From: Thomas Huth <thuth@redhat.com>
To: qemu-devel@nongnu.org, Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>,
Farhan Ali <alifm@linux.vnet.ibm.com>,
David Hildenbrand <david@redhat.com>,
Jens Freimann <jfreiman@redhat.com>,
Eric Farman <farman@linux.vnet.ibm.com>
Subject: [Qemu-devel] [RFC PATCH 07/14] libnet: Rework error message printing
Date: Tue, 27 Jun 2017 13:48:13 +0200 [thread overview]
Message-ID: <1498564100-10045-8-git-send-email-thuth@redhat.com> (raw)
In-Reply-To: <1498564100-10045-1-git-send-email-thuth@redhat.com>
There is a repetive pattern of code in netload.c to print out
error message: snprintf(buf, ...) + bootmsg_error() + write_mm_log().
The code can be simplified / shortened quite a bit by consolidating
this pattern in a helper function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
pc-bios/s390-ccw/libnet/netload.c | 126 +++++++++++++-------------------------
1 file changed, 44 insertions(+), 82 deletions(-)
diff --git a/pc-bios/s390-ccw/libnet/netload.c b/pc-bios/s390-ccw/libnet/netload.c
index cd3720a..8afe341 100644
--- a/pc-bios/s390-ccw/libnet/netload.c
+++ b/pc-bios/s390-ccw/libnet/netload.c
@@ -52,6 +52,23 @@ typedef struct {
int tftp_retries;
} obp_tftp_args_t;
+/**
+ * Print error with preceeding error code
+ */
+static void netload_error(int errcode, const char *format, ...)
+{
+ va_list vargs;
+ char buf[256];
+
+ sprintf(buf, "E%04X: (net) ", errcode);
+
+ va_start(vargs, format);
+ vsnprintf(&buf[13], sizeof(buf) - 13, format, vargs);
+ va_end(vargs);
+
+ bootmsg_error(errcode, &buf[7]);
+ write_mm_log(buf, strlen(buf), 0x91);
+}
/**
* Parses a argument string for IPv6 booting, extracts all
@@ -389,7 +406,6 @@ static void seed_rng(uint8_t mac[])
int netload(char *buffer, int len, char *ret_buffer, int huge_load,
int block_size, char *args_fs, int alen)
{
- char buf[256];
int rc;
filename_ip_t fn_ip;
int fd_device;
@@ -427,17 +443,11 @@ int netload(char *buffer, int len, char *ret_buffer, int huge_load,
}
if (fd_device == -1) {
- strcpy(buf,"E3000: (net) Could not read MAC address");
- bootmsg_error(0x3000, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3000, "Could not read MAC address");
return -100;
}
else if (fd_device == -2) {
- strcpy(buf,"E3006: (net) Could not initialize network device");
- bootmsg_error(0x3006, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3006, "Could not initialize network device");
return -101;
}
@@ -567,10 +577,7 @@ int netload(char *buffer, int len, char *ret_buffer, int huge_load,
memcpy(&fn_ip.server_ip6.addr, &obp_tftp_args.si6addr.addr, 16);
}
if (rc == -1) {
- strcpy(buf,"E3001: (net) Could not get IP address");
- bootmsg_error(0x3001, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3001, "Could not get IP address");
close(fn_ip.fd);
return -101;
}
@@ -586,29 +593,21 @@ int netload(char *buffer, int len, char *ret_buffer, int huge_load,
}
if (rc == -2) {
- sprintf(buf,
- "E3002: (net) ARP request to TFTP server "
+ netload_error(0x3002, "ARP request to TFTP server "
"(%d.%d.%d.%d) failed",
((fn_ip.server_ip >> 24) & 0xFF),
((fn_ip.server_ip >> 16) & 0xFF),
((fn_ip.server_ip >> 8) & 0xFF),
( fn_ip.server_ip & 0xFF));
- bootmsg_error(0x3002, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
close(fn_ip.fd);
return -102;
}
if (rc == -4 || rc == -3) {
- strcpy(buf,"E3008: (net) Can't obtain TFTP server IP address");
- bootmsg_error(0x3008, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3008, "Can't obtain TFTP server IP address");
close(fn_ip.fd);
return -107;
