From: Arun Parameswaran <arun.parameswaran@broadcom.com>
To: Richard Cochran <richardcochran@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com,
Arun Parameswaran <arun.parameswaran@broadcom.com>
Subject: [PATCH v1 2/2] ptp: Add a ptp clock driver for Broadcom DTE
Date: Mon, 12 Jun 2017 13:26:01 -0700 [thread overview]
Message-ID: <1497299161-6458-3-git-send-email-arun.parameswaran@broadcom.com> (raw)
In-Reply-To: <1497299161-6458-1-git-send-email-arun.parameswaran@broadcom.com>
This patch adds a ptp clock driver for the Broadcom SoCs using
the Digital timing Engine (DTE) nco.
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
---
drivers/ptp/Kconfig | 16 +++
drivers/ptp/Makefile | 1 +
drivers/ptp/ptp_dte.c | 353 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 370 insertions(+)
create mode 100644 drivers/ptp/ptp_dte.c
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 384f661..a21ad10 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -25,6 +25,22 @@ config PTP_1588_CLOCK
To compile this driver as a module, choose M here: the module
will be called ptp.
+config PTP_1588_CLOCK_DTE
+ tristate "Broadcom DTE as PTP clock"
+ depends on PTP_1588_CLOCK
+ depends on NET && HAS_IOMEM
+ depends on ARCH_BCM_MOBILE || (ARCH_BCM_IPROC && !(ARCH_BCM_NSP || ARCH_BCM_5301X)) || COMPILE_TEST
+ default y
+ help
+ This driver adds support for using the Digital timing engine
+ (DTE) in the Broadcom SoC's as a PTP clock.
+
+ The clock can be used in both wired and wireless networks
+ for PTP purposes.
+
+ To compile this driver as a module, choose M here: the module
+ will be called ptp_dte.
+
config PTP_1588_CLOCK_GIANFAR
tristate "Freescale eTSEC as PTP clock"
depends on GIANFAR
diff --git a/drivers/ptp/Makefile b/drivers/ptp/Makefile
index 5307361..d1f2fb1 100644
--- a/drivers/ptp/Makefile
+++ b/drivers/ptp/Makefile
@@ -4,6 +4,7 @@
ptp-y := ptp_clock.o ptp_chardev.o ptp_sysfs.o
obj-$(CONFIG_PTP_1588_CLOCK) += ptp.o
+obj-$(CONFIG_PTP_1588_CLOCK_DTE) += ptp_dte.o
obj-$(CONFIG_PTP_1588_CLOCK_IXP46X) += ptp_ixp46x.o
obj-$(CONFIG_PTP_1588_CLOCK_PCH) += ptp_pch.o
obj-$(CONFIG_PTP_1588_CLOCK_KVM) += ptp_kvm.o
diff --git a/drivers/ptp/ptp_dte.c b/drivers/ptp/ptp_dte.c
new file mode 100644
index 0000000..00145a3
--- /dev/null
+++ b/drivers/ptp/ptp_dte.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/types.h>
+
+#define DTE_NCO_LOW_TIME_REG 0x00
+#define DTE_NCO_TIME_REG 0x04
+#define DTE_NCO_OVERFLOW_REG 0x08
+#define DTE_NCO_INC_REG 0x0c
+
+#define DTE_NCO_SUM2_MASK 0xffffffff
+#define DTE_NCO_SUM2_SHIFT 4ULL
+
+#define DTE_NCO_SUM3_MASK 0xff
+#define DTE_NCO_SUM3_SHIFT 36ULL
+#define DTE_NCO_SUM3_WR_SHIFT 8
+
+#define DTE_NCO_TS_WRAP_MASK 0xfff
+#define DTE_NCO_TS_WRAP_LSHIFT 32
+
+#define DTE_NCO_INC_DEFAULT 0x80000000
+#define DTE_NUM_REGS_TO_RESTORE 4
+
+/* Full wrap around is 44bits in ns (~4.887 hrs) */
+#define DTE_WRAP_AROUND_NSEC_SHIFT 44
+
+/* 44 bits NCO */
+#define DTE_NCO_MAX_NS 0xFFFFFFFFFFF
+
+/* 125MHz with 3.29 reg cfg */
+#define DTE_PPB_ADJ(ppb) (u32)(div64_u64((((u64)abs(ppb) * BIT(28)) +\
+ 62500000ULL), 125000000ULL))
+
+/* ptp dte priv structure */
+struct ptp_dte {
+ void __iomem *regs;
+ struct ptp_clock *ptp_clk;
+ struct ptp_clock_info caps;
+ struct device *dev;
