From: Abhishek Sahu <absahu@codeaurora.org>
To: sboyd@codeaurora.org, mturquette@baylibre.com
Cc: andy.gross@linaro.org, david.brown@linaro.org,
rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org,
Abhishek Sahu <absahu@codeaurora.org>
Subject: [RFC 11/12] clk: qcom: add read-only alpha pll post divider operations
Date: Thu, 27 Jul 2017 16:40:24 +0530 [thread overview]
Message-ID: <1501153825-5181-12-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1501153825-5181-1-git-send-email-absahu@codeaurora.org>
Some of the divider settings are preconfigured and should not
be changed by the clock framework during frequency change. This
patch adds the read-only divider operation for QCOM alpha pll
post divider which is equivalent to generic divider operations in
'commit 79c6ab509558 ("clk: divider: add CLK_DIVIDER_READ_ONLY flag")'.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
drivers/clk/qcom/clk-alpha-pll.c | 25 +++++++++++++++++++++++++
drivers/clk/qcom/clk-alpha-pll.h | 1 +
2 files changed, 26 insertions(+)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index e37a3ab..c3f5435 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -737,6 +737,25 @@ static long clk_alpha_pll_huayra_round_rate(struct clk_hw *hw,
pll->width, CLK_DIVIDER_POWER_OF_TWO);
}
+static long
+clk_alpha_pll_postdiv_round_ro_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+ u32 ctl, div;
+
+ regmap_read(pll->clkr.regmap, pll_user_ctl(pll), &ctl);
+
+ ctl >>= PLL_POST_DIV_SHIFT;
+ ctl &= BIT(pll->width) - 1;
+ div = 1 << fls(ctl);
+
+ if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)
+ *prate = clk_hw_round_rate(clk_hw_get_parent(hw), div * rate);
+
+ return DIV_ROUND_UP_ULL((u64)*prate, div);
+}
+
static int clk_alpha_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
@@ -757,3 +776,9 @@ static int clk_alpha_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
.set_rate = clk_alpha_pll_postdiv_set_rate,
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_ops);
+
+const struct clk_ops clk_alpha_pll_postdiv_ro_ops = {
+ .round_rate = clk_alpha_pll_postdiv_round_ro_rate,
+ .recalc_rate = clk_alpha_pll_postdiv_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_ro_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 891d14b..7138d03 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -109,6 +109,7 @@ struct alpha_pll_config {
extern const struct clk_ops clk_alpha_pll_hwfsm_ops;
extern const struct clk_ops clk_alpha_pll_huayra_ops;
extern const struct clk_ops clk_alpha_pll_postdiv_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_ro_ops;
void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2017-07-27 11:10 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-27 11:10 [RFC 00/12] Misc patches for QCOM clocks Abhishek Sahu
2017-07-27 11:10 ` [RFC 01/12] clk: qcom: support for register offsets from rcg2 clock node Abhishek Sahu
2017-07-27 18:44 ` Stephen Boyd
2017-07-28 9:42 ` Abhishek Sahu
2017-07-28 17:55 ` Stephen Boyd
2017-07-30 12:57 ` Abhishek Sahu
2017-07-27 11:10 ` [RFC 02/12] clk: qcom: flag for 64 bit CONFIG_CTL Abhishek Sahu
2017-07-28 18:33 ` Stephen Boyd
2017-07-30 13:04 ` Abhishek Sahu
2017-08-01 21:17 ` Stephen Boyd
2017-07-27 11:10 ` [RFC 03/12] clk: qcom: support for alpha mode configuration Abhishek Sahu
2017-07-27 11:10 ` [RFC 04/12] clk: qcom: use offset from alpha pll node Abhishek Sahu
2017-07-30 13:26 ` Abhishek Sahu
2017-07-27 11:10 ` [RFC 05/12] clk: qcom: fix 16 bit alpha support calculation Abhishek Sahu
2017-07-27 11:10 ` [RFC 06/12] Clk: qcom: support for dynamic updating the PLL Abhishek Sahu
2017-07-28 18:34 ` Stephen Boyd
2017-07-30 13:57 ` Abhishek Sahu
2017-08-01 21:12 ` Stephen Boyd
2017-08-02 13:50 ` Abhishek Sahu
2017-07-27 11:10 ` [RFC 07/12] clk: qcom: add flag for VCO operation Abhishek Sahu
2017-07-27 11:10 ` [RFC 08/12] clk: qcom: support for Huayra PLL Abhishek Sahu
2017-07-27 11:10 ` [RFC 09/12] clk: qcom: support for Brammo PLL Abhishek Sahu
2017-07-27 11:10 ` [RFC 10/12] clk: qcom: add read-only divider operations Abhishek Sahu
2017-07-27 11:10 ` Abhishek Sahu [this message]
2017-07-27 11:10 ` [RFC 12/12] clk: qcom: add parent map for regmap mux Abhishek Sahu
2017-07-27 18:39 ` [RFC 00/12] Misc patches for QCOM clocks Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501153825-5181-12-git-send-email-absahu@codeaurora.org \
--to=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.