}
-
/***********************************************************
*
* Load file via TFTP into buffer provided by OpenFirmware
@@ -649,114 +648,77 @@ int netload(char *buffer, int len, char *ret_buffer, int huge_load,
printf(" TFTP: Received %s (%d KBytes)\n", fn_ip.filename,
rc / 1024);
} else if (rc == -1) {
- bootmsg_error(0x3003, "(net) unknown TFTP error");
+ netload_error(0x3003, "unknown TFTP error");
return -103;
} else if (rc == -2) {
- sprintf(buf,
- "E3004: (net) TFTP buffer of %d bytes "
+ netload_error(0x3004, "TFTP buffer of %d bytes "
"is too small for %s",
len, fn_ip.filename);
- bootmsg_error(0x3004, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
return -104;
} else if (rc == -3) {
- sprintf(buf,"E3009: (net) file not found: %s",
- fn_ip.filename);
- bootmsg_error(0x3009, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3009, "file not found: %s",
+ fn_ip.filename);
return -108;
} else if (rc == -4) {
- strcpy(buf,"E3010: (net) TFTP access violation");
- bootmsg_error(0x3010, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3010, "TFTP access violation");
return -109;
} else if (rc == -5) {
- strcpy(buf,"E3011: (net) illegal TFTP operation");
- bootmsg_error(0x3011, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3011, "illegal TFTP operation");
return -110;
} else if (rc == -6) {
- strcpy(buf, "E3012: (net) unknown TFTP transfer ID");
- bootmsg_error(0x3012, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3012, "unknown TFTP transfer ID");
return -111;
} else if (rc == -7) {
- strcpy(buf, "E3013: (net) no such TFTP user");
- bootmsg_error(0x3013, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3013, "no such TFTP user");
return -112;
} else if (rc == -8) {
- strcpy(buf, "E3017: (net) TFTP blocksize negotiation failed");
- bootmsg_error(0x3017, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3017, "TFTP blocksize negotiation failed");
return -116;
} else if (rc == -9) {
- strcpy(buf,"E3018: (net) file exceeds maximum TFTP transfer size");
- bootmsg_error(0x3018, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3018, "file exceeds maximum TFTP transfer size");
return -117;
} else if (rc <= -10 && rc >= -15) {
- sprintf(buf,"E3005: (net) ICMP ERROR \"");
+ char *icmp_err_str;
switch (rc) {
case -ICMP_NET_UNREACHABLE - 10:
- sprintf(buf+strlen(buf),"net unreachable");
+ icmp_err_str = "net unreachable";
break;
case -ICMP_HOST_UNREACHABLE - 10:
- sprintf(buf+strlen(buf),"host unreachable");
+ icmp_err_str = "host unreachable";
break;
case -ICMP_PROTOCOL_UNREACHABLE - 10:
- sprintf(buf+strlen(buf),"protocol unreachable");
+ icmp_err_str = "protocol unreachable";
break;
case -ICMP_PORT_UNREACHABLE - 10:
- sprintf(buf+strlen(buf),"port unreachable");
+ icmp_err_str = "port unreachable";
break;
case -ICMP_FRAGMENTATION_NEEDED - 10:
- sprintf(buf+strlen(buf),"fragmentation needed and DF set");
+ icmp_err_str = "fragmentation needed and DF set";
break;
case -ICMP_SOURCE_ROUTE_FAILED - 10:
- sprintf(buf+strlen(buf),"source route failed");
+ icmp_err_str = "source route failed";
break;
default:
- sprintf(buf+strlen(buf)," UNKNOWN");
+ icmp_err_str = " UNKNOWN";
break;
}
- sprintf(buf+strlen(buf),"\"");
- bootmsg_error(0x3005, &buf[7]);
-
- write_mm_log(buf, strlen(buf), 0x91);
+ netload_error(0x3005, "ICMP ERROR \"%s\"", icmp_err_str);
return -105;
} else if (rc == -40) {
- sprintf(buf,
- "E3014: (net) TFTP error occurred after "
+ netload_error(0x3014, "TFTP error occurred after "
"%d bad packets received",
tftp_err.bad_tftp_packets);
