From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
Don Brace <don.brace@microsemi.com>, Meelis Roos <mroos@linux.ee>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>,
Hannes Reinecke <hare@suse.com>
Subject: [PATCHv2 1/6] hpsa: add support for legacy boards
Date: Mon, 14 Aug 2017 13:19:10 +0200 [thread overview]
Message-ID: <1502709555-15837-2-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1502709555-15837-1-git-send-email-hare@suse.de>
Add support for legacy boards, ensuring to enable the driver for
those boards only when 'hpsa_allow_any' is set.
The attribute 'legacy_board' is set to '1' if the device is
a legacy board, and '0' otherwise.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Cc: Don Brace <don.brace@microsemi.com>
---
drivers/scsi/hpsa.c | 67 +++++++++++++++++++++++++++++++++++++++-----
drivers/scsi/hpsa.h | 81 ++++++++++++++++++++++++++++++++++++++++-------------
2 files changed, 121 insertions(+), 27 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 4f7cdb2..fbe7fbc 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -148,6 +148,8 @@
{PCI_VENDOR_ID_HP, 0x333f, 0x103c, 0x333f},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
+ {PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};
@@ -158,6 +160,26 @@
* access = Address of the struct of function pointers
*/
static struct board_type products[] = {
+ {0x40700E11, "Smart Array 5300", &SA5A_access},
+ {0x40800E11, "Smart Array 5i", &SA5B_access},
+ {0x40820E11, "Smart Array 532", &SA5B_access},
+ {0x40830E11, "Smart Array 5312", &SA5B_access},
+ {0x409A0E11, "Smart Array 641", &SA5A_access},
+ {0x409B0E11, "Smart Array 642", &SA5A_access},
+ {0x409C0E11, "Smart Array 6400", &SA5A_access},
+ {0x409D0E11, "Smart Array 6400 EM", &SA5A_access},
+ {0x40910E11, "Smart Array 6i", &SA5A_access},
+ {0x3225103C, "Smart Array P600", &SA5A_access},
+ {0x3223103C, "Smart Array P800", &SA5A_access},
+ {0x3234103C, "Smart Array P400", &SA5A_access},
+ {0x3235103C, "Smart Array P400i", &SA5A_access},
+ {0x3211103C, "Smart Array E200i", &SA5A_access},
+ {0x3212103C, "Smart Array E200", &SA5A_access},
+ {0x3213103C, "Smart Array E200i", &SA5A_access},
+ {0x3214103C, "Smart Array E200i", &SA5A_access},
+ {0x3215103C, "Smart Array E200i", &SA5A_access},
+ {0x3237103C, "Smart Array E500", &SA5A_access},
+ {0x323D103C, "Smart Array P700m", &SA5A_access},
{0x3241103C, "Smart Array P212", &SA5_access},
{0x3243103C, "Smart Array P410", &SA5_access},
{0x3245103C, "Smart Array P410i", &SA5_access},
@@ -278,7 +300,8 @@ static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
u64 *cfg_offset);
static int hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
unsigned long *memory_bar);
-static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id);
+static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id,
+ bool *legacy_board);
static int wait_for_device_to_become_ready(struct ctlr_info *h,
unsigned char lunaddr[],
int reply_queue);
@@ -866,6 +889,16 @@ static ssize_t host_show_ctlr_num(struct device *dev,
return snprintf(buf, 20, "%d\n", h->ctlr);
}
+static ssize_t host_show_legacy_board(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ctlr_info *h;
+ struct Scsi_Host *shost = class_to_shost(dev);
+
+ h = shost_to_hba(shost);
+ return snprintf(buf, 20, "%d\n", h->legacy_board ? 1 : 0);
+}
+
static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL);
static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL);
@@ -891,6 +924,8 @@ static DEVICE_ATTR(lockup_detected, S_IRUGO,
