All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: jiangyilism@gmail.com, gregkh@linuxfoundation.org, nab@linux-iscsi.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "iscsi-target: Always wait for kthread_should_stop() before kthread exit" has been added to the 3.18-stable tree
Date: Mon, 07 Aug 2017 17:03:29 -0700	[thread overview]
Message-ID: <1502150609141222@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    iscsi-target: Always wait for kthread_should_stop() before kthread exit

to the 3.18-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     iscsi-target-always-wait-for-kthread_should_stop-before-kthread-exit.patch
and it can be found in the queue-3.18 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 5e0cf5e6c43b9e19fc0284f69e5cd2b4a47523b0 Mon Sep 17 00:00:00 2001
From: Jiang Yi <jiangyilism@gmail.com>
Date: Tue, 16 May 2017 17:57:55 +0800
Subject: iscsi-target: Always wait for kthread_should_stop() before kthread exit

From: Jiang Yi <jiangyilism@gmail.com>

commit 5e0cf5e6c43b9e19fc0284f69e5cd2b4a47523b0 upstream.

There are three timing problems in the kthread usages of iscsi_target_mod:

 - np_thread of struct iscsi_np
 - rx_thread and tx_thread of struct iscsi_conn

In iscsit_close_connection(), it calls

 send_sig(SIGINT, conn->tx_thread, 1);
 kthread_stop(conn->tx_thread);

In conn->tx_thread, which is iscsi_target_tx_thread(), when it receive
SIGINT the kthread will exit without checking the return value of
kthread_should_stop().

So if iscsi_target_tx_thread() exit right between send_sig(SIGINT...)
and kthread_stop(...), the kthread_stop() will try to stop an already
stopped kthread.

This is invalid according to the documentation of kthread_stop().

(Fix -ECONNRESET logout handling in iscsi_target_tx_thread and
 early iscsi_target_rx_thread failure case - nab)

Signed-off-by: Jiang Yi <jiangyilism@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target.c       |   28 ++++++++++++++++++++++------
 drivers/target/iscsi/iscsi_target_erl0.c  |    6 +++++-
 drivers/target/iscsi/iscsi_target_erl0.h  |    2 +-
 drivers/target/iscsi/iscsi_target_login.c |    4 ++++
 4 files changed, 32 insertions(+), 8 deletions(-)

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -3931,6 +3931,8 @@ int iscsi_target_tx_thread(void *arg)
 {
 	int ret = 0;
 	struct iscsi_conn *conn = arg;
+	bool conn_freed = false;
+
 	/*
 	 * Allow ourselves to be interrupted by SIGINT so that a
 	 * connection recovery / failure event can be triggered externally.
@@ -3956,12 +3958,14 @@ get_immediate:
 			goto transport_err;
 
 		ret = iscsit_handle_response_queue(conn);
-		if (ret == 1)
+		if (ret == 1) {
 			goto get_immediate;
-		else if (ret == -ECONNRESET)
+		} else if (ret == -ECONNRESET) {
+			conn_freed = true;
 			goto out;
-		else if (ret < 0)
+		} else if (ret < 0) {
 			goto transport_err;
+		}
 	}
 
 transport_err:
@@ -3971,8 +3975,13 @@ transport_err:
 	 * responsible for cleaning up the early connection failure.
 	 */
 	if (conn->conn_state != TARG_CONN_STATE_IN_LOGIN)
-		iscsit_take_action_for_connection_exit(conn);
+		iscsit_take_action_for_connection_exit(conn, &conn_freed);
 out:
+	if (!conn_freed) {
+		while (!kthread_should_stop()) {
+			msleep(100);
+		}
+	}
 	return 0;
 }
 
@@ -4073,6 +4082,7 @@ int iscsi_target_rx_thread(void *arg)
 	u32 checksum = 0, digest = 0;
 	struct iscsi_conn *conn = arg;
 	struct kvec iov;
+	bool conn_freed = false;
 	/*
 	 * Allow ourselves to be interrupted by SIGINT so that a
 	 * connection recovery / failure event can be triggered externally.
@@ -4084,7 +4094,7 @@ int iscsi_target_rx_thread(void *arg)
 	 */
 	rc = wait_for_completion_interruptible(&conn->rx_login_comp);
 	if (rc < 0 || iscsi_target_check_conn_state(conn))
-		return 0;
+		goto out;
 
 	if (conn->conn_transport->transport_type == ISCSI_INFINIBAND) {
 		struct completion comp;
@@ -4169,7 +4179,13 @@ int iscsi_target_rx_thread(void *arg)
 transport_err:
 	if (!signal_pending(current))
 		atomic_set(&conn->transport_failed, 1);
-	iscsit_take_action_for_connection_exit(conn);
+	iscsit_take_action_for_connection_exit(conn, &conn_freed);
+out:
+	if (!conn_freed) {
+		while (!kthread_should_stop()) {
+			msleep(100);
+		}
+	}
 	return 0;
 }
 
--- a/drivers/target/iscsi/iscsi_target_erl0.c
+++ b/drivers/target/iscsi/iscsi_target_erl0.c
@@ -931,8 +931,10 @@ static void iscsit_handle_connection_cle
 	}
 }
 
-void iscsit_take_action_for_connection_exit(struct iscsi_conn *conn)
+void iscsit_take_action_for_connection_exit(struct iscsi_conn *conn, bool *conn_freed)
 {
+	*conn_freed = false;
+
 	spin_lock_bh(&conn->state_lock);
 	if (atomic_read(&conn->connection_exit)) {
 		spin_unlock_bh(&conn->state_lock);
@@ -943,6 +945,7 @@ void iscsit_take_action_for_connection_e
 	if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT) {
 		spin_unlock_bh(&conn->state_lock);
 		iscsit_close_connection(conn);
+		*conn_freed = true;
 		return;
 	}
 
@@ -956,6 +959,7 @@ void iscsit_take_action_for_connection_e
 	spin_unlock_bh(&conn->state_lock);
 
 	iscsit_handle_connection_cleanup(conn);
+	*conn_freed = true;
 }
 
 /*
--- a/drivers/target/iscsi/iscsi_target_erl0.h
+++ b/drivers/target/iscsi/iscsi_target_erl0.h
@@ -9,7 +9,7 @@ extern int iscsit_stop_time2retain_timer
 extern void iscsit_connection_reinstatement_rcfr(struct iscsi_conn *);
 extern void iscsit_cause_connection_reinstatement(struct iscsi_conn *, int);
 extern void iscsit_fall_back_to_erl0(struct iscsi_session *);
-extern void iscsit_take_action_for_connection_exit(struct iscsi_conn *);
+extern void iscsit_take_action_for_connection_exit(struct iscsi_conn *, bool *);
 extern int iscsit_recover_from_unknown_opcode(struct iscsi_conn *);
 
 #endif   /*** ISCSI_TARGET_ERL0_H ***/
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -1492,5 +1492,9 @@ int iscsi_target_login_thread(void *arg)
 			break;
 	}
 
+	while (!kthread_should_stop()) {
+		msleep(100);
+	}
+
 	return 0;
 }


Patches currently in stable-queue which might be from jiangyilism@gmail.com are

queue-3.18/iscsi-target-always-wait-for-kthread_should_stop-before-kthread-exit.patch

                 reply	other threads:[~2017-08-08  0:03 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1502150609141222@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=jiangyilism@gmail.com \
    --cc=nab@linux-iscsi.org \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.