- bootmsg_error(0x3014, &buf[7]);
- write_mm_log(buf, strlen(buf), 0x91);
return -113;
} else if (rc == -41) {
- sprintf(buf,
- "E3015: (net) TFTP error occurred after "
+ netload_error(0x3015, "TFTP error occurred after "
"missing %d responses",
tftp_err.no_packets);
- bootmsg_error(0x3015, &buf[7]);
- write_mm_log(buf, strlen(buf), 0x91);
return -114;
} else if (rc == -42) {
- sprintf(buf,
- "E3016: (net) TFTP error missing block %d, "
+ netload_error(0x3016, "TFTP error missing block %d, "
"expected block was %d",
tftp_err.blocks_missed,
tftp_err.blocks_received);
- bootmsg_error(0x3016, &buf[7]);
- write_mm_log(buf, strlen(buf), 0x91);
return -115;
}
return rc;
--
1.8.3.1
next prev parent reply other threads:[~2017-06-27 11:48 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-27 11:48 [Qemu-devel] [RFC PATCH 00/14] Implement network booting directly into the s390-ccw BIOS Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 01/14] pc-bios/s390-ccw: Add the libc from the SLOF firmware Thomas Huth
2017-06-27 15:32 ` David Hildenbrand
2017-06-27 22:14 ` Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 02/14] pc-bios/s390-ccw: Start using the libc from SLOF Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 03/14] pc-bios/s390-ccw: Add a write() function for stdio Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 04/14] pc-bios/s390-ccw: Add implementation of sbrk() Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 05/14] pc-bios/s390-ccw: Add the TFTP network loading stack from SLOF Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 06/14] libnet: Remove remainders of netsave code Thomas Huth
2017-06-27 11:48 ` Thomas Huth [this message]
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 08/14] libnet: Refactor some code of netload() into a separate function Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 09/14] pc-bios/s390-ccw: Make the basic libnet code compilable Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 10/14] pc-bios/s390-ccw: Add timer code for the libnet Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 11/14] pc-bios/s390-ccw: Add virtio-net driver code Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 12/14] pc-bios/s390-ccw: Load file via an intermediate .INS file Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 13/14] pc-bios/s390-ccw: Allow loading to address 0 Thomas Huth
2017-06-27 11:48 ` [Qemu-devel] [RFC PATCH 14/14] pc-bios/s390-ccw: Wire up the netload code Thomas Huth
2017-06-27 15:41 ` [Qemu-devel] [RFC PATCH 00/14] Implement network booting directly into the s390-ccw BIOS David Hildenbrand
2017-06-27 15:50 ` Viktor Mihajlovski
2017-06-27 21:40 ` Thomas Huth
2017-06-28 7:28 ` Viktor Mihajlovski
2017-06-28 8:02 ` Thomas Huth
2017-06-28 10:56 ` Thomas Huth
2017-06-28 15:02 ` Viktor Mihajlovski
2017-06-29 7:58 ` Thomas Huth
2017-06-29 8:10 ` Viktor Mihajlovski
2017-06-27 16:50 ` Farhan Ali
2017-06-28 7:34 ` Thomas Huth
2017-06-27 21:15 ` Alexander Graf
2017-06-27 21:56 ` Thomas Huth
2017-06-28 8:06 ` Gerd Hoffmann
2017-06-28 7:43 ` Christian Borntraeger
2017-06-28 8:59 ` Thomas Huth
2017-06-29 8:17 ` Thomas Huth
2017-06-29 8:39 ` Christian Borntraeger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498564100-10045-8-git-send-email-thuth@redhat.com \
--to=thuth@redhat.com \
--cc=agraf@suse.de \
--cc=alifm@linux.vnet.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=david@redhat.com \
--cc=farman@linux.vnet.ibm.com \
--cc=jfreiman@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.