int ene_ms_init(struct us_data *u
printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG);
printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP);
if (info->MS_Status.IsMSPro) {
- MSP_BlockSize = (buf[6] << 8) | buf[7];
- MSP_UserAreaBlocks = (buf[10] << 8) | buf[11];
+ MSP_BlockSize = (bbuf[6] << 8) | bbuf[7];
+ MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11];
info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
} else {
ms_card_init(us); /* Card is MS (to ms.c)*/
}
usb_stor_dbg(us, "MS Init Code OK !!\n");
} else {
- usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]);
+ usb_stor_dbg(us, "MS Card Not Ready --- %x\n", bbuf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
@@ -2129,9 +2140,9 @@ static int ene_ms_init(struct us_data *u
static int ene_sd_init(struct us_data *us)
{
int result;
- u8 buf[0x200];
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
usb_stor_dbg(us, "transport --- ENE_SDInit\n");
/* SD Init Part-1 */
@@ -2165,17 +2176,17 @@ static int ene_sd_init(struct us_data *u
bcb->Flags = US_BULK_FLAG_IN;
bcb->CDB[0] = 0xF1;
- result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD) {
usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
- info->SD_Status = *(struct SD_STATUS *)&buf[0];
+ info->SD_Status = *(struct SD_STATUS *) bbuf;
if (info->SD_Status.Insert && info->SD_Status.Ready) {
struct SD_STATUS *s = &info->SD_Status;
- ene_get_card_status(us, (unsigned char *)&buf);
+ ene_get_card_status(us, bbuf);
usb_stor_dbg(us, "Insert = %x\n", s->Insert);
usb_stor_dbg(us, "Ready = %x\n", s->Ready);
usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC);
@@ -2183,7 +2194,7 @@ static int ene_sd_init(struct us_data *u
usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed);
usb_stor_dbg(us, "WtP = %x\n", s->WtP);
} else {
- usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]);
+ usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
return USB_STOR_TRANSPORT_GOOD;
@@ -2193,13 +2204,15 @@ static int ene_sd_init(struct us_data *u
static int ene_init(struct us_data *us)
{
int result;
- u8 misc_reg03 = 0;
+ u8 misc_reg03;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+ u8 *bbuf = info->bbuf;
- result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+ result = ene_get_card_type(us, REG_CARD_STATUS, bbuf);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
+ misc_reg03 = bbuf[0];
if (misc_reg03 & 0x01) {
if (!info->SD_Status.Ready) {
result = ene_sd_init(us);
@@ -2316,8 +2329,9 @@ static int ene_ub6250_probe(struct usb_i
const struct usb_device_id *id)
{
int result;
- u8 misc_reg03 = 0;
+ u8 misc_reg03;
struct us_data *us;
+ struct ene_ub6250_info *info;
result = usb_stor_probe1(&us, intf, id,
(id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list,
@@ -2326,11 +2340,16 @@ static int ene_ub6250_probe(struct usb_i
return result;
/* FIXME: where should the code alloc extra buf ? */
- if (!us->extra) {
- us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
- if (!us->extra)
- return -ENOMEM;
- us->extra_destructor = ene_ub6250_info_destructor;
+ us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
+ if (!us->extra)
+ return -ENOMEM;
+ us->extra_destructor = ene_ub6250_info_destructor;
+
+ info = (struct ene_ub6250_info *)(us->extra);
+ info->bbuf = kmalloc(512, GFP_KERNEL);
+ if (!info->bbuf) {
+ kfree(us->extra);
+ return -ENOMEM;
}
us->transport_name = "ene_ub6250";
@@ -2342,12 +2361,13 @@ static int ene_ub6250_probe(struct usb_i
return result;
/* probe card type */
- result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+ result = ene_get_card_type(us, REG_CARD_STATUS, info->bbuf);
if (result != USB_STOR_XFER_GOOD) {
usb_stor_disconnect(intf);
return USB_STOR_TRANSPORT_ERROR;
}
+ misc_reg03 = info->bbuf[0];
if (!(misc_reg03 & 0x01)) {
pr_info("ums_eneub6250: This driver only supports SD/MS cards. "
"It does not support SM cards.\n");
Patches currently in stable-queue which might be from stern@rowland.harvard.edu are
queue-4.4/usb-ene_usb6250-fix-dma-to-the-stack.patch
reply other threads:[~2017-05-22 10:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495448670125115@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=andihartmann@01019freenet.de \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.