From: Varadarajan Narayanan <varada@codeaurora.org>
To: robh+dt@kernel.org, mark.rutland@arm.com,
mturquette@baylibre.com, sboyd@codeaurora.org,
linus.walleij@linaro.org, andy.gross@linaro.org,
david.brown@linaro.org, catalin.marinas@arm.com,
will.deacon@arm.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: absahu@codeaurora.org, sjaganat@codeaurora.org,
sricharan@codeaurora.org,
Varadarajan Narayanan <varada@codeaurora.org>
Subject: [PATCH v7 0/4] Add minimal boot support for IPQ8074
Date: Thu, 29 Jun 2017 11:48:30 +0530 [thread overview]
Message-ID: <1498717114-338-1-git-send-email-varada@codeaurora.org> (raw)
v7:
Remove the following clk related patches (Stephen Boyd has picked them)
Incorporate Bjorn's comment in
arm64: dts: Add ipq8074 SoC and HK01 board support
Included Bjorn's and Rob's Ack for rest of the patches.
v6:
* Include Rob's Ack to the first patch.
v5:
* Removed the 'NA' binding from documentation
v4:
* Split the clock patch and addressed a minor comment
in the clock driver as per stephen's feedback.
v3:
* Addressed review feedback from Bjorn for pinctrl
- Unified the names for qpic pads.
- Corrected the names for pwm pins.
* Updated pinctrl documentation.
* Updated the default bootargs in ipq8074-hk01.dts.
* Updated the gcc clocks driver for removing the
unused halt_bit in few places.
v2:
* Addressed review feedback from Stephen
- Removed cpu-map entries
- Added mmio-timer nodes
* Fix sparse warnings in the gcc-ipq8074.c
* Updated pinctrl documentation
v1:
https://www.spinics.net/lists/kernel/msg2498734.html
This series adds minimal board boot support for ipq8074-hk01
board.
Abhishek Sahu (1):
arm64: defconfig: Enable qcom ipq8074 clock and pinctrl
Varadarajan Narayanan (3):
pinctrl: qcom: Add ipq8074 pinctrl driver
dt-bindings: qcom: Add ipq8074 bindings
arm64: dts: Add ipq8074 SoC and HK01 board support
Documentation/devicetree/bindings/arm/qcom.txt | 2 +
.../bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 172 ++++
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 52 +
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 194 ++++
arch/arm64/configs/defconfig | 2 +
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq8074.c | 1076 ++++++++++++++++++++
9 files changed, 1510 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq8074.c
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: varada@codeaurora.org (Varadarajan Narayanan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 0/4] Add minimal boot support for IPQ8074
Date: Thu, 29 Jun 2017 11:48:30 +0530 [thread overview]
Message-ID: <1498717114-338-1-git-send-email-varada@codeaurora.org> (raw)
v7:
Remove the following clk related patches (Stephen Boyd has picked them)
Incorporate Bjorn's comment in
arm64: dts: Add ipq8074 SoC and HK01 board support
Included Bjorn's and Rob's Ack for rest of the patches.
v6:
* Include Rob's Ack to the first patch.
v5:
* Removed the 'NA' binding from documentation
v4:
* Split the clock patch and addressed a minor comment
in the clock driver as per stephen's feedback.
v3:
* Addressed review feedback from Bjorn for pinctrl
- Unified the names for qpic pads.
- Corrected the names for pwm pins.
* Updated pinctrl documentation.
* Updated the default bootargs in ipq8074-hk01.dts.
* Updated the gcc clocks driver for removing the
unused halt_bit in few places.
v2:
* Addressed review feedback from Stephen
- Removed cpu-map entries
- Added mmio-timer nodes
* Fix sparse warnings in the gcc-ipq8074.c
* Updated pinctrl documentation
v1:
https://www.spinics.net/lists/kernel/msg2498734.html
This series adds minimal board boot support for ipq8074-hk01
board.
Abhishek Sahu (1):
arm64: defconfig: Enable qcom ipq8074 clock and pinctrl
Varadarajan Narayanan (3):
pinctrl: qcom: Add ipq8074 pinctrl driver
dt-bindings: qcom: Add ipq8074 bindings
arm64: dts: Add ipq8074 SoC and HK01 board support
Documentation/devicetree/bindings/arm/qcom.txt | 2 +
.../bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 172 ++++
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 52 +
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 194 ++++
arch/arm64/configs/defconfig | 2 +
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq8074.c | 1076 ++++++++++++++++++++
9 files changed, 1510 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq8074.c
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2017-06-29 6:18 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-29 6:18 Varadarajan Narayanan [this message]
2017-06-29 6:18 ` [PATCH v7 0/4] Add minimal boot support for IPQ8074 Varadarajan Narayanan
2017-06-29 6:18 ` [PATCH v7 1/4] pinctrl: qcom: Add ipq8074 pinctrl driver Varadarajan Narayanan
2017-06-29 6:18 ` Varadarajan Narayanan
2017-06-29 6:18 ` [PATCH v7 2/4] dt-bindings: qcom: Add ipq8074 bindings Varadarajan Narayanan
2017-06-29 6:18 ` Varadarajan Narayanan
2017-06-29 6:18 ` [PATCH v7 3/4] arm64: dts: Add ipq8074 SoC and HK01 board support Varadarajan Narayanan
2017-06-29 6:18 ` Varadarajan Narayanan
2017-06-30 13:06 ` kbuild test robot
2017-06-30 13:06 ` kbuild test robot
2017-06-30 13:06 ` kbuild test robot
2017-06-29 6:18 ` [PATCH v7 4/4] arm64: defconfig: Enable qcom ipq8074 clock and pinctrl Varadarajan Narayanan
2017-06-29 6:18 ` Varadarajan Narayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498717114-338-1-git-send-email-varada@codeaurora.org \
--to=varada@codeaurora.org \
--cc=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sjaganat@codeaurora.org \
--cc=sricharan@codeaurora.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.