+ u32 ts_ovf_last;
+ u32 ts_wrap_cnt;
+ spinlock_t lock;
+ u32 reg_val[DTE_NUM_REGS_TO_RESTORE];
+};
+
+static void dte_write_nco(void __iomem *regs, s64 ns)
+{
+ u32 sum2, sum3;
+
+ sum2 = (u32)((ns >> DTE_NCO_SUM2_SHIFT) & DTE_NCO_SUM2_MASK);
+ /* compensate for ignoring sum1 */
+ if (sum2 != DTE_NCO_SUM2_MASK)
+ sum2++;
+
+ /* to write sum3, bits [15:8] needs to be written */
+ sum3 = (u32)(((ns >> DTE_NCO_SUM3_SHIFT) & DTE_NCO_SUM3_MASK) <<
+ DTE_NCO_SUM3_WR_SHIFT);
+
+ writel(0, (regs + DTE_NCO_LOW_TIME_REG));
+ writel(sum2, (regs + DTE_NCO_TIME_REG));
+ writel(sum3, (regs + DTE_NCO_OVERFLOW_REG));
+}
+
+static s64 dte_read_nco(void __iomem *regs)
+{
+ u32 sum2, sum3;
+ s64 ns;
+
+ /*
+ * ignoring sum1 (4 bits) gives a 16ns resolution, which
+ * works due to the async register read.
+ */
+ sum3 = readl(regs + DTE_NCO_OVERFLOW_REG) & DTE_NCO_SUM3_MASK;
+ sum2 = readl(regs + DTE_NCO_TIME_REG);
+ ns = ((s64)sum3 << DTE_NCO_SUM3_SHIFT) |
+ ((s64)sum2 << DTE_NCO_SUM2_SHIFT);
+
+ return ns;
+}
+
+static void dte_write_nco_delta(struct ptp_dte *ptp_dte, s64 delta)
+{
+ s64 ns;
+
+ ns = dte_read_nco(ptp_dte->regs);
+
+ /* handle wraparound conditions */
+ if ((delta < 0) && (abs(delta) > ns)) {
+ if (ptp_dte->ts_wrap_cnt) {
+ ns += DTE_NCO_MAX_NS + delta;
+ ptp_dte->ts_wrap_cnt--;
+ } else {
+ ns = 0;
+ }
+ } else {
+ ns += delta;
+ if (ns > DTE_NCO_MAX_NS) {
+ ptp_dte->ts_wrap_cnt++;
+ ns -= DTE_NCO_MAX_NS;
+ }
+ }
+
+ dte_write_nco(ptp_dte->regs, ns);
+
+ ptp_dte->ts_ovf_last = (ns >> DTE_NCO_TS_WRAP_LSHIFT) &
+ DTE_NCO_TS_WRAP_MASK;
+}
+
+static s64 dte_read_nco_with_ovf(struct ptp_dte *ptp_dte)
+{
+ u32 ts_ovf;
+ s64 ns = 0;
+
+ ns = dte_read_nco(ptp_dte->regs);
+
+ /*Timestamp overflow: 8 LSB bits of sum3, 4 MSB bits of sum2 */
+ ts_ovf = (ns >> DTE_NCO_TS_WRAP_LSHIFT) & DTE_NCO_TS_WRAP_MASK;
+
+ /* Check for wrap around */
+ if (ts_ovf < ptp_dte->ts_ovf_last)
+ ptp_dte->ts_wrap_cnt++;
+
+ ptp_dte->ts_ovf_last = ts_ovf;
+
+ /* adjust for wraparounds */
+ ns += (s64)(BIT_ULL(DTE_WRAP_AROUND_NSEC_SHIFT) * ptp_dte->ts_wrap_cnt);
+
+ return ns;
+}
+
+static int ptp_dte_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
+{
+ u32 nco_incr;
+ unsigned long flags;
+ struct ptp_dte *ptp_dte = container_of(ptp, struct ptp_dte, caps);
+
+ if (abs(ppb) > ptp_dte->caps.max_adj) {
+ dev_err(ptp_dte->dev, "ppb adj too big\n");
+ return -EINVAL;
+ }
+
+ if (ppb < 0)
+ nco_incr = DTE_NCO_INC_DEFAULT - DTE_PPB_ADJ(ppb);
+ else
+ nco_incr = DTE_NCO_INC_DEFAULT + DTE_PPB_ADJ(ppb);
+
+ spin_lock_irqsave(&ptp_dte->lock, flags);
+ writel(nco_incr, ptp_dte->regs + DTE_NCO_INC_REG);
+ spin_unlock_irqrestore(&ptp_dte->lock, flags);
+
+ return 0;
+}
+
+static int ptp_dte_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ unsigned long flags;
+ struct ptp_dte *ptp_dte = container_of(ptp, struct ptp_dte, caps);
+
+ spin_lock_irqsave(&ptp_dte->lock, flags);
+ dte_write_nco_delta(ptp_dte, delta);
+ spin_unlock_irqrestore(&ptp_dte->lock, flags);
+
+ return 0;
+}
+
+static int ptp_dte_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
+{
+ unsigned long flags;
+ struct ptp_dte *ptp_dte = container_of(ptp, struct ptp_dte, caps);
+
+ spin_lock_irqsave(&ptp_dte->lock, flags);
+ *ts = ns_to_timespec64(dte_read_nco_with_ovf(ptp_dte));
