diff for duplicates of <1501097259.2401.33.camel@baylibre.com>

diff --git a/a/1.txt b/N1/1.txt
index aeb154b..2276791 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -15,7 +15,7 @@ On Sun, 2017-06-11 at 08:31 +0200, crow wrote:
 > > if it works better. If that solves your problem, we can look at
 > > merging the changes.
 > > 
-> > ????????Andrew
+> >         Andrew
 > 
 > Thank your for the suggestion, and thanks Martin to explaining me over
 > IRC what actually I should do.
@@ -36,14 +36,14 @@ On Sun, 2017-06-11 at 08:31 +0200, crow wrote:
 > # modinfo meson_gxl
 > filename:
 > /lib/modules/4.12.0-rc4-4-ARCH/kernel/drivers/net/phy/meson-gxl.ko.gz
-> license:????????GPL
-> author:?????????Neil Armstrong <narmstrong@baylibre.com>
-> author:?????????Baoqi wang
-> description:????Amlogic Meson GXL Internal PHY driver
-> alias:??????????mdio:0000000110000001010001000000????
+> license:        GPL
+> author:         Neil Armstrong <narmstrong@baylibre.com>
+> author:         Baoqi wang
+> description:    Amlogic Meson GXL Internal PHY driver
+> alias:          mdio:0000000110000001010001000000????
 > depends:
-> intree:?????????Y
-> vermagic:???????4.12.0-rc4-4-ARCH SMP mod_unload aarch64
+> intree:         Y
+> vermagic:       4.12.0-rc4-4-ARCH SMP mod_unload aarch64
 > #
 > # mii-tool -vvv eth0
 > Using SIOCGMIIPHY=0x8947
@@ -52,19 +52,19 @@ On Sun, 2017-06-11 at 08:31 +0200, crow wrote:
 Hum, 1000Mbps Half duplex looks duplex looks suspicious
 The PHY is supposed to be a 10/100, right ? or did I miss something ?
 
-> ? registers for MII PHY 8:
-> ????1000 782d 0181 4400 01e1 c1e1 000f 2001
-> ????ffff ffff ffff ffff ffff ffff ffff ffff
-> ????0040 0002 40e8 5400 1c1c 0000 0000 aaaa
-> ????fff0 ffff 0000 040a 1407 004a 0000 105a
-> ? product info: vendor 00:60:51, model 0 rev 0
-> ? basic mode:???autonegotiation enabled
-> ? basic status: autonegotiation complete, link ok
-> ? capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
+>   registers for MII PHY 8:
+>     1000 782d 0181 4400 01e1 c1e1 000f 2001
+>     ffff ffff ffff ffff ffff ffff ffff ffff
+>     0040 0002 40e8 5400 1c1c 0000 0000 aaaa
+>     fff0 ffff 0000 040a 1407 004a 0000 105a
+>   product info: vendor 00:60:51, model 0 rev 0
+>   basic mode:   autonegotiation enabled
+>   basic status: autonegotiation complete, link ok
+>   capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
 > 10baseT-FD 10baseT-HD
-> ? advertising:??1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
+>   advertising:  1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
 > 10baseT-FD 10baseT-HD
-> ? link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
+>   link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
 > 10baseT-FD 10baseT-HD
 > $
 > 
@@ -75,7 +75,7 @@ The PHY is supposed to be a 10/100, right ? or did I miss something ?
 > Cloning into 'linux-stable'...
 > remote: Counting objects: 5948690, done.
 > remote: Compressing objects: 100% (124799/124799), done.
-> Receiving objects:???0% (11668/5948690), 2.27 MiB | 4.52 MiB/s
+> Receiving objects:   0% (11668/5948690), 2.27 MiB | 4.52 MiB/s
 > 
 > shows timeout while trying to sync with NTP server:
 > 
@@ -89,19 +89,19 @@ The PHY is supposed to be a 10/100, right ? or did I miss something ?
