From: Kiran Gunda <kgunda@codeaurora.org>
To: gregkh@linuxfoundation.org, sboyd@codeaurora.org,
Kiran Gunda <kgunda@codeaurora.org>,
Abhijeet Dharmapurikar <adharmap@codeaurora.org>,
David Collins <collinsd@codeaurora.org>,
linux-kernel@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Subject: [PATCH V4 3/4] spmi: pmic-arb: add support for HW version 5
Date: Tue, 18 Jul 2017 15:51:04 +0530 [thread overview]
Message-ID: <1500373265-12875-4-git-send-email-kgunda@codeaurora.org> (raw)
In-Reply-To: <1500373265-12875-1-git-send-email-kgunda@codeaurora.org>
From: David Collins <collinsd@codeaurora.org>
Add support for version 5 of the SPMI PMIC arbiter. It utilizes
different offsets for registers than those found on version 3.
Also, the procedure to determine if writing and IRQ access is
allowed for a given PPID changes for version 5.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
drivers/spmi/spmi-pmic-arb.c | 236 +++++++++++++++++++++++++++++++++++++++----
1 file changed, 214 insertions(+), 22 deletions(-)
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 156f776..d51329e 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -29,6 +29,7 @@
#define PMIC_ARB_VERSION 0x0000
#define PMIC_ARB_VERSION_V2_MIN 0x20010000
#define PMIC_ARB_VERSION_V3_MIN 0x30000000
+#define PMIC_ARB_VERSION_V5_MIN 0x50000000
#define PMIC_ARB_INT_EN 0x0004
/* PMIC Arbiter channel registers offsets */
@@ -39,7 +40,6 @@
#define PMIC_ARB_WDATA1 0x14
#define PMIC_ARB_RDATA0 0x18
#define PMIC_ARB_RDATA1 0x1C
-#define PMIC_ARB_REG_APID(N) (0x800 + 0x4 * (N))
/* Mapping Table */
#define SPMI_MAPPING_TABLE_REG(N) (0x0B00 + (4 * (N)))
@@ -52,6 +52,8 @@
#define SPMI_MAPPING_TABLE_TREE_DEPTH 16 /* Maximum of 16-bits */
#define PMIC_ARB_MAX_PPID BIT(12) /* PPID is 12bit */
#define PMIC_ARB_APID_VALID BIT(15)
+#define PMIC_ARB_CHAN_IS_IRQ_OWNER(reg) ((reg) & BIT(24))
+#define INVALID_EE 0xFF
/* Ownership Table */
#define SPMI_OWNERSHIP_TABLE_REG(N) (0x0700 + (4 * (N)))
@@ -86,6 +88,15 @@ enum pmic_arb_cmd_op_code {
PMIC_ARB_OP_ZERO_WRITE = 16,
};
+/*
+ * PMIC arbiter version 5 uses different register offsets for read/write vs
+ * observer channels.
+ */
+enum pmic_arb_channel {
+ PMIC_ARB_CHANNEL_RW,
+ PMIC_ARB_CHANNEL_OBS,
+};
+
/* Maximum number of support PMIC peripherals */
#define PMIC_ARB_MAX_PERIPHS 512
#define PMIC_ARB_TIMEOUT_US 100
@@ -112,7 +123,8 @@ enum pmic_arb_cmd_op_code {
struct apid_data {
u16 ppid;
- u8 owner;
+ u8 write_ee;
+ u8 irq_ee;
};
/**
@@ -175,12 +187,14 @@ struct spmi_pmic_arb {
* on v2 address of SPMI_PIC_IRQ_STATUSn.
* @irq_clear: on v1 address of PMIC_ARB_SPMI_PIC_IRQ_CLEARn
* on v2 address of SPMI_PIC_IRQ_CLEARn.
