From: festevam@gmail.com (Fabio Estevam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: dts: imx7d-sdb: Add Wifi support
Date: Mon, 29 May 2017 16:00:59 -0300 [thread overview]
Message-ID: <1496084460-20910-2-git-send-email-festevam@gmail.com> (raw)
In-Reply-To: <1496084460-20910-1-git-send-email-festevam@gmail.com>
From: Fabio Estevam <fabio.estevam@nxp.com>
imx7d-sdb has a BCM4339 Wifi chip connected to USDHC2.
Add support for it.
While at it, move the WL_REG_ON pin to the correct pinctrl node.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm/boot/dts/imx7d-sdb.dts | 32 +++++++++++++++++++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 38944ca..fc7e0b0 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -105,6 +105,18 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ reg_brcm: regulator-brcm {
+ compatible = "regulator-fixed";
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "brcm_reg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_brcm_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <200000>;
+ };
};
&adc1 {
@@ -379,6 +391,19 @@
status = "okay";
};
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ enable-sdio-wakeup;
+ keep-power-in-suspend;
+ non-removable;
+ vmmc-supply = <®_brcm>;
+ fsl,tuning-step = <2>;
+ status = "okay";
+};
+
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
@@ -403,6 +428,12 @@
pinctrl-0 = <&pinctrl_hog>;
imx7d-sdb {
+ pinctrl_brcm_reg: brcmreggrp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14
+ >;
+ };
+
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2
@@ -570,7 +601,6 @@
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
- MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */
>;
};
--
2.7.4
next prev parent reply other threads:[~2017-05-29 19:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-29 19:00 [PATCH 1/3] ARM: dts: imx7d-sdb: Adjust the regulator nodes Fabio Estevam
2017-05-29 19:00 ` Fabio Estevam [this message]
2017-06-05 1:54 ` [PATCH 2/3] ARM: dts: imx7d-sdb: Add Wifi support Shawn Guo
2017-05-29 19:01 ` [PATCH 3/3] ARM: dts: imx7d-sdb: Add Bluetooth support Fabio Estevam
2017-06-05 2:02 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496084460-20910-2-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.