+ spin_unlock_irqrestore(&ptp_dte->lock, flags);
+
+ return 0;
+}
+
+static int ptp_dte_settime(struct ptp_clock_info *ptp,
+ const struct timespec64 *ts)
+{
+ unsigned long flags;
+ struct ptp_dte *ptp_dte = container_of(ptp, struct ptp_dte, caps);
+
+ spin_lock_irqsave(&ptp_dte->lock, flags);
+
+ /* Disable nco increment */
+ writel(0, ptp_dte->regs + DTE_NCO_INC_REG);
+
+ dte_write_nco(ptp_dte->regs, timespec64_to_ns(ts));
+
+ /* reset overflow and wrap counter */
+ ptp_dte->ts_ovf_last = 0;
+ ptp_dte->ts_wrap_cnt = 0;
+
+ /* Enable nco increment */
+ writel(DTE_NCO_INC_DEFAULT, ptp_dte->regs + DTE_NCO_INC_REG);
+
+ spin_unlock_irqrestore(&ptp_dte->lock, flags);
+
+ return 0;
+}
+
+static int ptp_dte_enable(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *rq, int on)
+{
+ return -EOPNOTSUPP;
+}
+
+static struct ptp_clock_info ptp_dte_caps = {
+ .owner = THIS_MODULE,
+ .name = "DTE PTP timer",
+ .max_adj = 50000000,
+ .n_ext_ts = 0,
+ .n_pins = 0,
+ .pps = 0,
+ .adjfreq = ptp_dte_adjfreq,
+ .adjtime = ptp_dte_adjtime,
+ .gettime64 = ptp_dte_gettime,
+ .settime64 = ptp_dte_settime,
+ .enable = ptp_dte_enable,
+};
+
+static int ptp_dte_probe(struct platform_device *pdev)
+{
+ struct ptp_dte *ptp_dte;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+
+ ptp_dte = devm_kzalloc(dev, sizeof(struct ptp_dte), GFP_KERNEL);
+ if (!ptp_dte)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ptp_dte->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ptp_dte->regs)) {
+ dev_err(dev,
+ "%s: io remap failed\n", __func__);
+ return PTR_ERR(ptp_dte->regs);
+ }
+
+ spin_lock_init(&ptp_dte->lock);
+
+ ptp_dte->dev = dev;
+ ptp_dte->caps = ptp_dte_caps;
+ ptp_dte->ptp_clk = ptp_clock_register(&ptp_dte->caps, &pdev->dev);
+ if (IS_ERR(ptp_dte->ptp_clk)) {
+ dev_err(dev,
+ "%s: Failed to register ptp clock\n", __func__);
+ return PTR_ERR(ptp_dte->ptp_clk);
+ }
+
+ platform_set_drvdata(pdev, ptp_dte);
+
+ dev_info(dev, "ptp clk probe done\n");
+
+ return 0;
+}
+
+static int ptp_dte_remove(struct platform_device *pdev)
+{
+ struct ptp_dte *ptp_dte = platform_get_drvdata(pdev);
+ u8 i;
+
+ ptp_clock_unregister(ptp_dte->ptp_clk);
+
+ for (i = 0; i < DTE_NUM_REGS_TO_RESTORE; i++)
+ writel(0, ptp_dte->regs + (i * sizeof(u32)));
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ptp_dte_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ptp_dte *ptp_dte = platform_get_drvdata(pdev);
+ u8 i;
+
+ for (i = 0; i < DTE_NUM_REGS_TO_RESTORE; i++) {
+ ptp_dte->reg_val[i] =
+ readl(ptp_dte->regs + (i * sizeof(u32)));
+ }
+
+ /* disable the nco */
+ writel(0, ptp_dte->regs + DTE_NCO_INC_REG);
+
+ return 0;
+}
+
+static int ptp_dte_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ptp_dte *ptp_dte = platform_get_drvdata(pdev);
+ u8 i;
+
+ for (i = 0; i < DTE_NUM_REGS_TO_RESTORE; i++) {
+ if ((i * sizeof(u32)) != DTE_NCO_OVERFLOW_REG)
+ writel(ptp_dte->reg_val[i],
+ (ptp_dte->regs + (i * sizeof(u32))));
+ else
+ writel(((ptp_dte->reg_val[i] &
+ DTE_NCO_SUM3_MASK) << DTE_NCO_SUM3_WR_SHIFT),
+ (ptp_dte->regs + (i * sizeof(u32))));
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops ptp_dte_pm_ops = {
+ .suspend = ptp_dte_suspend,
+ .resume = ptp_dte_resume
+};
+