+ * @apid_map_offset: offset of PMIC_ARB_REG_CHNLn
*/
struct pmic_arb_ver_ops {
const char *ver_str;
int (*ppid_to_apid)(struct spmi_pmic_arb *pmic_arb, u16 ppid);
/* spmi commands (read_cmd, write_cmd, cmd) functionality */
- int (*offset)(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr);
+ int (*offset)(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
+ enum pmic_arb_channel ch_type);
u32 (*fmt_cmd)(u8 opc, u8 sid, u16 addr, u8 bc);
int (*non_data_cmd)(struct spmi_controller *ctrl, u8 opc, u8 sid);
/* Interrupts controller functionality (offset of PIC registers) */
@@ -189,6 +203,7 @@ struct pmic_arb_ver_ops {
void __iomem *(*acc_enable)(struct spmi_pmic_arb *pmic_arb, u16 n);
void __iomem *(*irq_status)(struct spmi_pmic_arb *pmic_arb, u16 n);
void __iomem *(*irq_clear)(struct spmi_pmic_arb *pmic_arb, u16 n);
+ u32 (*apid_map_offset)(u16 n);
};
static inline void pmic_arb_base_write(struct spmi_pmic_arb *pmic_arb,
@@ -233,7 +248,8 @@ static void pmic_arb_write_data(struct spmi_pmic_arb *pmic_arb, const u8 *buf,
}
static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
- void __iomem *base, u8 sid, u16 addr)
+ void __iomem *base, u8 sid, u16 addr,
+ enum pmic_arb_channel ch_type)
{
struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
u32 status = 0;
@@ -241,7 +257,7 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
u32 offset;
int rc;
- rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr);
+ rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr, ch_type);
if (rc < 0)
return rc;
@@ -289,7 +305,7 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
int rc;
u32 offset;
- rc = pmic_arb->ver_ops->offset(pmic_arb, sid, 0);
+ rc = pmic_arb->ver_ops->offset(pmic_arb, sid, 0, PMIC_ARB_CHANNEL_RW);
if (rc < 0)
return rc;
@@ -298,7 +314,8 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
raw_spin_lock_irqsave(&pmic_arb->lock, flags);
pmic_arb_base_write(pmic_arb, offset + PMIC_ARB_CMD, cmd);
- rc = pmic_arb_wait_for_done(ctrl, pmic_arb->wr_base, sid, 0);
+ rc = pmic_arb_wait_for_done(ctrl, pmic_arb->wr_base, sid, 0,
+ PMIC_ARB_CHANNEL_RW);
raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
return rc;
@@ -334,7 +351,8 @@ static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
int rc;
u32 offset;
- rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr);
+ rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr,
+ PMIC_ARB_CHANNEL_OBS);
if (rc < 0)
return rc;
@@ -359,7 +377,8 @@ static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
raw_spin_lock_irqsave(&pmic_arb->lock, flags);
pmic_arb_set_rd_cmd(pmic_arb, offset + PMIC_ARB_CMD, cmd);
- rc = pmic_arb_wait_for_done(ctrl, pmic_arb->rd_base, sid, addr);
+ rc = pmic_arb_wait_for_done(ctrl, pmic_arb->rd_base, sid, addr,
+ PMIC_ARB_CHANNEL_OBS);
if (rc)
goto done;
@@ -376,7 +395,7 @@ static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
}
static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
- u16 addr, const u8 *buf, size_t len)
+ u16 addr, const u8 *buf, size_t len)
{
struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
unsigned long flags;
@@ -385,7 +404,8 @@ static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
int rc;
u32 offset;
- rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr);
+ rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr,
+ PMIC_ARB_CHANNEL_RW);
if (rc < 0)
return rc;
@@ -420,7 +440,8 @@ static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
/* Start the transaction */
pmic_arb_base_write(pmic_arb, offset + PMIC_ARB_CMD, cmd);
- rc = pmic_arb_wait_for_done(ctrl, pmic_arb->wr_base, sid, addr);
+ rc = pmic_arb_wait_for_done(ctrl, pmic_arb->wr_base, sid, addr,
+ PMIC_ARB_CHANNEL_RW);
raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
return rc;
@@ -681,12 +702,19 @@ static int qpnpint_irq_domain_dt_translate(struct irq_domain *d,
ppid = intspec[0] << 8 | intspec[1];
rc = pmic_arb->ver_ops->ppid_to_apid(pmic_arb, ppid);
if (rc < 0) {
- dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = 0x%x, periph = 0x%x, irq = %x rc = %d\n",
+ dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u rc = %d\n",
intspec[0], intspec[1], intspec[2], rc);
return rc;
}
apid = rc;
+ if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
+ dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
+ intspec[0], intspec[1], intspec[2], pmic_arb->ee,
+ pmic_arb->apid_data[apid].irq_ee);
+ return -ENODEV;
+ }
+
/* Keep track of {max,min}_apid for bounding search during interrupt */
if (apid > pmic_arb->max_apid)
pmic_arb->max_apid = apid;
@@ -763,7 +791,8 @@ static int pmic_arb_ppid_to_apid_v1(struct spmi_pmic_arb *pmic_arb, u16 ppid)
}
/* v1 offset per ee */
-static int pmic_arb_offset_v1(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr)
+static int pmic_arb_offset_v1(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
+ enum pmic_arb_channel ch_type)
{
return 0x800 + 0x80 * pmic_arb->channel;
}
@@ -774,18 +803,15 @@ static u16 pmic_arb_find_apid(struct spmi_pmic_arb *pmic_arb, u16 ppid)
u32 regval, offset;
u16 id, apid;
- /*
- * PMIC_ARB_REG_APID is a table in HW mapping apid to ppid.
