diff for duplicates of <1502717875.2586.13.camel@synopsys.com> diff --git a/a/1.txt b/N1/1.txt index aa9e199..861d5b9 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,7 +1,7 @@ -On Fri, 2017-08-11@15:46 +0200, Philipp Zabel wrote: +On Fri, 2017-08-11 at 15:46 +0200, Philipp Zabel wrote: > Hi Eugeniy, > -> On Thu, 2017-08-10@19:41 +0300, Eugeniy Paltsev wrote: +> On Thu, 2017-08-10 at 19:41 +0300, Eugeniy Paltsev wrote: > > ARC AXS10x boards support custom IP-block which allows to control > > reset signals of selected peripherals. For example DW GMAC, etc... > > This block is controlled via memory-mapped register (AKA CREG) @@ -9,9 +9,9 @@ On Fri, 2017-08-11@15:46 +0200, Philipp Zabel wrote: > > represents up-to 32 reset lines. > > > > As of today only the following lines are used: -> > ?- DW GMAC - line 5 +> >  - DW GMAC - line 5 > > -> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com> +> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> > > Could you check if the reset-simple driver that I posted today would > work for you? @@ -19,4 +19,4 @@ On Fri, 2017-08-11@15:46 +0200, Philipp Zabel wrote: Yes, it would. Thanks. -- -?Eugeniy Paltsev + Eugeniy PaltsevN‹§²æìr¸›yúèšØb²X¬¶Ç§vØ^–)Þº{.nÇ+‰·zøœzÚÞz)í…æèw*\x1fjg¬±¨\x1e¶‰šŽŠÝ¢j.ïÛ°\½½MŽúgjÌæa×\x02››–' ™©Þ¢¸\f¢·¦j:+v‰¨ŠwèjØm¶Ÿÿ¾\a«‘êçzZ+ƒùšŽŠÝ¢j"ú!¶i diff --git a/a/content_digest b/N1/content_digest index 877e545..fada492 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,15 +1,22 @@ "ref\020170810164112.9894-1-Eugeniy.Paltsev@synopsys.com\0" "ref\01502459172.2310.16.camel@pengutronix.de\0" - "From\0Eugeniy.Paltsev@synopsys.com (Eugeniy Paltsev)\0" - "Subject\0[PATCH] ARC: reset: introduce AXS10x reset driver\0" + "ref\01502459172.2310.16.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org\0" + "From\0Eugeniy Paltsev <Eugeniy.Paltsev-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>\0" + "Subject\0Re: [PATCH] ARC: reset: introduce AXS10x reset driver\0" "Date\0Mon, 14 Aug 2017 13:37:56 +0000\0" - "To\0linux-snps-arc@lists.infradead.org\0" + "To\0p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>\0" + "Cc\0linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>" + mark.rutland-5wv7dgnIgG8@public.gmane.org <mark.rutland-5wv7dgnIgG8@public.gmane.org> + Eugeniy.Paltsev-HKixBCOQz3hWk0Htik3J/w@public.gmane.org <Eugeniy.Paltsev-HKixBCOQz3hWk0Htik3J/w@public.gmane.org> + robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> + linux-snps-arc-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org <linux-snps-arc-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> + " devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>\0" "\00:1\0" "b\0" - "On Fri, 2017-08-11@15:46 +0200, Philipp Zabel wrote:\n" + "On Fri, 2017-08-11 at 15:46 +0200, Philipp Zabel wrote:\n" "> Hi Eugeniy,\n" "> \n" - "> On Thu, 2017-08-10@19:41 +0300, Eugeniy Paltsev wrote:\n" + "> On Thu, 2017-08-10 at 19:41 +0300, Eugeniy Paltsev wrote:\n" "> > ARC AXS10x boards support custom IP-block which allows to control\n" "> > reset signals of selected peripherals. For example DW GMAC, etc...\n" "> > This block is controlled via memory-mapped register (AKA CREG)\n" @@ -17,9 +24,9 @@ "> > represents up-to 32 reset lines.\n" "> > \n" "> > As of today only the following lines are used:\n" - "> > ?- DW GMAC - line 5\n" + "> > \303\202\302\240- DW GMAC - line 5\n" "> > \n" - "> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>\n" + "> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>\n" "> \n" "> Could you check if the reset-simple driver that I posted today would\n" "> work for you?\n" @@ -27,6 +34,6 @@ "Yes, it would. Thanks.\n" "\n" "-- \n" - ?Eugeniy Paltsev + "\303\202\302\240Eugeniy PaltsevN\302\213\302\247\302\262\303\246\303\254r\302\270\302\233y\303\272\303\250\302\232\303\230b\302\262X\302\254\302\266\303\207\302\247v\303\230^\302\226)\303\236\302\272{.n\303\207+\302\211\302\267\302\235z\303\270\302\234z\303\232\303\236z)\303\255\302\205\303\246\303\250w*\037jg\302\254\302\261\302\250\036\302\266\302\211\302\232\302\216\302\212\303\235\302\242j.