From: Thomas Huth <thuth@redhat.com>
To: qemu-devel@nongnu.org, Cornelia Huck <cohuck@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>,
Christian Borntraeger <borntraeger@de.ibm.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
Victor Kaplansky <victork@redhat.com>
Subject: [Qemu-devel] [PATCH v2 for-2.11 2/2] tests/pxe: Check virtio-net-ccw on s390x
Date: Fri, 11 Aug 2017 07:57:56 +0200 [thread overview]
Message-ID: <1502431076-22849-3-git-send-email-thuth@redhat.com> (raw)
In-Reply-To: <1502431076-22849-1-git-send-email-thuth@redhat.com>
Now that we've got a firmware that can do TFTP booting on s390x (i.e.
the pc-bios/s390-netboot.img), we can enable the PXE tester for this
architecture, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/Makefile.include | 1 +
tests/boot-sector.c | 20 ++++++++++++++++++++
tests/pxe-test.c | 7 +++++++
3 files changed, 28 insertions(+)
diff --git a/tests/Makefile.include b/tests/Makefile.include
index eb4895f..2a238db 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -337,6 +337,7 @@ check-qtest-microblazeel-y = $(check-qtest-microblaze-y)
check-qtest-xtensaeb-y = $(check-qtest-xtensa-y)
check-qtest-s390x-y = tests/boot-serial-test$(EXESUF)
+check-qtest-s390x-$(CONFIG_SLIRP) += tests/pxe-test$(EXESUF)
check-qtest-generic-y += tests/qom-test$(EXESUF)
check-qtest-generic-y += tests/test-hmp$(EXESUF)
diff --git a/tests/boot-sector.c b/tests/boot-sector.c
index 8729562..9ee8537 100644
--- a/tests/boot-sector.c
+++ b/tests/boot-sector.c
@@ -67,6 +67,21 @@ static uint8_t x86_boot_sector[512] = {
[0x1FF] = 0xAA,
};
+/* For s390x, use a mini "kernel" with the appropriate signature */
+static const uint8_t s390x_psw[] = {
+ 0x00, 0x08, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00
+};
+static const uint8_t s390x_code[] = {
+ 0xa7, 0xf4, 0x00, 0x0a, /* j 0x10010 */
+ 0x00, 0x00, 0x00, 0x00,
+ 'S', '3', '9', '0',
+ 'E', 'P', 0x00, 0x01,
+ 0xa7, 0x38, HIGH(SIGNATURE_ADDR), LOW(SIGNATURE_ADDR), /* lhi r3,0x7c10 */
+ 0xa7, 0x48, LOW(SIGNATURE), HIGH(SIGNATURE), /* lhi r4,0xadde */
+ 0x40, 0x40, 0x30, 0x00, /* sth r4,0(r3) */
+ 0xa7, 0xf4, 0xff, 0xfa /* j 0x10010 */
+};
+
/* Create boot disk file. */
int boot_sector_init(char *fname)
{
@@ -92,6 +107,11 @@ int boot_sector_init(char *fname)
LOW(SIGNATURE), SIGNATURE_ADDR,
HIGH(SIGNATURE), SIGNATURE_ADDR + 1);
len = strlen(boot_code);
+ } else if (g_str_equal(arch, "s390x")) {
+ len = 0x10000 + sizeof(s390x_code);
+ boot_code = g_malloc0(len);
+ memcpy(boot_code, s390x_psw, sizeof(s390x_psw));
+ memcpy(&boot_code[0x10000], s390x_code, sizeof(s390x_code));
} else {
g_assert_not_reached();
}
diff --git a/tests/pxe-test.c b/tests/pxe-test.c
index cf6e225..0d70afc 100644
--- a/tests/pxe-test.c
+++ b/tests/pxe-test.c
@@ -51,6 +51,11 @@ static void test_pxe_spapr_vlan(void)
test_pxe_one("-device spapr-vlan,netdev=" NETNAME, true);
}
+static void test_pxe_virtio_ccw(void)
+{
+ test_pxe_one("-device virtio-net-ccw,bootindex=1,netdev=" NETNAME, false);
+}
+
int main(int argc, char *argv[])
{
int ret;
@@ -68,6 +73,8 @@ int main(int argc, char *argv[])
} else if (strcmp(arch, "ppc64") == 0) {
qtest_add_func("pxe/virtio", test_pxe_virtio_pci);
qtest_add_func("pxe/spapr-vlan", test_pxe_spapr_vlan);
+ } else if (g_str_equal(arch, "s390x")) {
+ qtest_add_func("pxe/virtio-ccw", test_pxe_virtio_ccw);
}
ret = g_test_run();
boot_sector_cleanup(disk);
--
1.8.3.1
next prev parent reply other threads:[~2017-08-11 5:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-11 5:57 [Qemu-devel] [PATCH v2 for-2.11 0/2] Improvements for the pxe tester Thomas Huth
2017-08-11 5:57 ` [Qemu-devel] [PATCH v2 for-2.11 1/2] tests/boot-sector: Do not overwrite the x86 buffer on other architectures Thomas Huth
2017-08-15 14:54 ` Cornelia Huck
2017-08-11 5:57 ` Thomas Huth [this message]
2017-08-15 15:26 ` [Qemu-devel] [PATCH v2 for-2.11 2/2] tests/pxe: Check virtio-net-ccw on s390x Cornelia Huck
2017-08-11 9:49 ` [Qemu-devel] [PATCH v2 for-2.11 0/2] Improvements for the pxe tester Cornelia Huck
2017-08-11 10:19 ` Cornelia Huck
2017-08-11 10:52 ` Thomas Huth
2017-08-11 11:43 ` Cornelia Huck
2017-08-14 14:35 ` Michael S. Tsirkin
2017-08-15 15:27 ` Cornelia Huck
2017-08-18 11:29 ` Cornelia Huck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502431076-22849-3-git-send-email-thuth@redhat.com \
--to=thuth@redhat.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=jasowang@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=victork@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.