diff for duplicates of <1501665634.2759.14.camel@baylibre.com> diff --git a/a/1.txt b/N1/1.txt index 900f58a..e229bbb 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -23,7 +23,7 @@ On Wed, 2017-08-02 at 10:54 +0800, Shawn Lin wrote: > > > > Yeah that would be my understanding as well > > -> > > ? Note that the spec does state that 400KHz is +> > > Note that the spec does state that 400KHz is > > > the max freq for indentification mode. But the fact is that almost all > > > cards could accept higher frequecncy. > > @@ -59,7 +59,7 @@ I made sure to delay the return of the host voltage_switch callback until the voltage is stable at 1.8v. This probably is a bit long but, at this stage, the clock is gated so the card -should?not see the difference, right ? +should not see the difference, right ? So on return of "mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)", the voltage should be stable at 1.8v and we will the get the 10ms (even if spec says @@ -126,8 +126,8 @@ Jerome > > > > jerome > > > > -- > > > > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in -> > > > the body of a message to majordomo at vger.kernel.org -> > > > More majordomo info at??http://vger.kernel.org/majordomo-info.html +> > > > the body of a message to majordomo@vger.kernel.org +> > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > > > > > > > > > diff --git a/a/content_digest b/N1/content_digest index b1fd963..e8baa28 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -2,10 +2,14 @@ "ref\003c65837-6d3c-c822-f505-838e90f34295@rock-chips.com\0" "ref\01501606582.2759.11.camel@baylibre.com\0" "ref\02b79f5e8-2a60-128a-0e24-011e8f4e122f@rock-chips.com\0" - "From\0jbrunet@baylibre.com (Jerome Brunet)\0" - "Subject\0mmc: UHS Voltage switch and operating frequency question\0" + "From\0Jerome Brunet <jbrunet@baylibre.com>\0" + "Subject\0Re: mmc: UHS Voltage switch and operating frequency question\0" "Date\0Wed, 02 Aug 2017 11:20:34 +0200\0" - "To\0linus-amlogic@lists.infradead.org\0" + "To\0Shawn Lin <shawn.lin@rock-chips.com>\0" + "Cc\0Ulf Hansson <ulf.hansson@linaro.org>" + Kevin Hilman <khilman@baylibre.com> + linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org> + " open list:ARM/Amlogic Meson... <linux-amlogic@lists.infradead.org>\0" "\00:1\0" "b\0" "On Wed, 2017-08-02 at 10:54 +0800, Shawn Lin wrote:\n" @@ -33,7 +37,7 @@ "> > \n" "> > Yeah that would be my understanding as well\n" "> > \n" - "> > > ? Note that the spec does state that 400KHz is\n" + "> > > \302\240 Note that the spec does state that 400KHz is\n" "> > > the max freq for indentification mode. But the fact is that almost all\n" "> > > cards could accept higher frequecncy.\n" "> > \n" @@ -69,7 +73,7 @@ "voltage is stable at 1.8v.\n" "\n" "This probably is a bit long but, at this stage, the clock is gated so the card\n" - "should?not see the difference, right ?\n" + "should\302\240not see the difference, right ?\n" "\n" "So on return of \"mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)\", the\n" "voltage should be stable at 1.8v and we will the get the 10ms (even if spec says\n" @@ -136,8 +140,8 @@ "> > > > jerome\n" "> > > > --\n" "> > > > To unsubscribe from this list: send the line \"unsubscribe linux-mmc\" in\n" - "> > > > the body of a message to majordomo at vger.kernel.org\n" - "> > > > More majordomo info at??http://vger.kernel.org/majordomo-info.html\n" + "> > > > the body of a message to majordomo@vger.kernel.org\n" + "> > > > More majordomo info at\302\240\302\240http://vger.kernel.org/majordomo-info.html\n" "> > > > \n" "> > > > \n" "> > > > \n" @@ -150,4 +154,4 @@ "> \n" > -1084c5d621f1ad09831baee101b1fde930e3429395b538e30eee29ebd30fdba8 +e94471855a8f7e02594dc34298ea8f36c1495ac6adb98ecd0ec75e3cef6e98cf
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.