From: Lyude Paul <lyude@redhat.com>
To: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH i-g-t v3] tests/chamelium: Detect analog bridges and handle EDID accordingly
Date: Fri, 21 Jul 2017 14:33:41 -0400 [thread overview]
Message-ID: <1500662021.25077.1.camel@redhat.com> (raw)
In-Reply-To: <1500625193.1379.3.camel@linux.intel.com>
On Fri, 2017-07-21 at 11:19 +0300, Paul Kocialkowski wrote:
> On Wed, 2017-07-19 at 16:50 +0300, Paul Kocialkowski wrote:
> > Nowadays, many VGA connectors are not actually native VGA but use a
> > discrete bridge to a digital connector. These bridges usually
> > enforce
> > their own EDID instead of the one supplied by the chamelium.
> >
> > Thus, the EDID read test for VGA is not relevant in that case and
> > should be skipped. Reported modes may also go beyond what the
> > chamelium
> > can support. Thus, only supported resolutions should be tested for
> > the
> > frame dump test and others should be pruned.
>
> This should be ready for merge now that all its dependencies have
> been
> merged!
>
Whoops! Thought I had added it but I guess I didn't, I've r-b'd it and
pushed it upstream
> Cheers,
>
> Paul
>
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@linux.intel.com
> > >
> > ---
> > tests/chamelium.c | 78
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 78 insertions(+)
> >
> > diff --git a/tests/chamelium.c b/tests/chamelium.c
> > index 33ecc2e7..881b7fa9 100644
> > --- a/tests/chamelium.c
> > +++ b/tests/chamelium.c
> > @@ -130,6 +130,76 @@ wait_for_connector(data_t *data, struct
> > chamelium_port *port,
> > igt_assert(finished);
> > }
> >
> > +static int chamelium_vga_modes[][2] = {
> > + { 1600, 1200 },
> > + { 1920, 1200 },
> > + { 1920, 1080 },
> > + { 1680, 1050 },
> > + { 1280, 1024 },
> > + { 1280, 960 },
> > + { 1440, 900 },
> > + { 1280, 800 },
> > + { 1024, 768 },
> > + { 1360, 768 },
> > + { 1280, 720 },
> > + { 800, 600 },
> > + { 640, 480 },
> > + { -1, -1 },
> > +};
> > +
> > +static bool
> > +prune_vga_mode(data_t *data, drmModeModeInfo *mode)
> > +{
> > + int i = 0;
> > +
> > + while (chamelium_vga_modes[i][0] != -1) {
> > + if (mode->hdisplay == chamelium_vga_modes[i][0] &&
> > + mode->vdisplay == chamelium_vga_modes[i][1])
> > + return false;
> > +
> > + i++;
> > + }
> > +
> > + return true;
> > +}
> > +
> > +static bool
> > +check_analog_bridge(data_t *data, struct chamelium_port *port)
> > +{
> > + drmModePropertyBlobPtr edid_blob = NULL;
> > + drmModeConnector *connector =
> > chamelium_port_get_connector(
> > + data->chamelium, port, false);
> > + uint64_t edid_blob_id;
> > + unsigned char *edid;
> > + char edid_vendor[3];
> > +
> > + if (chamelium_port_get_type(port) !=
> > DRM_MODE_CONNECTOR_VGA)
> > + return false;
> > +
> > + igt_assert(kmstest_get_property(data->drm_fd, connector-
> > > connector_id,
> >
> > + DRM_MODE_OBJECT_CONNECTOR,
> > "EDID", NULL,
> > + &edid_blob_id, NULL));
> > + igt_assert(edid_blob = drmModeGetPropertyBlob(data-
> > >drm_fd,
> > + edid_blob_id
> > ));
> > +
> > + edid = (unsigned char *) edid_blob->data;
> > +
> > + edid_vendor[0] = ((edid[8] & 0x7c) >> 2) + '@';
> > + edid_vendor[1] = (((edid[8] & 0x03) << 3) |
> > + ((edid[9] & 0xe0) >> 5)) + '@';
> > + edid_vendor[2] = (edid[9] & 0x1f) + '@';
> > +
> > + /* Analog bridges provide their own EDID */
> > + if (edid_vendor[0] != 'I' || edid_vendor[1] != 'G' ||
> > + edid_vendor[0] != 'T')
> > + return true;
> > +
> > + drmModeFreePropertyBlob(edid_blob);
> > + drmModeFreeConnector(connector);
> > +
> > + return false;
> > +}
> > +
> > static void
> > reset_state(data_t *data, struct chamelium_port *port)
> > {
> > @@ -193,6 +263,8 @@ test_edid_read(data_t *data, struct
> > chamelium_port
> > *port,
> > chamelium_plug(data->chamelium, port);
> > wait_for_connector(data, port, DRM_MODE_CONNECTED);
> >
> > + igt_skip_on(check_analog_bridge(data, port));
> > +
> > igt_assert(kmstest_get_property(data->drm_fd, connector-
> > > connector_id,
> >
> > DRM_MODE_OBJECT_CONNECTOR,
> > "EDID", NULL,
> > &edid_blob_id, NULL));
> > @@ -547,15 +619,21 @@ test_analog_frame_dump(data_t *data, struct
> > chamelium_port *port)
> > drmModeModeInfo *mode;
> > drmModeConnector *connector;
> > int fb_id, i;
> > + bool bridge;
> >
> > output = prepare_output(data, &display, port);
> > connector = chamelium_port_get_connector(data->chamelium,
> > port, false);
> > primary = igt_output_get_plane_type(output,
> > DRM_PLANE_TYPE_PRIMARY);
> > igt_assert(primary);
> >
> > + bridge = check_analog_bridge(data, port);
> > +
> > for (i = 0; i < connector->count_modes; i++) {
> > mode = &connector->modes[i];
> >
> > + if (bridge && prune_vga_mode(data, mode))
> > + continue;
> > +
> > fb_id = igt_create_color_pattern_fb(data->drm_fd,
> > mode-
> > >hdisplay,
> > mode->vdisplay,
> > DRM_FORMAT_XRG
> > B88
> > 88,
--
Cheers,
Lyude
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2017-07-21 18:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-06 13:27 [PATCH i-g-t 0/1] tests/chamelium: Detect analogue bridges and handle EDID accordingly Paul Kocialkowski
2017-07-06 13:27 ` [PATCH i-g-t] " Paul Kocialkowski
2017-07-12 15:00 ` [PATCH i-g-t v2 0/1] " Paul Kocialkowski
2017-07-12 15:00 ` [PATCH i-g-t v2] " Paul Kocialkowski
2017-07-19 13:50 ` [PATCH i-g-t v3 0/1] " Paul Kocialkowski
2017-07-19 13:50 ` [PATCH i-g-t v3] tests/chamelium: Detect analog " Paul Kocialkowski
2017-07-21 8:19 ` Paul Kocialkowski
2017-07-21 18:33 ` Lyude Paul [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500662021.25077.1.camel@redhat.com \
--to=lyude@redhat.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paul.kocialkowski@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.