 > # mii-tool -vvv eth0
 > Using SIOCGMIIPHY=0x8947
 > eth0: negotiated 1000baseT-HD flow-control, link ok
-> ? registers for MII PHY 8:
-> ????1000 782d 0181 4400 01e1 c1e1 000d 2001
-> ????ffff ffff ffff ffff ffff ffff ffff ffff
-> ????0040 0002 40e8 5400 1c1c 0000 0000 aaaa
-> ????fff0 ffff 0000 040a 1407 0000 0000 105a
-> ? product info: vendor 00:60:51, model 0 rev 0
-> ? basic mode:???autonegotiation enabled
-> ? basic status: autonegotiation complete, link ok
-> ? capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
+>   registers for MII PHY 8:
+>     1000 782d 0181 4400 01e1 c1e1 000d 2001
+>     ffff ffff ffff ffff ffff ffff ffff ffff
+>     0040 0002 40e8 5400 1c1c 0000 0000 aaaa
+>     fff0 ffff 0000 040a 1407 0000 0000 105a
+>   product info: vendor 00:60:51, model 0 rev 0
+>   basic mode:   autonegotiation enabled
+>   basic status: autonegotiation complete, link ok
+>   capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
 > 10baseT-FD 10baseT-HD
-> ? advertising:??1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
+>   advertising:  1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
 > 10baseT-FD 10baseT-HD
-> ? link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
+>   link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD
 > 10baseT-FD 10baseT-HD
 > #
 > 
@@ -116,7 +116,7 @@ The PHY is supposed to be a 10/100, right ? or did I miss something ?
 > [Sun Jun 11 07:40:34 2017] meson8b-dwmac c9410000.ethernet eth0: PTP
 > not supported by HW
 > [Sun Jun 11 07:40:36 2017] brcmfmac: brcmf_c_preinit_dcmds: Firmware
-> version = wl0: Mar??1 2015 07:29:38 version 7.45.18 (r538002) FWID
+> version = wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID
 > 01-6a2c8ad4
 > [Sun Jun 11 07:40:36 2017] meson8b-dwmac c9410000.ethernet eth0: Link
 > is Up - 100Mbps/Full - flow control off
@@ -152,5 +152,5 @@ The PHY is supposed to be a 10/100, right ? or did I miss something ?
 > 
 > _______________________________________________
 > linux-amlogic mailing list
-> linux-amlogic at lists.infradead.org
+> linux-amlogic@lists.infradead.org
 > http://lists.infradead.org/mailman/listinfo/linux-amlogic
diff --git a/a/content_digest b/N1/content_digest
index 2e579ac..0ac144d 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -2,10 +2,13 @@
  "ref\0CAG_g8w40V_u7JnX+EuNvCLmB2dAzuk_TgMkkKT9pn-SLBRi1pA@mail.gmail.com\0"
  "ref\020170610152741.GB26740@lunn.ch\0"
  "ref\0CAG_g8w7aaryfdGgRtbazGMGm5svebgNPNcKyWBfxaObMHs3x-Q@mail.gmail.com\0"
- "From\0jbrunet@baylibre.com (Jerome Brunet)\0"
- "Subject\0ARM GLX Khadas VIM Pro - Ethernet detected as only 10Mbps and stalled after some traffic\0"
+ "From\0Jerome Brunet <jbrunet@baylibre.com>\0"
+ "Subject\0Re: ARM GLX Khadas VIM Pro - Ethernet detected as only 10Mbps and stalled after some traffic\0"
  "Date\0Wed, 26 Jul 2017 21:27:39 +0200\0"
- "To\0linus-amlogic@lists.infradead.org\0"
+ "To\0crow <crow@linux.org.ba>"
+ " Andrew Lunn <andrew@lunn.ch>\0"
+ "Cc\0netdev@vger.kernel.org"
+ " linux-amlogic@lists.infradead.org\0"
  "\00:1\0"
  "b\0"
  "On Sun, 2017-06-11 at 08:31 +0200, crow wrote:\n"
@@ -25,7 +28,7 @@