\303\257\303\233\302\260\\\302\275\302\275M\302\216\303\272gj\303\214\303\246a\303\227\002\302\233\302\233\302\226' \302\231\302\251\303\236\302\242\302\270\f\302\242\302\267\302\246j:+v\302\211\302\250\302\212w\303\250j\303\230m\302\266\302\237\303\277\302\276\a\302\253\302\221\303\252\303\247zZ+\302\203\303\271\302\232\302\216\302\212\303\235\302\242j\"\302\235\303\272!\302\266i" -695f021e63fd8cf5ee1dd022c4597f80f733155f3c0df90ec491825a9c0611b0 +08816825e3d3e7a712a49044a031468ac9ac6fba22a5093bf3aa137e88f24e90
diff --git a/a/1.txt b/N2/1.txt index aa9e199..dfcee88 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -1,7 +1,7 @@ -On Fri, 2017-08-11@15:46 +0200, Philipp Zabel wrote: +On Fri, 2017-08-11 at 15:46 +0200, Philipp Zabel wrote: > Hi Eugeniy, > -> On Thu, 2017-08-10@19:41 +0300, Eugeniy Paltsev wrote: +> On Thu, 2017-08-10 at 19:41 +0300, Eugeniy Paltsev wrote: > > ARC AXS10x boards support custom IP-block which allows to control > > reset signals of selected peripherals. For example DW GMAC, etc... > > This block is controlled via memory-mapped register (AKA CREG) @@ -9,9 +9,9 @@ On Fri, 2017-08-11@15:46 +0200, Philipp Zabel wrote: > > represents up-to 32 reset lines. > > > > As of today only the following lines are used: -> > ?- DW GMAC - line 5 +> > - DW GMAC - line 5 > > -> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com> +> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> > > Could you check if the reset-simple driver that I posted today would > work for you? @@ -19,4 +19,4 @@ On Fri, 2017-08-11@15:46 +0200, Philipp Zabel wrote: Yes, it would. Thanks. -- -?Eugeniy Paltsev + Eugeniy Paltsev diff --git a/a/content_digest b/N2/content_digest index 877e545..8b46b46 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,15 +1,21 @@ "ref\020170810164112.9894-1-Eugeniy.Paltsev@synopsys.com\0" "ref\01502459172.2310.16.camel@pengutronix.de\0" - "From\0Eugeniy.Paltsev@synopsys.com (Eugeniy Paltsev)\0" - "Subject\0[PATCH] ARC: reset: introduce AXS10x reset driver\0" + "From\0Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>\0" + "Subject\0Re: [PATCH] ARC: reset: introduce AXS10x reset driver\0" "Date\0Mon, 14 Aug 2017 13:37:56 +0000\0" - "To\0linux-snps-arc@lists.infradead.org\0" + "To\0p.zabel@pengutronix.de <p.zabel@pengutronix.de>\0" + "Cc\0linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>" + mark.rutland@arm.com <mark.rutland@arm.com> + Eugeniy.Paltsev@synopsys.com <Eugeniy.Paltsev@synopsys.com> + robh+dt@kernel.org <robh+dt@kernel.org> + linux-snps-arc@lists.infradead.org <linux-snps-arc@lists.infradead.org> + " devicetree@vger.kernel.org <devicetree@vger.kernel.org>\0" "\00:1\0" "b\0" - "On Fri, 2017-08-11@15:46 +0200, Philipp Zabel wrote:\n" + "On Fri, 2017-08-11 at 15:46 +0200, Philipp Zabel wrote:\n" "> Hi Eugeniy,\n" "> \n" - "> On Thu, 2017-08-10@19:41 +0300, Eugeniy Paltsev wrote:\n" + "> On Thu, 2017-08-10 at 19:41 +0300, Eugeniy Paltsev wrote:\n" "> > ARC AXS10x boards support custom IP-block which allows to control\n" "> > reset signals of selected peripherals. For example DW GMAC, etc...\n" "> > This block is controlled via memory-mapped register (AKA CREG)\n" @@ -17,9 +23,9 @@ "> > represents up-to 32 reset lines.\n" "> > \n" "> > As of today only the following lines are used:\n" - "> > ?- DW GMAC - line 5\n" + "> > \302\240- DW GMAC - line 5\n" "> > \n" - "> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>\n" + "> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>\n" "> \n" "> Could you check if the reset-simple driver that I posted today would\n" "> work for you?\n" @@ -27,6 +33,6 @@ "Yes, it would. Thanks.\n" "\n" "-- \n" - ?Eugeniy Paltsev + "\302\240Eugeniy Paltsev" -695f021e63fd8cf5ee1dd022c4597f80f733155f3c0df90ec491825a9c0611b0 +67de5d1c3b05c2210f70861d0f610835fef1cba513aedee80f1980f4ef03c74f
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.