All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Lieven <pl@kamp.de>
To: qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org, kwolf@redhat.com, lersek@redhat.com,
	den@openvz.org, mreitz@redhat.com, eblake@redhat.com,
	berrange@redhat.com, Peter Lieven <pl@kamp.de>
Subject: [Qemu-devel] [PATCH V5 08/10] block/qcow2: start using the compress format extension
Date: Tue, 25 Jul 2017 16:41:37 +0200	[thread overview]
Message-ID: <1500993699-19299-9-git-send-email-pl@kamp.de> (raw)
In-Reply-To: <1500993699-19299-1-git-send-email-pl@kamp.de>

we now pass the parameters to the zlib compressor if the
extension is present and use the old default values if
the extension is absent.

Signed-off-by: Peter Lieven <pl@kamp.de>
---
 block/qcow2-cluster.c | 58 ++++++++++++++++++++++++++++++---------------------
 block/qcow2.c         | 53 +++++++++++++++++++++++-----------------------
 2 files changed, 61 insertions(+), 50 deletions(-)

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index f06c08f..345feec 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1479,30 +1479,39 @@ again:
 }
 
 static int decompress_buffer(uint8_t *out_buf, int out_buf_size,
-                             const uint8_t *buf, int buf_size)
+                             const uint8_t *buf, int buf_size,
+                             Qcow2Compress *compress)
 {
-    z_stream strm1, *strm = &strm1;
-    int ret, out_len;
-
-    memset(strm, 0, sizeof(*strm));
-
-    strm->next_in = (uint8_t *)buf;
-    strm->avail_in = buf_size;
-    strm->next_out = out_buf;
-    strm->avail_out = out_buf_size;
-
-    ret = inflateInit2(strm, -12);
-    if (ret != Z_OK)
-        return -1;
-    ret = inflate(strm, Z_FINISH);
-    out_len = strm->next_out - out_buf;
-    if ((ret != Z_STREAM_END && ret != Z_BUF_ERROR) ||
-        out_len != out_buf_size) {
-        inflateEnd(strm);
-        return -1;
-    }
-    inflateEnd(strm);
-    return 0;
+    int ret = 0, out_len;
+
+    switch (compress->format) {
+    case QCOW2_COMPRESS_FORMAT_DEFLATE:
+    {
+        z_stream z_strm = {};
+
+        z_strm.next_in = (uint8_t *)buf;
+        z_strm.avail_in = buf_size;
+        z_strm.next_out = out_buf;
+        z_strm.avail_out = out_buf_size;
+
+        ret = inflateInit2(&z_strm, -compress->u.deflate.window_size);
+        if (ret != Z_OK) {
+            return -1;
+        }
+        ret = inflate(&z_strm, Z_FINISH);
+        out_len = z_strm.next_out - out_buf;
+        ret = -(ret != Z_STREAM_END);
+        inflateEnd(&z_strm);
+        break;
+    }
+    default:
+        abort(); /* should never reach this point */
+    }
+
+    if (out_len != out_buf_size) {
+        ret = -1;
+    }
+    return ret;
 }
 
 int qcow2_decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset)
@@ -1523,7 +1532,8 @@ int qcow2_decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset)
             return ret;
         }
         if (decompress_buffer(s->cluster_cache, s->cluster_size,
-                              s->cluster_data + sector_offset, csize) < 0) {
+                              s->cluster_data + sector_offset, csize,
+                              &s->compress) < 0) {
             return -EIO;
         }
         s->cluster_cache_offset = coffset;
diff --git a/block/qcow2.c b/block/qcow2.c
index a12b3d7..6031963 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -3426,9 +3426,9 @@ qcow2_co_pwritev_compressed(BlockDriverState *bs, uint64_t offset,
     BDRVQcow2State *s = bs->opaque;
     QEMUIOVector hd_qiov;
     struct iovec iov;
-    z_stream strm;
-    int ret, out_len;
-    uint8_t *buf, *out_buf, *local_buf = NULL;
+    z_stream z_strm = {};
+    int ret, out_len = 0;
+    uint8_t *buf, *out_buf = NULL, *local_buf = NULL;
     uint64_t cluster_offset;
 
     if (bytes == 0) {
@@ -3453,34 +3453,35 @@ qcow2_co_pwritev_compressed(BlockDriverState *bs, uint64_t offset,
         buf = qiov->iov[0].iov_base;
     }
 