+#define PTP_DTE_PM_OPS (&ptp_dte_pm_ops)
+#else
+#define PTP_DTE_PM_OPS NULL
+#endif
+
+static const struct of_device_id ptp_dte_of_match[] = {
+ { .compatible = "brcm,ptp-dte", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ptp_dte_of_match);
+
+static struct platform_driver ptp_dte_driver = {
+ .driver = {
+ .name = "ptp-dte",
+ .pm = PTP_DTE_PM_OPS,
+ .of_match_table = ptp_dte_of_match,
+ },
+ .probe = ptp_dte_probe,
+ .remove = ptp_dte_remove,
+};
+module_platform_driver(ptp_dte_driver);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Broadcom DTE PTP Clock driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
next prev parent reply other threads:[~2017-06-12 20:26 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-12 20:25 [PATCH v1 0/2] Add support for Broadcom DTE based PTP clock Arun Parameswaran
2017-06-12 20:25 ` Arun Parameswaran
2017-06-12 20:26 ` [PATCH v1 1/2] dt-binding: ptp: add bindings document for dte based ptp clock Arun Parameswaran
2017-06-13 5:09 ` Richard Cochran
[not found] ` <20170613050947.GA1684-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2017-06-13 17:46 ` Arun Parameswaran
2017-06-13 17:46 ` Arun Parameswaran
[not found] ` <cb008f0f-1585-653e-0b89-47478f9f4734-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-06-14 18:18 ` Ray Jui
2017-06-14 18:18 ` Ray Jui
[not found] ` <a4586d75-2aca-94f3-ab7a-fc94c9dc5a4a-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-06-14 18:33 ` Arun Parameswaran
2017-06-14 18:33 ` Arun Parameswaran
2017-06-14 18:39 ` Arun Parameswaran
2017-06-14 18:39 ` Arun Parameswaran
[not found] ` <1497299161-6458-2-git-send-email-arun.parameswaran-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-06-18 14:04 ` Rob Herring
2017-06-18 14:04 ` Rob Herring
2017-06-19 16:50 ` Arun Parameswaran
2017-06-19 16:50 ` Arun Parameswaran
2017-06-20 20:48 ` Scott Branden
2017-06-20 20:48 ` Scott Branden
[not found] ` <74b85a32-63c5-b7c5-47a2-831504be318e-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-06-22 3:19 ` Rob Herring
2017-06-22 3:19 ` Rob Herring
[not found] ` <CAL_JsqKddhWMXEaoxt=3_d+-STFH-OataxSgnnj9Q4A0Eqqwxg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-23 0:42 ` Scott Branden
2017-06-23 0:42 ` Scott Branden
[not found] ` <1abad545-ee20-e047-8cb6-b130ad037213-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-06-23 1:04 ` Florian Fainelli
2017-06-23 1:04 ` Florian Fainelli
2017-06-27 5:10 ` Scott Branden
[not found] ` <7bb41c9b-20d8-6003-8a0f-b09f0071ed71-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-06-29 22:40 ` Rob Herring
2017-06-29 22:40 ` Rob Herring
[not found] ` <CAL_Jsq+qaawVuX=oX=+LrM-nO7Q37osL05WL9b0mV5msLyG9yg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-30 1:05 ` Scott Branden
2017-06-30 1:05 ` Scott Branden
2017-06-12 20:26 ` Arun Parameswaran [this message]
[not found] ` <1497299161-6458-1-git-send-email-arun.parameswaran-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-06-15 16:07 ` [PATCH v1 0/2] Add support for Broadcom DTE based PTP clock David Miller
2017-06-15 16:07 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1497299161-6458-3-git-send-email-arun.parameswaran@broadcom.com \
--to=arun.parameswaran@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.