From: Benjamin Drung <benjamin.drung-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
To: Jason Gunthorpe
<jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>,
Bart Van Assche <Bart.VanAssche-Sjgp3cTcYWE@public.gmane.org>
Cc: "linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH] Add rdma service for kernel boot support
Date: Fri, 14 Jul 2017 12:18:11 +0200 [thread overview]
Message-ID: <1500027491.3563.29.camel@profitbricks.com> (raw)
In-Reply-To: <1500026921.3563.27.camel-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
Am Freitag, den 14.07.2017, 12:08 +0200 schrieb Benjamin Drung:
> Hi Jason,
>
> Am Donnerstag, den 13.07.2017, 16:15 -0600 schrieb Jason Gunthorpe:
> > On Thu, Jul 13, 2017 at 06:33:07PM +0000, Bart Van Assche wrote:
> > > On Thu, 2017-07-13 at 12:20 -0600, Jason Gunthorpe wrote:
> > > > Here is an untested attempt to move module loading into
> > > > srp_daemon -
> > > > what do you think Bart?
> > >
> > > Hello Jason,
> > >
> > > Thanks for the patch. To me this looks like a nice simplification
> > > compared
> > > to the current approach. Do you want me to test this patch?
> >
> > I did some more steps..
> >
> > Benjamin/Bart let me know what you think, I'll send the patches to
> > the
> > list if you like the idea.
> >
> > https://github.com/jgunthorpe/rdma-plumbing/tree/systemd
> >
> > This replaces Benjamins rdma.conf based approach.
> >
> > The basic approach is to directly use systemd to load the modules
> > and
> > determine what modules to load by using udev and explicit Requires
> > in
> > the units.
>
> I like your approach very much. It's cleaner and simpler. So let's
> ditch my approach and use yours.
>
> I tested your branch on a Debian 8 (jessie) system with a mlx4 card
> and
> found several points to fix/improve/discuss:
>
> 1. The rdma-load-modules@ service needs to set
> DefaultDependencies=no.
> Otherwise it will end up in a dependency loop:
>
> Found ordering cycle on rdma-load-modules-A9MMwDI1uB1TDjBF/Jpztg@public.gmane.org/start
> Found dependency on basic.target/start
> Found dependency on paths.target/start
> Found dependency on acpid.path/start
> Found dependency on sysinit.target/start
> Found dependency on rdma-load-modules-A9MMwDI1uB1TDjBF/Jpztg@public.gmane.org/start
> Breaking ordering cycle by deleting job paths.target/start
> Found ordering cycle on rdma-load-modules-A9MMwDI1uB1TDjBF/Jpztg@public.gmane.org/start
> Found dependency on paths.target/start
> Found dependency on acpid.path/start
> Found dependency on sysinit.target/start
> Found dependency on rdma-load-modules-A9MMwDI1uB1TDjBF/Jpztg@public.gmane.org/start
> Starting Load RDMA modules from /etc/rdma/modules/mlx4.conf...
>
> 2. You can just specify "etc/rdma/modules" in debian/rdma-
> core.install
> instead of listing each .conf file individually.
>
> 3. Default conf files for opa.conf and roce.conf are missing.
>
> 4. Should rdma-load-modules@ *not* fail if the corresponding .conf is
> missing?
>
> 5. How to handle build-in modules correctly? Our kernel has the i40e
> module built in (CONFIG_I40E=y) and rdma-load-modules-QqjR1VyAyFhTDjBF/Jpztg@public.gmane.org
> will
> be started, but the system does not have a i40e card and thus I don't
> want to have the module started.
Forgot one point:
6. The ipoib module (loaded by rdma-load-modules@infiniband) needs to
loaded before the networking.service is running. The networking.service
brings up the network devices on Debian. It runs "ifup -a" which reads
/etc/network/interfaces which we use to configure our ipoib devices.
Here is the networking.service definition:
bdrung@server:~$ systemctl cat networking.service
# /run/systemd/generator.late/networking.service
# Automatically generated by systemd-sysv-generator
[Unit]
SourcePath=/etc/init.d/networking
Description=LSB: Raise network interfaces.
DefaultDependencies=no
Before=sysinit.target shutdown.target
After=mountkernfs.service local-fs.target urandom.service
Conflicts=shutdown.target
[Service]
Type=forking
Restart=no
TimeoutSec=0
IgnoreSIGPIPE=no
KillMode=process
GuessMainPID=no
RemainAfterExit=yes
SysVStartPriority=13
ExecStart=/etc/init.d/networking start
ExecStop=/etc/init.d/networking stop
ExecReload=/etc/init.d/networking reload
# /run/systemd/generator/networking.service.d/50-insserv.conf-$network.conf
# Automatically generated by systemd-insserv-generator
[Unit]
Wants=network.target
Before=network.target
# /lib/systemd/system/networking.service.d/network-pre.conf
[Unit]
After=network-pre.target systemd-sysctl.service systemd-modules-load.service
--
Benjamin Drung
System Developer
Debian & Ubuntu Developer
ProfitBricks GmbH
Greifswalder Str. 207
D - 10405 Berlin
Email: benjamin.drung-EIkl63zCoXaH+58JC4qpiA@public.gmane.org
Web: https://www.profitbricks.com
Sitz der Gesellschaft: Berlin.
Registergericht: Amtsgericht Charlottenburg, HRB 125506B.
Geschäftsführer: Achim Weiss.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-07-14 10:18 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-13 17:20 [PATCH] Add rdma service for kernel boot support Benjamin Drung
[not found] ` <20170713172057.25411-1-benjamin.drung-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
2017-07-13 17:48 ` Bart Van Assche
[not found] ` <1499968101.2740.10.camel-Sjgp3cTcYWE@public.gmane.org>
2017-07-13 18:20 ` Jason Gunthorpe
[not found] ` <20170713182018.GE11069-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2017-07-13 18:33 ` Bart Van Assche
[not found] ` <1499970786.2740.17.camel-Sjgp3cTcYWE@public.gmane.org>
2017-07-13 22:15 ` Jason Gunthorpe
[not found] ` <20170713221520.GA10088-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2017-07-13 22:36 ` Bart Van Assche
[not found] ` <1499985409.2740.24.camel-Sjgp3cTcYWE@public.gmane.org>
2017-07-13 22:41 ` Jason Gunthorpe
[not found] ` <20170713224137.GA24689-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2017-07-13 22:45 ` Bart Van Assche
[not found] ` <1499985913.2740.26.camel-Sjgp3cTcYWE@public.gmane.org>
2017-07-13 22:51 ` Jason Gunthorpe
2017-07-14 10:08 ` Benjamin Drung
[not found] ` <1500026921.3563.27.camel-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
2017-07-14 10:18 ` Benjamin Drung [this message]
2017-07-14 15:55 ` Jason Gunthorpe
[not found] ` <20170714155544.GA25760-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2017-07-14 16:23 ` Benjamin Drung
[not found] ` <1500049393.3563.42.camel-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
2017-07-14 16:40 ` Jason Gunthorpe
[not found] ` <20170714164029.GA9942-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2017-07-20 9:04 ` Benjamin Drung
[not found] ` <1500541450.4226.5.camel-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
2017-07-21 2:45 ` Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500027491.3563.29.camel@profitbricks.com \
--to=benjamin.drung-eikl63zcoxah+58jc4qpia@public.gmane.org \
--cc=Bart.VanAssche-Sjgp3cTcYWE@public.gmane.org \
--cc=jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.