From: Abhishek Sahu <absahu@codeaurora.org>
To: sboyd@codeaurora.org, mturquette@baylibre.com
Cc: andy.gross@linaro.org, david.brown@linaro.org,
rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org,
Abhishek Sahu <absahu@codeaurora.org>
Subject: [RFC v2 06/12] clk: qcom: add flag for VCO operation
Date: Tue, 8 Aug 2017 23:54:11 +0530 [thread overview]
Message-ID: <1502216657-3342-7-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1502216657-3342-1-git-send-email-absahu@codeaurora.org>
Some of the Alpha PLL’s does not have VCO configuration so this
patch adds the flag and does not perform VCO operation if this
flag is set.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
drivers/clk/qcom/clk-alpha-pll.c | 19 +++++++++++--------
drivers/clk/qcom/clk-alpha-pll.h | 1 +
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 1f37bf8a..c368e7c 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -467,10 +467,12 @@ static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
u64 a;
rate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
- vco = alpha_pll_find_vco(pll, rate);
- if (!vco) {
- pr_err("alpha pll not in a valid vco range\n");
- return -EINVAL;
+ if (!(pll->flags & SUPPORTS_NO_VCO)) {
+ vco = alpha_pll_find_vco(pll, rate);
+ if (!vco) {
+ pr_err("alpha pll not in a valid vco range\n");
+ return -EINVAL;
+ }
}
regmap_write(pll->clkr.regmap, pll_l(pll), l);
@@ -483,9 +485,10 @@ static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
regmap_write(pll->clkr.regmap, pll_alpha(pll), a);
- regmap_update_bits(pll->clkr.regmap, pll_user_ctl(pll),
- PLL_VCO_MASK << PLL_VCO_SHIFT,
- vco->val << PLL_VCO_SHIFT);
+ if (!(pll->flags & SUPPORTS_NO_VCO))
+ regmap_update_bits(pll->clkr.regmap, pll_user_ctl(pll),
+ PLL_VCO_MASK << PLL_VCO_SHIFT,
+ vco->val << PLL_VCO_SHIFT);
regmap_update_bits(pll->clkr.regmap, pll_user_ctl(pll), PLL_ALPHA_EN,
PLL_ALPHA_EN);
@@ -505,7 +508,7 @@ static long clk_alpha_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long min_freq, max_freq;
rate = alpha_pll_round_rate(rate, *prate, &l, &a, alpha_width);
- if (alpha_pll_find_vco(pll, rate))
+ if ((pll->flags & SUPPORTS_NO_VCO) || alpha_pll_find_vco(pll, rate))
return rate;
min_freq = pll->vco_table[0].min_freq;
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 8b27c05..973673b 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -55,6 +55,7 @@ struct clk_alpha_pll {
#define SUPPORTS_FSM_MODE BIT(2)
#define SUPPORTS_64BIT_CONFIG_CTL BIT(3)
#define SUPPORTS_DYNAMIC_UPDATE BIT(4)
+#define SUPPORTS_NO_VCO BIT(5)
u8 flags;
struct clk_regmap clkr;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2017-08-08 18:24 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-08 18:24 [RFC v2 00/12] Misc patches for QCOM clocks Abhishek Sahu
2017-08-08 18:24 ` [RFC v2 01/12] clk: qcom: flag for 64 bit CONFIG_CTL Abhishek Sahu
2017-08-08 18:24 ` [RFC v2 02/12] clk: qcom: support for alpha mode configuration Abhishek Sahu
2017-08-08 18:24 ` [RFC v2 03/12] clk: qcom: use offset from alpha pll node Abhishek Sahu
2017-08-08 18:24 ` [RFC v2 04/12] clk: qcom: fix 16 bit alpha support calculation Abhishek Sahu
2017-08-08 18:24 ` [RFC v2 05/12] clk: qcom: support for dynamic updating the PLL Abhishek Sahu
2017-08-08 18:24 ` Abhishek Sahu [this message]
2017-08-08 18:24 ` [RFC v2 07/12] clk: qcom: support for Huayra PLL Abhishek Sahu
2017-08-08 18:24 ` [RFC v2 08/12] clk: qcom: support for Brammo PLL Abhishek Sahu
2017-08-08 18:24 ` [RFC v2 09/12] clk: qcom: support for 2 bit PLL post divider Abhishek Sahu
2017-08-08 18:24 ` [RFC v2 10/12] clk: qcom: add read-only alpha pll post divider operations Abhishek Sahu
2017-08-08 18:24 ` [RFC v2 11/12] clk: qcom: add read-only " Abhishek Sahu
2017-08-08 18:24 ` [RFC v2 12/12] clk: qcom: add parent map for regmap mux Abhishek Sahu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502216657-3342-7-git-send-email-absahu@codeaurora.org \
--to=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.