From: <gregkh@linuxfoundation.org>
To: nab@linux-iscsi.org, gregkh@linuxfoundation.org, jmaggard01@gmail.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "target: Fix node_acl demo-mode + uncached dynamic shutdown regression" has been added to the 4.9-stable tree
Date: Sun, 13 Aug 2017 15:19:31 -0700 [thread overview]
Message-ID: <150266277128230@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
target: Fix node_acl demo-mode + uncached dynamic shutdown regression
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
target-fix-node_acl-demo-mode-uncached-dynamic-shutdown-regression.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 6f48655facfd7f7ccfe6d252ac0fe319ab02e4dd Mon Sep 17 00:00:00 2001
From: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Sun, 6 Aug 2017 16:10:03 -0700
Subject: target: Fix node_acl demo-mode + uncached dynamic shutdown regression
From: Nicholas Bellinger <nab@linux-iscsi.org>
commit 6f48655facfd7f7ccfe6d252ac0fe319ab02e4dd upstream.
This patch fixes a generate_node_acls = 1 + cache_dynamic_acls = 0
regression, that was introduced by
commit 01d4d673558985d9a118e1e05026633c3e2ade9b
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Wed Dec 7 12:55:54 2016 -0800
which originally had the proper list_del_init() usage, but was
dropped during list review as it was thought unnecessary by HCH.
However, list_del_init() usage is required during the special
generate_node_acls = 1 + cache_dynamic_acls = 0 case when
transport_free_session() does a list_del(&se_nacl->acl_list),
followed by target_complete_nacl() doing the same thing.
This was manifesting as a general protection fault as reported
by Justin:
kernel: general protection fault: 0000 [#1] SMP
kernel: Modules linked in:
kernel: CPU: 0 PID: 11047 Comm: iscsi_ttx Not tainted 4.13.0-rc2.x86_64.1+ #20
kernel: Hardware name: Intel Corporation S5500BC/S5500BC, BIOS S5500.86B.01.00.0064.050520141428 05/05/2014
kernel: task: ffff88026939e800 task.stack: ffffc90007884000
kernel: RIP: 0010:target_put_nacl+0x49/0xb0
kernel: RSP: 0018:ffffc90007887d70 EFLAGS: 00010246
kernel: RAX: dead000000000200 RBX: ffff8802556ca000 RCX: 0000000000000000
kernel: RDX: dead000000000100 RSI: 0000000000000246 RDI: ffff8802556ce028
kernel: RBP: ffffc90007887d88 R08: 0000000000000001 R09: 0000000000000000
kernel: R10: ffffc90007887df8 R11: ffffea0009986900 R12: ffff8802556ce020
kernel: R13: ffff8802556ce028 R14: ffff8802556ce028 R15: ffffffff88d85540
kernel: FS: 0000000000000000(0000) GS:ffff88027fc00000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007fffe36f5f94 CR3: 0000000009209000 CR4: 00000000003406f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: Call Trace:
kernel: transport_free_session+0x67/0x140
kernel: transport_deregister_session+0x7a/0xc0
kernel: iscsit_close_session+0x92/0x210
kernel: iscsit_close_connection+0x5f9/0x840
kernel: iscsit_take_action_for_connection_exit+0xfe/0x110
kernel: iscsi_target_tx_thread+0x140/0x1e0
kernel: ? wait_woken+0x90/0x90
kernel: kthread+0x124/0x160
kernel: ? iscsit_thread_get_cpumask+0x90/0x90
kernel: ? kthread_create_on_node+0x40/0x40
kernel: ret_from_fork+0x22/0x30
kernel: Code: 00 48 89 fb 4c 8b a7 48 01 00 00 74 68 4d 8d 6c 24 08 4c
89 ef e8 e8 28 43 00 48 8b 93 20 04 00 00 48 8b 83 28 04 00 00 4c 89
ef <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 20
kernel: RIP: target_put_nacl+0x49/0xb0 RSP: ffffc90007887d70
kernel: ---[ end trace f12821adbfd46fed ]---
To address this, go ahead and use proper list_del_list() for all
cases of se_nacl->acl_list deletion.
Reported-by: Justin Maggard <jmaggard01@gmail.com>
Tested-by: Justin Maggard <jmaggard01@gmail.com>
Cc: Justin Maggard <jmaggard01@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/target_core_tpg.c | 4 ++--
drivers/target/target_core_transport.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -364,7 +364,7 @@ void core_tpg_del_initiator_node_acl(str
mutex_lock(&tpg->acl_node_mutex);
if (acl->dynamic_node_acl)
acl->dynamic_node_acl = 0;
- list_del(&acl->acl_list);
+ list_del_init(&acl->acl_list);
mutex_unlock(&tpg->acl_node_mutex);
target_shutdown_sessions(acl);
@@ -540,7 +540,7 @@ int core_tpg_deregister(struct se_portal
* in transport_deregister_session().
*/
list_for_each_entry_safe(nacl, nacl_tmp, &node_list, acl_list) {
- list_del(&nacl->acl_list);
+ list_del_init(&nacl->acl_list);
core_tpg_wait_for_nacl_pr_ref(nacl);
core_free_device_list_for_node(nacl, se_tpg);
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -465,7 +465,7 @@ static void target_complete_nacl(struct
}
mutex_lock(&se_tpg->acl_node_mutex);
- list_del(&nacl->acl_list);
+ list_del_init(&nacl->acl_list);
mutex_unlock(&se_tpg->acl_node_mutex);
core_tpg_wait_for_nacl_pr_ref(nacl);
@@ -537,7 +537,7 @@ void transport_free_session(struct se_se
spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags);
if (se_nacl->dynamic_stop)
- list_del(&se_nacl->acl_list);
+ list_del_init(&se_nacl->acl_list);
}
mutex_unlock(&se_tpg->acl_node_mutex);
Patches currently in stable-queue which might be from nab@linux-iscsi.org are
queue-4.9/target-fix-node_acl-demo-mode-uncached-dynamic-shutdown-regression.patch
queue-4.9/iscsi-target-fix-memory-leak-in-iscsit_setup_text_cmd.patch
queue-4.9/iscsi-target-fix-iscsi_np-reset-hung-task-during-parallel-delete.patch
reply other threads:[~2017-08-14 0:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=150266277128230@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=jmaggard01@gmail.com \
--cc=nab@linux-iscsi.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.