  "> > if it works better. If that solves your problem, we can look at\n"
  "> > merging the changes.\n"
  "> > \n"
- "> > ????????Andrew\n"
+ "> > \302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240Andrew\n"
  "> \n"
  "> Thank your for the suggestion, and thanks Martin to explaining me over\n"
  "> IRC what actually I should do.\n"
@@ -46,14 +49,14 @@
  "> # modinfo meson_gxl\n"
  "> filename:\n"
  "> /lib/modules/4.12.0-rc4-4-ARCH/kernel/drivers/net/phy/meson-gxl.ko.gz\n"
- "> license:????????GPL\n"
- "> author:?????????Neil Armstrong <narmstrong@baylibre.com>\n"
- "> author:?????????Baoqi wang\n"
- "> description:????Amlogic Meson GXL Internal PHY driver\n"
- "> alias:??????????mdio:0000000110000001010001000000????\n"
+ "> license:\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240GPL\n"
+ "> author:\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240Neil Armstrong <narmstrong@baylibre.com>\n"
+ "> author:\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240Baoqi wang\n"
+ "> description:\302\240\302\240\302\240\302\240Amlogic Meson GXL Internal PHY driver\n"
+ "> alias:\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240mdio:0000000110000001010001000000????\n"
  "> depends:\n"
- "> intree:?????????Y\n"
- "> vermagic:???????4.12.0-rc4-4-ARCH SMP mod_unload aarch64\n"
+ "> intree:\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240\302\240Y\n"
+ "> vermagic:\302\240\302\240\302\240\302\240\302\240\302\240\302\2404.12.0-rc4-4-ARCH SMP mod_unload aarch64\n"
  "> #\n"
  "> # mii-tool -vvv eth0\n"
  "> Using SIOCGMIIPHY=0x8947\n"
@@ -62,19 +65,19 @@
  "Hum, 1000Mbps Half duplex looks duplex looks suspicious\n"
  "The PHY is supposed to be a 10/100, right ? or did I miss something ?\n"
  "\n"
- "> ? registers for MII PHY 8:\n"
- "> ????1000 782d 0181 4400 01e1 c1e1 000f 2001\n"
- "> ????ffff ffff ffff ffff ffff ffff ffff ffff\n"
- "> ????0040 0002 40e8 5400 1c1c 0000 0000 aaaa\n"
- "> ????fff0 ffff 0000 040a 1407 004a 0000 105a\n"
- "> ? product info: vendor 00:60:51, model 0 rev 0\n"
- "> ? basic mode:???autonegotiation enabled\n"
- "> ? basic status: autonegotiation complete, link ok\n"
- "> ? capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
+ "> \302\240 registers for MII PHY 8:\n"
+ "> \302\240\302\240\302\240\302\2401000 782d 0181 4400 01e1 c1e1 000f 2001\n"
+ "> \302\240\302\240\302\240\302\240ffff ffff ffff ffff ffff ffff ffff ffff\n"
+ "> \302\240\302\240\302\240\302\2400040 0002 40e8 5400 1c1c 0000 0000 aaaa\n"
+ "> \302\240\302\240\302\240\302\240fff0 ffff 0000 040a 1407 004a 0000 105a\n"
+ "> \302\240 product info: vendor 00:60:51, model 0 rev 0\n"
+ "> \302\240 basic mode:\302\240\302\240\302\240autonegotiation enabled\n"
+ "> \302\240 basic status: autonegotiation complete, link ok\n"
+ "> \302\240 capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
  "> 10baseT-FD 10baseT-HD\n"
- "> ? advertising:??1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
+ "> \302\240 advertising:\302\240\302\2401000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
  "> 10baseT-FD 10baseT-HD\n"
- "> ? link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