-    out_buf = g_malloc(s->cluster_size);
+    switch (s->compress.format) {
+    case QCOW2_COMPRESS_FORMAT_DEFLATE:
+        out_buf = g_malloc(s->cluster_size);
+        ret = deflateInit2(
+            &z_strm, s->compress.u.deflate.level ?
+                     Z_DEFAULT_COMPRESSION : s->compress.u.deflate.level,
+                     Z_DEFLATED, -s->compress.u.deflate.window_size,
+                     9, Z_DEFAULT_STRATEGY);
+        if (ret != Z_OK) {
+            ret = -EINVAL;
+            goto fail;
+        }
 
-    /* best compression, small window, no zlib header */
-    memset(&strm, 0, sizeof(strm));
-    ret = deflateInit2(&strm, Z_DEFAULT_COMPRESSION,
-                       Z_DEFLATED, -12,
-                       9, Z_DEFAULT_STRATEGY);
-    if (ret != 0) {
-        ret = -EINVAL;
-        goto fail;
-    }
+        z_strm.avail_in = s->cluster_size;
+        z_strm.next_in = (uint8_t *)buf;
+        z_strm.avail_out = s->cluster_size;
+        z_strm.next_out = out_buf;
 
-    strm.avail_in = s->cluster_size;
-    strm.next_in = (uint8_t *)buf;
-    strm.avail_out = s->cluster_size;
-    strm.next_out = out_buf;
+        ret = deflate(&z_strm, Z_FINISH);
+        out_len = z_strm.next_out - out_buf;
+        deflateEnd(&z_strm);
 
-    ret = deflate(&strm, Z_FINISH);
-    if (ret != Z_STREAM_END && ret != Z_OK) {
-        deflateEnd(&strm);
-        ret = -EINVAL;
-        goto fail;
+        ret = ret != Z_STREAM_END;
+        break;
+    default:
+        abort(); /* should never reach this point */
     }
-    out_len = strm.next_out - out_buf;
-
-    deflateEnd(&strm);
 
-    if (ret != Z_STREAM_END || out_len >= s->cluster_size) {
+    if (ret || out_len >= s->cluster_size) {
         /* could not compress: write normal cluster */
         ret = qcow2_co_pwritev(bs, offset, bytes, qiov, 0);
         if (ret < 0) {
-- 
1.9.1

  parent reply	other threads:[~2017-07-25 14:42 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-25 14:41 [Qemu-devel] [PATCH V5 00/10] add Qcow2 compress format extension Peter Lieven
2017-07-25 14:41 ` [Qemu-devel] [PATCH V5 01/10] specs/qcow2: add " Peter Lieven
2017-07-25 15:03   ` Eric Blake
2017-07-25 20:29     ` Peter Lieven
2017-07-25 21:01       ` Eric Blake
2017-09-11 14:22   ` Kevin Wolf
2017-09-18 10:09     ` Peter Lieven
2017-09-18 10:50       ` Kevin Wolf
2017-12-13 16:43         ` Peter Lieven
2017-07-25 14:41 ` [Qemu-devel] [PATCH V5 02/10] qapi/block-core: add Qcow2Compress parameters Peter Lieven
2017-07-25 21:21   ` Eric Blake
2017-07-25 14:41 ` [Qemu-devel] [PATCH V5 03/10] block/qcow2: parse compress create options Peter Lieven
2017-07-25 21:26   ` Eric Blake
2017-07-25 14:41 ` [Qemu-devel] [PATCH V5 04/10] qemu-img: add documentation for compress settings Peter Lieven
2017-07-25 21:34   ` Eric Blake
2017-07-25 14:41 ` [Qemu-devel] [PATCH V5 05/10] block/qcow2: read and write the compress format extension Peter Lieven
2017-07-25 14:41 ` [Qemu-devel] [PATCH V5 06/10] block/qcow2: simplify ret usage in qcow2_create Peter Lieven
2017-07-25 14:41 ` [Qemu-devel] [PATCH V5 07/10] block/qcow2: optimize qcow2_co_pwritev_compressed Peter Lieven
2017-07-25 14:41 ` Peter Lieven [this message]
2017-07-25 14:41 ` [Qemu-devel] [PATCH V5 09/10] block/qcow2: add lzo compress format Peter Lieven
2017-07-25 21:41   ` Eric Blake
2017-07-25 14:41 ` [Qemu-devel] [PATCH V5 10/10] block/qcow2: add compress info to image specific info Peter Lieven
2017-07-25 21:55   ` Eric Blake
2017-07-26  9:05     ` Peter Lieven
2017-08-03 18:59     ` Peter Lieven
2017-09-11 14:08     ` Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1500993699-19299-9-git-send-email-pl@kamp.de \
    --to=pl@kamp.de \
    --cc=berrange@redhat.com \
    --cc=den@openvz.org \
    --cc=eblake@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=lersek@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.