- * ppid_to_apid is an in-memory invert of that table.
- */
for (apid = pmic_arb->last_apid; ; apid++, apidd++) {
- offset = PMIC_ARB_REG_APID(apid);
+ offset = pmic_arb->ver_ops->apid_map_offset(apid);
if (offset >= pmic_arb->core_size)
break;
regval = readl_relaxed(pmic_arb->cnfg +
SPMI_OWNERSHIP_TABLE_REG(apid));
- apidd->owner = SPMI_OWNERSHIP_PERIPH2OWNER(regval);
+ apidd->irq_ee = SPMI_OWNERSHIP_PERIPH2OWNER(regval);
+ apidd->write_ee = apidd->irq_ee;
regval = readl_relaxed(pmic_arb->core + offset);
if (!regval)
@@ -817,8 +843,84 @@ static int pmic_arb_ppid_to_apid_v2(struct spmi_pmic_arb *pmic_arb, u16 ppid)
return apid_valid & ~PMIC_ARB_APID_VALID;
}
+static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
+{
+ struct apid_data *apidd = pmic_arb->apid_data;
+ struct apid_data *prev_apidd;
+ u16 i, apid, ppid;
+ bool valid, is_irq_ee;
+ u32 regval, offset;
+
+ /*
+ * In order to allow multiple EEs to write to a single PPID in arbiter
+ * version 5, there is more than one APID mapped to each PPID.
+ * The owner field for each of these mappings specifies the EE which is
+ * allowed to write to the APID. The owner of the last (highest) APID
+ * for a given PPID will receive interrupts from the PPID.
+ */
+ for (i = 0; ; i++, apidd++) {
+ offset = pmic_arb->ver_ops->apid_map_offset(i);
+ if (offset >= pmic_arb->core_size)
+ break;
+
+ regval = readl_relaxed(pmic_arb->core + offset);
+ if (!regval)
+ continue;
+ ppid = (regval >> 8) & PMIC_ARB_PPID_MASK;
+ is_irq_ee = PMIC_ARB_CHAN_IS_IRQ_OWNER(regval);
+
+ regval = readl_relaxed(pmic_arb->cnfg +
+ SPMI_OWNERSHIP_TABLE_REG(i));
+ apidd->write_ee = SPMI_OWNERSHIP_PERIPH2OWNER(regval);
+
+ apidd->irq_ee = is_irq_ee ? apidd->write_ee : INVALID_EE;
+
+ valid = pmic_arb->ppid_to_apid[ppid] & PMIC_ARB_APID_VALID;
+ apid = pmic_arb->ppid_to_apid[ppid] & ~PMIC_ARB_APID_VALID;
+ prev_apidd = &pmic_arb->apid_data[apid];
+
+ if (valid && is_irq_ee &&
+ prev_apidd->write_ee == pmic_arb->ee) {
+ /*
+ * Duplicate PPID mapping after the one for this EE;
+ * override the irq owner
+ */
+ prev_apidd->irq_ee = apidd->irq_ee;
+ } else if (!valid || is_irq_ee) {
+ /* First PPID mapping or duplicate for another EE */
+ pmic_arb->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID;
+ }
+
+ apidd->ppid = ppid;
+ pmic_arb->last_apid = i;
+ }
+
+ /* Dump the mapping table for debug purposes. */
+ dev_dbg(&pmic_arb->spmic->dev, "PPID APID Write-EE IRQ-EE\n");
+ for (ppid = 0; ppid < PMIC_ARB_MAX_PPID; ppid++) {
+ apid = pmic_arb->ppid_to_apid[ppid];
+ if (apid & PMIC_ARB_APID_VALID) {
+ apid &= ~PMIC_ARB_APID_VALID;
+ apidd = &pmic_arb->apid_data[apid];
+ dev_dbg(&pmic_arb->spmic->dev, "%#03X %3u %2u %2u\n",
+ ppid, apid, apidd->write_ee, apidd->irq_ee);
+ }
+ }
+
+ return 0;
+}
+
+static int pmic_arb_ppid_to_apid_v5(struct spmi_pmic_arb *pmic_arb, u16 ppid)
+{
+ if (!(pmic_arb->ppid_to_apid[ppid] & PMIC_ARB_APID_VALID))
+ return -ENODEV;
+
+ return pmic_arb->ppid_to_apid[ppid] & ~PMIC_ARB_APID_VALID;
+}
+
/* v2 offset per ppid and per ee */
-static int pmic_arb_offset_v2(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr)
+static int pmic_arb_offset_v2(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
+ enum pmic_arb_channel ch_type)
{
u16 apid;
u16 ppid;
@@ -833,6 +935,35 @@ static int pmic_arb_offset_v2(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr)
return 0x1000 * pmic_arb->ee + 0x8000 * apid;
}
+/*
+ * v5 offset per ee and per apid for observer channels and per apid for
+ * read/write channels.