+ "> \302\240 link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
  "> 10baseT-FD 10baseT-HD\n"
  "> $\n"
  "> \n"
@@ -85,7 +88,7 @@
  "> Cloning into 'linux-stable'...\n"
  "> remote: Counting objects: 5948690, done.\n"
  "> remote: Compressing objects: 100% (124799/124799), done.\n"
- "> Receiving objects:???0% (11668/5948690), 2.27 MiB | 4.52 MiB/s\n"
+ "> Receiving objects:\302\240\302\240\302\2400% (11668/5948690), 2.27 MiB | 4.52 MiB/s\n"
  "> \n"
  "> shows timeout while trying to sync with NTP server:\n"
  "> \n"
@@ -99,19 +102,19 @@
  "> # mii-tool -vvv eth0\n"
  "> Using SIOCGMIIPHY=0x8947\n"
  "> eth0: negotiated 1000baseT-HD flow-control, link ok\n"
- "> ? registers for MII PHY 8:\n"
- "> ????1000 782d 0181 4400 01e1 c1e1 000d 2001\n"
- "> ????ffff ffff ffff ffff ffff ffff ffff ffff\n"
- "> ????0040 0002 40e8 5400 1c1c 0000 0000 aaaa\n"
- "> ????fff0 ffff 0000 040a 1407 0000 0000 105a\n"
- "> ? product info: vendor 00:60:51, model 0 rev 0\n"
- "> ? basic mode:???autonegotiation enabled\n"
- "> ? basic status: autonegotiation complete, link ok\n"
- "> ? capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
+ "> \302\240 registers for MII PHY 8:\n"
+ "> \302\240\302\240\302\240\302\2401000 782d 0181 4400 01e1 c1e1 000d 2001\n"
+ "> \302\240\302\240\302\240\302\240ffff ffff ffff ffff ffff ffff ffff ffff\n"
+ "> \302\240\302\240\302\240\302\2400040 0002 40e8 5400 1c1c 0000 0000 aaaa\n"
+ "> \302\240\302\240\302\240\302\240fff0 ffff 0000 040a 1407 0000 0000 105a\n"
+ "> \302\240 product info: vendor 00:60:51, model 0 rev 0\n"
+ "> \302\240 basic mode:\302\240\302\240\302\240autonegotiation enabled\n"
+ "> \302\240 basic status: autonegotiation complete, link ok\n"
+ "> \302\240 capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
  "> 10baseT-FD 10baseT-HD\n"
- "> ? advertising:??1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
+ "> \302\240 advertising:\302\240\302\2401000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
  "> 10baseT-FD 10baseT-HD\n"
- "> ? link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
+ "> \302\240 link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD\n"
  "> 10baseT-FD 10baseT-HD\n"
  "> #\n"
  "> \n"
@@ -126,7 +129,7 @@
  "> [Sun Jun 11 07:40:34 2017] meson8b-dwmac c9410000.ethernet eth0: PTP\n"
  "> not supported by HW\n"
  "> [Sun Jun 11 07:40:36 2017] brcmfmac: brcmf_c_preinit_dcmds: Firmware\n"
- "> version = wl0: Mar??1 2015 07:29:38 version 7.45.18 (r538002) FWID\n"
+ "> version = wl0: Mar\302\240\302\2401 2015 07:29:38 version 7.45.18 (r538002) FWID\n"
  "> 01-6a2c8ad4\n"
  "> [Sun Jun 11 07:40:36 2017] meson8b-dwmac c9410000.ethernet eth0: Link\n"
  "> is Up - 100Mbps/Full - flow control off\n"
@@ -162,7 +165,7 @@
  "> \n"
  "> _______________________________________________\n"
  "> linux-amlogic mailing list\n"
- "> linux-amlogic at lists.infradead.org\n"
+ "> linux-amlogic@lists.infradead.org\n"
  > http://lists.infradead.org/mailman/listinfo/linux-amlogic
 
-883d8231ea3f7214161f2cb493f3e5311a7b171340b567a2dbb6f876e8332593
+cf69a559638ede4949d4670bc2a9eb35e6c36550afbe58171d0e5b08632acf2d