host_show_lockup_detected, NULL);
static DEVICE_ATTR(ctlr_num, S_IRUGO,
host_show_ctlr_num, NULL);
+static DEVICE_ATTR(legacy_board, S_IRUGO,
+ host_show_legacy_board, NULL);
static struct device_attribute *hpsa_sdev_attrs[] = {
&dev_attr_raid_level,
@@ -912,6 +947,7 @@ static DEVICE_ATTR(ctlr_num, S_IRUGO,
&dev_attr_raid_offload_debug,
&dev_attr_lockup_detected,
&dev_attr_ctlr_num,
+ &dev_attr_legacy_board,
NULL,
};
@@ -7232,7 +7268,8 @@ static int hpsa_interrupt_mode(struct ctlr_info *h)
return 0;
}
-static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
+static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id,
+ bool *legacy_board)
{
int i;
u32 subsystem_vendor_id, subsystem_device_id;
@@ -7242,9 +7279,22 @@ static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
*board_id = ((subsystem_device_id << 16) & 0xffff0000) |
subsystem_vendor_id;
+ if (legacy_board)
+ *legacy_board = false;
for (i = 0; i < ARRAY_SIZE(products); i++)
- if (*board_id == products[i].board_id)
- return i;
+ if (*board_id == products[i].board_id) {
+ if (products[i].access != &SA5A_access &&
+ products[i].access != &SA5B_access)
+ return i;
+ if (hpsa_allow_any) {
+ dev_warn(&pdev->dev,
+ "legacy board ID: 0x%08x\n",
+ *board_id);
+ if (legacy_board)
+ *legacy_board = true;
+ return i;
+ }
+ }
if ((subsystem_vendor_id != PCI_VENDOR_ID_HP &&
subsystem_vendor_id != PCI_VENDOR_ID_COMPAQ) ||
@@ -7253,6 +7303,8 @@ static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
"0x%08x, ignoring.\n", *board_id);
return -ENODEV;
}
+ if (legacy_board)
+ *legacy_board = true;
return ARRAY_SIZE(products) - 1; /* generic unknown smart array */
}
@@ -7555,13 +7607,14 @@ static void hpsa_free_pci_init(struct ctlr_info *h)
static int hpsa_pci_init(struct ctlr_info *h)
{
int prod_index, err;
+ bool legacy_board;
- prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id);
+ prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id, &legacy_board);
if (prod_index < 0)
return prod_index;
h->product_name = products[prod_index].product_name;
h->access = *(products[prod_index].access);
-
+ h->legacy_board = legacy_board;
pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
@@ -8241,7 +8294,7 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (number_of_controllers == 0)
printk(KERN_INFO DRIVER_NAME "\n");
- rc = hpsa_lookup_board_id(pdev, &board_id);
+ rc = hpsa_lookup_board_id(pdev, &board_id, NULL);
if (rc < 0) {
dev_warn(&pdev->dev, "Board ID not found\n");
return rc;
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 1c49741..018f980 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -293,6 +293,7 @@ struct ctlr_info {
int drv_req_rescan;
int raid_offload_debug;
int discovery_polling;
+ int legacy_board;
struct ReportLUNdata *lastlogicals;
int needs_abort_tags_swizzled;
struct workqueue_struct *resubmit_wq;
@@ -447,6 +448,23 @@ static void SA5_intr_mask(struct ctlr_info *h, unsigned long val)
}
}
+/*
+ * Variant of the above; 0x04 turns interrupts off...
+ */
+static void SA5B_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+ if (val) { /* Turn interrupts on */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else { /* Turn them off */
+ h->interrupts_enabled = 0;
+ writel(SA5B_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
{
if (val) { /* turn on interrupts */
@@ -549,6 +567,14 @@ static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h)
true : false;
}
+/*
+ * Returns true if an interrupt is pending..