+ */
+static int pmic_arb_offset_v5(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
+ enum pmic_arb_channel ch_type)
+{
+ u16 apid;
+ int rc;
+ u32 offset = 0;
+ u16 ppid = (sid << 8) | (addr >> 8);
+
+ rc = pmic_arb_ppid_to_apid_v5(pmic_arb, ppid);
+ if (rc < 0)
+ return rc;
+
+ apid = rc;
+ switch (ch_type) {
+ case PMIC_ARB_CHANNEL_OBS:
+ offset = 0x10000 * pmic_arb->ee + 0x80 * apid;
+ break;
+ case PMIC_ARB_CHANNEL_RW:
+ offset = 0x10000 * apid;
+ break;
+ }
+
+ return offset;
+}
+
static u32 pmic_arb_fmt_cmd_v1(u8 opc, u8 sid, u16 addr, u8 bc)
{
return (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7);
@@ -862,6 +993,12 @@ static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 sid, u16 addr, u8 bc)
}
static void __iomem *
+pmic_arb_owner_acc_status_v5(struct spmi_pmic_arb *pmic_arb, u8 m, u16 n)
+{
+ return pmic_arb->intr + 0x10000 * m + 0x4 * n;
+}
+
+static void __iomem *
pmic_arb_acc_enable_v1(struct spmi_pmic_arb *pmic_arb, u16 n)
{
return pmic_arb->intr + 0x200 + 0x4 * n;
@@ -874,6 +1011,12 @@ static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 sid, u16 addr, u8 bc)
}
static void __iomem *
+pmic_arb_acc_enable_v5(struct spmi_pmic_arb *pmic_arb, u16 n)
+{
+ return pmic_arb->wr_base + 0x100 + 0x10000 * n;
+}
+
+static void __iomem *
pmic_arb_irq_status_v1(struct spmi_pmic_arb *pmic_arb, u16 n)
{
return pmic_arb->intr + 0x600 + 0x4 * n;
@@ -886,6 +1029,12 @@ static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 sid, u16 addr, u8 bc)
}
static void __iomem *
+pmic_arb_irq_status_v5(struct spmi_pmic_arb *pmic_arb, u16 n)
+{
+ return pmic_arb->wr_base + 0x104 + 0x10000 * n;
+}
+
+static void __iomem *
pmic_arb_irq_clear_v1(struct spmi_pmic_arb *pmic_arb, u16 n)
{
return pmic_arb->intr + 0xA00 + 0x4 * n;
@@ -897,6 +1046,22 @@ static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 sid, u16 addr, u8 bc)
return pmic_arb->intr + 0x8 + 0x1000 * n;
}
+static void __iomem *
+pmic_arb_irq_clear_v5(struct spmi_pmic_arb *pmic_arb, u16 n)
+{
+ return pmic_arb->wr_base + 0x108 + 0x10000 * n;
+}
+
+static u32 pmic_arb_apid_map_offset_v2(u16 n)
+{
+ return 0x800 + 0x4 * n;
+}
+
+static u32 pmic_arb_apid_map_offset_v5(u16 n)
+{
+ return 0x900 + 0x4 * n;
+}
+
static const struct pmic_arb_ver_ops pmic_arb_v1 = {
.ver_str = "v1",
.ppid_to_apid = pmic_arb_ppid_to_apid_v1,
@@ -907,6 +1072,7 @@ static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 sid, u16 addr, u8 bc)
.acc_enable = pmic_arb_acc_enable_v1,
.irq_status = pmic_arb_irq_status_v1,
.irq_clear = pmic_arb_irq_clear_v1,
+ .apid_map_offset = pmic_arb_apid_map_offset_v2,
};
static const struct pmic_arb_ver_ops pmic_arb_v2 = {
@@ -919,6 +1085,7 @@ static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 sid, u16 addr, u8 bc)
.acc_enable = pmic_arb_acc_enable_v2,
