From: Jason Rush <jarush@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 4/4] dts: k2g: Clean-up indentation
Date: Tue, 23 May 2017 08:52:52 -0500 [thread overview]
Message-ID: <1495547572-7741-5-git-send-email-jarush@gmail.com> (raw)
In-Reply-To: <1495547572-7741-1-git-send-email-jarush@gmail.com>
Fix indentation of the QSPI node.
---
Changes for v3:
- Additional patch for clean-up
arch/arm/dts/keystone-k2g-evm.dts | 75 +++++++++++++++++++--------------------
1 file changed, 37 insertions(+), 38 deletions(-)
diff --git a/arch/arm/dts/keystone-k2g-evm.dts b/arch/arm/dts/keystone-k2g-evm.dts
index ce430ba..e5b1b0c 100644
--- a/arch/arm/dts/keystone-k2g-evm.dts
+++ b/arch/arm/dts/keystone-k2g-evm.dts
@@ -59,46 +59,45 @@
&qspi {
status = "okay";
- flash0: m25p80 at 0 {
- compatible = "s25fl512s","spi-flash";
- reg = <0>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- spi-max-frequency = <96000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- cdns,tshsl-ns = <392>;
- cdns,tsd2d-ns = <392>;
- cdns,tchsh-ns = <100>;
- cdns,tslch-ns = <100>;
+ flash0: m25p80 at 0 {
+ compatible = "s25fl512s","spi-flash";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <96000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cdns,tshsl-ns = <392>;
+ cdns,tsd2d-ns = <392>;
+ cdns,tchsh-ns = <100>;
+ cdns,tslch-ns = <100>;
block-size = <18>;
-
- partition at 0 {
- label = "QSPI.u-boot-spl-os";
- reg = <0x00000000 0x00100000>;
- };
- partition at 1 {
- label = "QSPI.u-boot-env";
- reg = <0x00100000 0x00040000>;
- };
- partition at 2 {
- label = "QSPI.skern";
- reg = <0x00140000 0x0040000>;
- };
- partition at 3 {
- label = "QSPI.pmmc-firmware";
- reg = <0x00180000 0x0040000>;
- };
- partition at 4 {
- label = "QSPI.kernel";
- reg = <0x001C0000 0x0800000>;
- };
- partition at 5 {
- label = "QSPI.file-system";
- reg = <0x009C0000 0x3640000>;
- };
- };
+ partition at 0 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition at 1 {
+ label = "QSPI.u-boot-env";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition at 2 {
+ label = "QSPI.skern";
+ reg = <0x00140000 0x0040000>;
+ };
+ partition at 3 {
+ label = "QSPI.pmmc-firmware";
+ reg = <0x00180000 0x0040000>;
+ };
+ partition at 4 {
+ label = "QSPI.kernel";
+ reg = <0x001C0000 0x0800000>;
+ };
+ partition at 5 {
+ label = "QSPI.file-system";
+ reg = <0x009C0000 0x3640000>;
+ };
+ };
};
&mmc0 {
--
2.1.4
prev parent reply other threads:[~2017-05-23 13:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-23 13:52 [U-Boot] [PATCH v3 0/4] spi: cadence_spi: Adopt Linux DT bindings Jason Rush
2017-05-23 13:52 ` [U-Boot] [PATCH v3 1/4] spi: cadence_spi: Sync DT bindings with Linux Jason Rush
2017-05-23 13:52 ` [U-Boot] [PATCH v3 2/4] dts: " Jason Rush
2017-05-23 13:52 ` [U-Boot] [PATCH v3 3/4] config: cadence_spi: Remove defines read from DT Jason Rush
2017-05-23 13:52 ` Jason Rush [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495547572-7741-5-git-send-email-jarush@gmail.com \
--to=jarush@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.