+ */
+static bool SA5B_intr_pending(struct ctlr_info *h)
+{
+ return readl(h->vaddr + SA5_INTR_STATUS) & SA5B_INTR_PENDING;
+}
+
#define IOACCEL_MODE1_REPLY_QUEUE_INDEX 0x1A0
#define IOACCEL_MODE1_PRODUCER_INDEX 0x1B8
#define IOACCEL_MODE1_CONSUMER_INDEX 0x1BC
@@ -581,38 +607,53 @@ static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q)
}
static struct access_method SA5_access = {
- .submit_command = SA5_submit_command,
- .set_intr_mask = SA5_intr_mask,
- .intr_pending = SA5_intr_pending,
- .command_completed = SA5_completed,
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_intr_mask,
+ .intr_pending = SA5_intr_pending,
+ .command_completed = SA5_completed,
+};
+
+/* Duplicate entry of the above to mark unsupported boards */
+static struct access_method SA5A_access = {
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_intr_mask,
+ .intr_pending = SA5_intr_pending,
+ .command_completed = SA5_completed,
+};
+
+static struct access_method SA5B_access = {
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5B_intr_mask,
+ .intr_pending = SA5B_intr_pending,
+ .command_completed = SA5_completed,
};
static struct access_method SA5_ioaccel_mode1_access = {
- .submit_command = SA5_submit_command,
- .set_intr_mask = SA5_performant_intr_mask,
- .intr_pending = SA5_ioaccel_mode1_intr_pending,
- .command_completed = SA5_ioaccel_mode1_completed,
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_ioaccel_mode1_intr_pending,
+ .command_completed = SA5_ioaccel_mode1_completed,
};
static struct access_method SA5_ioaccel_mode2_access = {
- .submit_command = SA5_submit_command_ioaccel2,
- .set_intr_mask = SA5_performant_intr_mask,
- .intr_pending = SA5_performant_intr_pending,
- .command_completed = SA5_performant_completed,
+ .submit_command = SA5_submit_command_ioaccel2,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_performant_intr_pending,
+ .command_completed = SA5_performant_completed,
};
static struct access_method SA5_performant_access = {
- .submit_command = SA5_submit_command,
- .set_intr_mask = SA5_performant_intr_mask,
- .intr_pending = SA5_performant_intr_pending,
- .command_completed = SA5_performant_completed,
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_performant_intr_pending,
+ .command_completed = SA5_performant_completed,
};
static struct access_method SA5_performant_access_no_read = {
- .submit_command = SA5_submit_command_no_read,
- .set_intr_mask = SA5_performant_intr_mask,
- .intr_pending = SA5_performant_intr_pending,
- .command_completed = SA5_performant_completed,
+ .submit_command = SA5_submit_command_no_read,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_performant_intr_pending,
+ .command_completed = SA5_performant_completed,
};
struct board_type {
--
1.8.5.6
next prev parent reply other threads:[~2017-08-14 11:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-14 11:19 [PATCHv2 0/6] hpsa legacy support Hannes Reinecke
2017-08-14 11:19 ` Hannes Reinecke [this message]
2017-08-14 11:19 ` [PATCHv2 2/6] hpsa: disable volume status check for legacy boards Hannes Reinecke
2017-08-14 11:19 ` [PATCHv2 3/6] hpsa: Ignore errors for unsupported LV_DEVICE_ID VPD page Hannes Reinecke
2017-08-14 11:19 ` [PATCHv2 4/6] hpsa: do not print errors for unsupported report luns format Hannes Reinecke
2017-08-14 11:19 ` [PATCHv2 5/6] hpsa: handle unsupported devices more gracefully Hannes Reinecke
2017-08-14 11:19 ` [PATCHv2 6/6] cciss: Drop obsolete driver Hannes Reinecke
2017-08-14 18:10 ` Don Brace
2017-08-15 3:39 ` [PATCHv2 0/6] hpsa legacy support Martin K. Petersen
2017-08-15 6:22 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502709555-15837-2-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=don.brace@microsemi.com \
--cc=hare@suse.com \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=mroos@linux.ee \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.