All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: jtleight@udel.edu, alexander.levin@verizon.com,
	davem@davemloft.net, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ipv6: Handle IPv4-mapped src to in6addr_any dst." has been added to the 3.18-stable tree
Date: Thu, 15 Jun 2017 09:39:48 +0200	[thread overview]
Message-ID: <149751238819756@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    ipv6: Handle IPv4-mapped src to in6addr_any dst.

to the 3.18-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     ipv6-handle-ipv4-mapped-src-to-in6addr_any-dst.patch
and it can be found in the queue-3.18 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Thu Jun 15 09:38:54 CEST 2017
From: "Jonathan T. Leighton" <jtleight@udel.edu>
Date: Tue, 23 May 2017 21:53:33 -0400
Subject: ipv6: Handle IPv4-mapped src to in6addr_any dst.

From: "Jonathan T. Leighton" <jtleight@udel.edu>


[ Upstream commit 052d2369d1b479cdbbe020fdd6d057d3c342db74 ]

This patch adds a check on the type of the source address for the case
where the destination address is in6addr_any. If the source is an
IPv4-mapped IPv6 source address, the destination is changed to
::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This
is done in three locations to handle UDP calls to either connect() or
sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays
handling an in6addr_any destination until very late, so the patch only
needs to handle the case where the source is an IPv4-mapped IPv6
address.

Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/datagram.c |   14 +++++++++-----
 net/ipv6/tcp_ipv6.c |   11 ++++++++---
 net/ipv6/udp.c      |    4 ++++
 3 files changed, 21 insertions(+), 8 deletions(-)

--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -76,18 +76,22 @@ static int __ip6_datagram_connect(struct
 		}
 	}
 
-	addr_type = ipv6_addr_type(&usin->sin6_addr);
-
-	if (addr_type == IPV6_ADDR_ANY) {
+	if (ipv6_addr_any(&usin->sin6_addr)) {
 		/*
 		 *	connect to self
 		 */
-		usin->sin6_addr.s6_addr[15] = 0x01;
+		if (ipv6_addr_v4mapped(&sk->sk_v6_rcv_saddr))
+			ipv6_addr_set_v4mapped(htonl(INADDR_LOOPBACK),
+					       &usin->sin6_addr);
+		else
+			usin->sin6_addr = in6addr_loopback;
 	}
 
+	addr_type = ipv6_addr_type(&usin->sin6_addr);
+
 	daddr = &usin->sin6_addr;
 
-	if (addr_type == IPV6_ADDR_MAPPED) {
+	if (addr_type & IPV6_ADDR_MAPPED) {
 		struct sockaddr_in sin;
 
 		if (__ipv6_only_sock(sk)) {
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -164,8 +164,13 @@ static int tcp_v6_connect(struct sock *s
 	 *	connect() to INADDR_ANY means loopback (BSD'ism).
 	 */
 
-	if (ipv6_addr_any(&usin->sin6_addr))
-		usin->sin6_addr.s6_addr[15] = 0x1;
+	if (ipv6_addr_any(&usin->sin6_addr)) {
+		if (ipv6_addr_v4mapped(&sk->sk_v6_rcv_saddr))
+			ipv6_addr_set_v4mapped(htonl(INADDR_LOOPBACK),
+					       &usin->sin6_addr);
+		else
+			usin->sin6_addr = in6addr_loopback;
+	}
 
 	addr_type = ipv6_addr_type(&usin->sin6_addr);
 
@@ -204,7 +209,7 @@ static int tcp_v6_connect(struct sock *s
 	 *	TCP over IPv4
 	 */
 
-	if (addr_type == IPV6_ADDR_MAPPED) {
+	if (addr_type & IPV6_ADDR_MAPPED) {
 		u32 exthdrlen = icsk->icsk_ext_hdr_len;
 		struct sockaddr_in sin;
 
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1107,6 +1107,10 @@ int udpv6_sendmsg(struct kiocb *iocb, st
 			if (addr_len < SIN6_LEN_RFC2133)
 				return -EINVAL;
 			daddr = &sin6->sin6_addr;
+			if (ipv6_addr_any(daddr) &&
+			    ipv6_addr_v4mapped(&np->saddr))
+				ipv6_addr_set_v4mapped(htonl(INADDR_LOOPBACK),
+						       daddr);
 			break;
 		case AF_INET:
 			goto do_udp_sendmsg;


Patches currently in stable-queue which might be from jtleight@udel.edu are

queue-3.18/ipv6-inhibit-ipv4-mapped-src-address-on-the-wire.patch
queue-3.18/ipv6-handle-ipv4-mapped-src-to-in6addr_any-dst.patch

                 reply	other threads:[~2017-06-15  7:39 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=149751238819756@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=alexander.levin@verizon.com \
    --cc=davem@davemloft.net \
    --cc=jtleight@udel.edu \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.