.irq_status = pmic_arb_irq_status_v2,
.irq_clear = pmic_arb_irq_clear_v2,
+ .apid_map_offset = pmic_arb_apid_map_offset_v2,
};
static const struct pmic_arb_ver_ops pmic_arb_v3 = {
@@ -931,6 +1098,20 @@ static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 sid, u16 addr, u8 bc)
.acc_enable = pmic_arb_acc_enable_v2,
.irq_status = pmic_arb_irq_status_v2,
.irq_clear = pmic_arb_irq_clear_v2,
+ .apid_map_offset = pmic_arb_apid_map_offset_v2,
+};
+
+static const struct pmic_arb_ver_ops pmic_arb_v5 = {
+ .ver_str = "v5",
+ .ppid_to_apid = pmic_arb_ppid_to_apid_v5,
+ .non_data_cmd = pmic_arb_non_data_cmd_v2,
+ .offset = pmic_arb_offset_v5,
+ .fmt_cmd = pmic_arb_fmt_cmd_v2,
+ .owner_acc_status = pmic_arb_owner_acc_status_v5,
+ .acc_enable = pmic_arb_acc_enable_v5,
+ .irq_status = pmic_arb_irq_status_v5,
+ .irq_clear = pmic_arb_irq_clear_v5,
+ .apid_map_offset = pmic_arb_apid_map_offset_v5,
};
static const struct irq_domain_ops pmic_arb_irq_domain_ops = {
@@ -983,8 +1164,10 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
if (hw_ver < PMIC_ARB_VERSION_V3_MIN)
pmic_arb->ver_ops = &pmic_arb_v2;
- else
+ else if (hw_ver < PMIC_ARB_VERSION_V5_MIN)
pmic_arb->ver_ops = &pmic_arb_v3;
+ else
+ pmic_arb->ver_ops = &pmic_arb_v5;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"obsrvr");
@@ -1074,6 +1257,15 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
ctrl->read_cmd = pmic_arb_read_cmd;
ctrl->write_cmd = pmic_arb_write_cmd;
+ if (hw_ver >= PMIC_ARB_VERSION_V5_MIN) {
+ err = pmic_arb_read_apid_map_v5(pmic_arb);
+ if (err) {
+ dev_err(&pdev->dev, "could not read APID->PPID mapping table, rc= %d\n",
+ err);
+ goto err_put_ctrl;
+ }
+ }
+
dev_dbg(&pdev->dev, "adding irq domain\n");
pmic_arb->domain = irq_domain_add_tree(pdev->dev.of_node,
&pmic_arb_irq_domain_ops, pmic_arb);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2017-07-18 10:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-18 10:21 [PATCH V4 0/4]: spmi: pmic-arb: support for V5 HW and bug fixes Kiran Gunda
2017-07-18 10:21 ` [PATCH V4 1/4] spmi: pmic-arb: return __iomem pointer instead of offset Kiran Gunda
2017-07-18 10:21 ` [PATCH V4 2/4] spmi: pmic-arb: fix a possible null pointer dereference Kiran Gunda
2017-07-18 10:21 ` Kiran Gunda [this message]
2017-07-18 22:47 ` [PATCH V4 3/4] spmi: pmic-arb: add support for HW version 5 Stephen Boyd
2017-07-18 10:21 ` [PATCH V4 4/4] spmi: pmic-arb: Remove checking opc value not less than 0 Kiran Gunda
2017-07-18 22:17 ` [PATCH V4 0/4]: spmi: pmic-arb: support for V5 HW and bug fixes Stephen Boyd
2017-07-20 6:50 ` kgunda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500373265-12875-4-git-send-email-kgunda@codeaurora.org \
--to=kgunda@codeaurora.org \
--cc=adharmap@codeaurora.org \
--cc=collinsd@codeaurora.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.