[PATCH v2] u-boot: enable dhcp for MPC8315 board

[Ed Bartosh <ed.bartosh@linux.intel.com>]

Getting ip address from DHCP server is much more convenient
than setting static ip. It allows to configure u-boot in
more generic way and to avoid hardcoding static ip in
u-boot configuration.

Enabled dhcp client functionality for Yocto reference
hardware MPC8315E-RDB.

Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
---
 meta/recipes-bsp/u-boot/files/MPC8315ERDB-enable-DHCP.patch | 12 ++++++++++++
 meta/recipes-bsp/u-boot/u-boot-common_2017.01.inc           |  4 +++-
 2 files changed, 15 insertions(+), 1 deletion(-)
 create mode 100644 meta/recipes-bsp/u-boot/files/MPC8315ERDB-enable-DHCP.patch

diff --git a/meta/recipes-bsp/u-boot/files/MPC8315ERDB-enable-DHCP.patch b/meta/recipes-bsp/u-boot/files/MPC8315ERDB-enable-DHCP.patch
new file mode 100644
index 0000000..df89e05
--- /dev/null
+++ b/meta/recipes-bsp/u-boot/files/MPC8315ERDB-enable-DHCP.patch
@@ -0,0 +1,12 @@
+diff --git a/configs/MPC8315ERDB_defconfig b/configs/MPC8315ERDB_defconfig
+index 4e2b705..b02ab1f 100644
+--- a/configs/MPC8315ERDB_defconfig
++++ b/configs/MPC8315ERDB_defconfig
+@@ -9,6 +9,7 @@ CONFIG_HUSH_PARSER=y
+ CONFIG_CMD_I2C=y
+ CONFIG_CMD_USB=y
+ # CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_DHCP=y
+ CONFIG_CMD_MII=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_EXT2=y
diff --git a/meta/recipes-bsp/u-boot/u-boot-common_2017.01.inc b/meta/recipes-bsp/u-boot/u-boot-common_2017.01.inc
index df24c85..8ee1c32 100644
--- a/meta/recipes-bsp/u-boot/u-boot-common_2017.01.inc
+++ b/meta/recipes-bsp/u-boot/u-boot-common_2017.01.inc
@@ -9,6 +9,8 @@ PE = "1"
 # repo during parse
 SRCREV = "a705ebc81b7f91bbd0ef7c634284208342901149"
 
-SRC_URI = "git://git.denx.de/u-boot.git"
+SRC_URI = "git://git.denx.de/u-boot.git \
+    file://MPC8315ERDB-enable-DHCP.patch \
+"
 
 S = "${WORKDIR}/git"
-- 
2.1.4