diff for duplicates of <1497005895.28352.88.camel@nxp.com> diff --git a/a/1.txt b/N1/1.txt index 3e36cfa..53ffc91 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -2,12 +2,12 @@ On Thu, 2017-06-08 at 13:45 -0300, Fabio Estevam wrote: > On Thu, Jun 8, 2017 at 1:26 PM, Leonard Crestez wrote: > > > -> > + tempmon: tempmon { -> > + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; -> > + interrupts = ; -> > + fsl,tempmon = <&anatop>; -> > + fsl,tempmon-data = <&ocotp>; -> > + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; +> > +???????????????????????tempmon: tempmon { +> > +???????????????????????????????compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; +> > +???????????????????????????????interrupts = ; +> > +???????????????????????????????fsl,tempmon = <&anatop>; +> > +???????????????????????????????fsl,tempmon-data = <&ocotp>; +> > +???????????????????????????????clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; > Does the IMX6UL_CLK_PLL3_USB_OTG clock really control tempmon? Please > double check. @@ -17,7 +17,7 @@ stuff like USB but not only that. My understanding is the _USB_OTG suffix is descriptive, similar to PLL4_AUDIO and PLL6_ENET. Other non- usb components use PLL3 (like UART) but through other gates/dividers. -Setting this to IMX6UL_CLK_DUMMY will cause temperature reads to fail. +Setting this to?IMX6UL_CLK_DUMMY will cause temperature reads to fail. Even if PLL3 usually ends up being constantly enabled because of uarts this is not true at imx_thermal_probe time (or uarts can be disabled). diff --git a/a/content_digest b/N1/content_digest index 1549450..8a19363 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,31 +1,22 @@ "ref\07055ce6095c0b7f026ac6f0dc37e43fc5c0b1793.1496939031.git.leonard.crestez@nxp.com\0" "ref\0b9b91617985607f24c4986bcad5199483805d6b7.1496939031.git.leonard.crestez@nxp.com\0" "ref\0CAOMZO5BP4fPyzDmSg+DFLRYh3QMf-8T0gqvnZn6mEMt-QqSgfw@mail.gmail.com\0" - "From\0Leonard Crestez <leonard.crestez@nxp.com>\0" - "Subject\0Re: [PATCH 2/2] ARM: dts: imx6ul: Add imx6ul-tempmon\0" + "From\0leonard.crestez@nxp.com (Leonard Crestez)\0" + "Subject\0[PATCH 2/2] ARM: dts: imx6ul: Add imx6ul-tempmon\0" "Date\0Fri, 9 Jun 2017 13:58:15 +0300\0" - "To\0Fabio Estevam <festevam@gmail.com>\0" - "Cc\0Shawn Guo <shawnguo@kernel.org>" - Bai Ping <ping.bai@nxp.com> - linux-pm@vger.kernel.org <linux-pm@vger.kernel.org> - linux-kernel <linux-kernel@vger.kernel.org> - Eduardo Valentin <edubezval@gmail.com> - Sascha Hauer <kernel@pengutronix.de> - Fabio Estevam <fabio.estevam@nxp.com> - Zhang Rui <rui.zhang@intel.com> - " linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On Thu, 2017-06-08 at 13:45 -0300, Fabio Estevam wrote:\n" "> On Thu, Jun 8, 2017 at 1:26 PM, Leonard Crestez wrote:\n" "> \n" "> > \n" - "> > +\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240tempmon: tempmon {\n" - "> > +\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240compatible = \"fsl,imx6ul-tempmon\", \"fsl,imx6sx-tempmon\";\n" - "> > +\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240interrupts = ;\n" - "> > +\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240fsl,tempmon = <&anatop>;\n" - "> > +\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240fsl,tempmon-data = <&ocotp>;\n" - "> > +\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;\n" + "> > +???????????????????????tempmon: tempmon {\n" + "> > +???????????????????????????????compatible = \"fsl,imx6ul-tempmon\", \"fsl,imx6sx-tempmon\";\n" + "> > +???????????????????????????????interrupts = ;\n" + "> > +???????????????????????????????fsl,tempmon = <&anatop>;\n" + "> > +???????????????????????????????fsl,tempmon-data = <&ocotp>;\n" + "> > +???????????????????????????????clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;\n" "> Does the IMX6UL_CLK_PLL3_USB_OTG clock really control tempmon? Please\n" "> double check.\n" "\n" @@ -35,7 +26,7 @@ "suffix is descriptive, similar to PLL4_AUDIO and PLL6_ENET. Other non-\n" "usb components use PLL3 (like UART) but through other gates/dividers.\n" "\n" - "Setting this to\302\240IMX6UL_CLK_DUMMY will cause temperature reads to fail.\n" + "Setting this to?IMX6UL_CLK_DUMMY will cause temperature reads to fail.\n" "Even if PLL3 usually ends up being constantly enabled because of uarts\n" "this is not true at imx_thermal_probe time (or uarts can be disabled).\n" "\n" @@ -43,4 +34,4 @@ "Regards,\n" Leonard -91429af7ed31d2074cf240235f37e797aacc62a1ce19b3e3538c70bb7d4e47b7 +fb70375fea6c7db831793ab0ffa03c6c321200e7c6353731cca9b1e4911d64ef
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.