All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lyude Paul <lyude@redhat.com>
To: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>,
	intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH i-g-t v2] tests/chamelium: Add common suspend and hibernate tests for DP and HDMI
Date: Fri, 16 Jun 2017 19:28:09 -0400	[thread overview]
Message-ID: <1497655689.18958.8.camel@redhat.com> (raw)
In-Reply-To: <20170616141720.16239-1-paul.kocialkowski@linux.intel.com>

On Fri, 2017-06-16 at 17:17 +0300, Paul Kocialkowski wrote:
> This adds two new tests: common-hpd-after-suspend and
> common-hpd-after-hibernate that are aimed at testing HPD change during
> suspend/hibernate for both DP and HDMI, at the same time.
> 
> The interest in bringing this test up is to reduce the time spent in
> testing, with the downside of less precision regarding the test's
> outcome. The per-connector tests are still available to get a more
> precise idea of which connector causes a failure, when that happens.
> 
> VGA is explicitly excluded from this test as there is currently no
> way of doing delayed hpd pulses for it.
> 
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
> ---
>  tests/chamelium.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
> 
> diff --git a/tests/chamelium.c b/tests/chamelium.c
> index 76b14e95..d569c8ee 100644
> --- a/tests/chamelium.c
> +++ b/tests/chamelium.c
> @@ -241,6 +241,80 @@ test_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
>  }
>  
>  static void
> +test_suspend_resume_hpd_common(data_t *data, enum igt_suspend_state state,
> +			       enum igt_suspend_test test)
> +{
> +	struct udev_monitor *mon = igt_watch_hotplug();
> +	struct chamelium_port *port;
> +	int p;
> +
> +	for (p = 0; p < data->port_count; p++) {
> +		port = data->ports[p];
> +		if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
> +			continue;
> +
> +		reset_state(data, port);
> +
> +		igt_debug("Testing port %s\n", chamelium_port_get_name(port));
> +	}
> +
> +	igt_set_autoresume_delay(SUSPEND_RESUME_DELAY);
> +	igt_flush_hotplugs(mon);
> +
> +	/* Make sure we notice new connectors after resuming */
> +	for (p = 0; p < data->port_count; p++) {
> +		port = data->ports[p];
> +		if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
> +			continue;
> +
> +		chamelium_async_hpd_pulse_start(data->chamelium, port, false,
> +						SUSPEND_RESUME_DELAY / 2);
> +	}
> +
> +	igt_system_suspend_autoresume(state, test);
> +	chamelium_async_hpd_pulse_finish(data->chamelium);
> +
> +	igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
> +
> +	for (p = 0; p < data->port_count; p++) {
> +		port = data->ports[p];
> +		if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
> +			continue;
> +
> +		igt_assert_eq(reprobe_connector(data, port),
> +			      DRM_MODE_CONNECTED);
> +	}
> +
> +	igt_flush_hotplugs(mon);
> +
> +	/* Now make sure we notice disconnected connectors after resuming */
> +	for (p = 0; p < data->port_count; p++) {
> +		port = data->ports[p];
> +		if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
> +			continue;
> +
> +		chamelium_async_hpd_pulse_start(data->chamelium, port, true,
> +						SUSPEND_RESUME_DELAY / 2);
> +	}
> +
> +	igt_system_suspend_autoresume(state, test);
> +	chamelium_async_hpd_pulse_finish(data->chamelium);
> +
> +	igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
> +
> +	for (p = 0; p < data->port_count; p++) {
> +		port = data->ports[p];
> +		if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
> +			continue;
> +
> +		igt_assert_eq(reprobe_connector(data, port),
> +			      DRM_MODE_DISCONNECTED);
> +	}
> +
> +	igt_cleanup_hotplug(mon);
> +}
> +
> +static void

For smaller bits of code this isn't a big deal since we're talking
about tests here, but this is a lot of code to have for a single
function like this. Mind splitting this into something like (feel free
to take some liberty with the function naming)

test_suspend_resume_hpd(data_t *data, enum igt_suspend_state state, enum igt_suspend_test test)
  → try_suspend_resume_hpd(data_t *data, enum igt_suspend_state state, enum igt_suspend_test test, bool connected)

Other then that, looks good. With the changes mentioned:

Reviewed-by: Lyude Paul <lyude@redhat.com>

>  test_suspend_resume_edid_change(data_t *data, struct chamelium_port *port,
>  				enum igt_suspend_state state,
>  				enum igt_suspend_test test,
> @@ -750,6 +824,18 @@ igt_main
>  			test_hpd_without_ddc(&data, port);
>  	}
>  
> +	igt_subtest_group {
> +		igt_subtest("common-hpd-after-suspend")
> +			test_suspend_resume_hpd_common(&data,
> +						       SUSPEND_STATE_MEM,
> +						       SUSPEND_TEST_NONE);
> +
> +		igt_subtest("common-hpd-after-hibernate")
> +			test_suspend_resume_hpd_common(&data,
> +						       SUSPEND_STATE_DISK,
> +						       SUSPEND_TEST_DEVICES);
> +	}
> +
>  	igt_fixture {
>  		close(data.drm_fd);
>  	}
-- 
Cheers,
	Lyude
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-06-16 23:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-16 14:17 [PATCH i-g-t v2] tests/chamelium: Add common suspend and hibernate tests for DP and HDMI Paul Kocialkowski
2017-06-16 23:28 ` Lyude Paul [this message]
2017-06-19  9:08   ` Paul Kocialkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1497655689.18958.8.camel@redhat.com \
    --to=lyude@redhat.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paul.kocialkowski@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.