All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
To: Lyude Paul <lyude@redhat.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH i-g-t 3/3] tests: Introduce audio tests, starting with HDMI signal integrity
Date: Mon, 21 Aug 2017 18:14:27 +0300	[thread overview]
Message-ID: <1503328467.1171.11.camel@linux.intel.com> (raw)
In-Reply-To: <1503072900.3702.2.camel@redhat.com>

Hi,

On Fri, 2017-08-18 at 12:15 -0400, Lyude Paul wrote:
> Nice job! Only one small formatting change

Thanks a lot for the timely review! I only have a week and a half left
at my internship, so it is much appreciated :)

> On Thu, 2017-08-17 at 19:05 +0300, Paul Kocialkowski wrote:
> > This introduces a new test for audio going through display
> > connectors.
> > It currently contains a single subtest for HDMI signal integrity,
> > but
> > other test cases will be added later on.
> > 
> > The test setup consists in using an HDMI-VGA bridge that separates
> > the
> > audio out (via a 3.5 mm jack) and feeding this back to the DUT's
> > line-in
> > where it can be recorded by ALSA with controls correctly configured.
> > 
> > The audio test makes use of the audio and ALSA igt libraries
> > helpers.
> > 
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
> > ---
> >  tests/Makefile.am |  12 ++++
> >  tests/audio.c     | 170
> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 182 insertions(+)
> >  create mode 100644 tests/audio.c
> > 
> > diff --git a/tests/Makefile.am b/tests/Makefile.am
> > index f9d11e6c..471f3818 100644
> > --- a/tests/Makefile.am
> > +++ b/tests/Makefile.am
> > @@ -20,6 +20,15 @@ TESTS_progs += \
> >  	$(NULL)
> >  endif
> >  
> > +if HAVE_ALSA
> > +if HAVE_GSL
> > +TESTS_progs += \
> > +	audio \
> > +	$(NULL)
> > +endif
> > +endif
> > +
> > +
> >  if BUILD_TESTS
> >  test-list.txt: Makefile.sources
> >  	@echo TESTLIST > $@
> > @@ -134,6 +143,9 @@ vc4_wait_seqno_LDADD = $(LDADD) $(DRM_VC4_LIBS)
> >  chamelium_CFLAGS = $(AM_CFLAGS) $(XMLRPC_CFLAGS) $(LIBUDEV_CFLAGS)
> >  chamelium_LDADD = $(LDADD) $(XMLRPC_LIBS) $(LIBUDEV_LIBS)
> >  
> > +audio_CFLAGS = $(AM_CFLAGS) $(ALSA_CFLAGS)
> > +audio_LDADD = $(LDADD) $(ALSA_LIBS)
> > +
> >  amdgpu_amd_basic_CFLAGS = $(AM_CFLAGS) $(DRM_AMDGPU_CFLAGS)
> >  amdgpu_amd_basic_LDADD = $(LDADD) $(DRM_AMDGPU_LIBS)
> >  amdgpu_amd_cs_nop_CFLAGS = $(AM_CFLAGS) $(DRM_AMDGPU_CFLAGS)
> > diff --git a/tests/audio.c b/tests/audio.c
> > new file mode 100644
> > index 00000000..7099dd99
> > --- /dev/null
> > +++ b/tests/audio.c
> > @@ -0,0 +1,170 @@
> > +/*
> > + * Copyright © 2017 Intel Corporation
> > + *
> > + * Permission is hereby granted, free of charge, to any person
> > obtaining a
> > + * copy of this software and associated documentation files (the
> > "Software"),
> > + * to deal in the Software without restriction, including without
> > limitation
> > + * the rights to use, copy, modify, merge, publish, distribute,
> > sublicense,
> > + * and/or sell copies of the Software, and to permit persons to
> > whom
> > the
> > + * Software is furnished to do so, subject to the following
> > conditions:
> > + *
> > + * The above copyright notice and this permission notice (including
> > the next
> > + * paragraph) shall be included in all copies or substantial
> > portions of the
> > + * Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> > MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO
> > EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
> > DAMAGES
> > OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> > ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > OTHER DEALINGS
> > + * IN THE SOFTWARE.
> > + *
> > + * Authors:
> > + *  Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
> > + */
> > +
> > +#include "config.h"
> > +#include "igt.h"
> > +
> > +#define PLAYBACK_CHANNELS	2
> > +#define PLAYBACK_FRAMES		1024
> > +
> > +#define CAPTURE_SAMPLE_RATE	48000
> > +#define CAPTURE_CHANNELS	2
> > +#define CAPTURE_DEVICE_NAME	"default"
> > +#define CAPTURE_FRAMES		2048
> 
> Might want to fix the indenting here

cat, git and my editor show them aligned, so I think this is due to
patch formating+email.

> > +
> > +#define RUN_TIMEOUT		2000
> > +
> > +struct test_data {
> > +	struct alsa *alsa;
> > +	struct audio_signal *signal;
> > +
> > +	int streak;
> > +};
> > +
> > +static int sampling_rates[] = {
> > +	32000,
> > +	44100,
> > +	48000,
> > +	88200,
> > +	96000,
> > +	176400,
> > +	192000,
> > +};
> > +
> > +static int sampling_rates_count = sizeof(sampling_rates) /
> > sizeof(int);
> > +
> > +static int test_frequencies[] = {
> > +	300,
> > +	600,
> > +	1200,
> > +	80000,
> > +	10000,
> > +};
> > +
> > +static int test_frequencies_count = sizeof(test_frequencies) /
> > sizeof(int);
> > +
> > +static int output_callback(void *data, short *buffer, int frames)
> > +{
> > +	struct test_data *test_data = (struct test_data *) data;
> > +
> > +	audio_signal_fill(test_data->signal, buffer, frames);
> > +
> > +	return 0;
> > +}
> > +
> > +static int input_callback(void *data, short *buffer, int frames)
> > +{
> > +	struct test_data *test_data = (struct test_data *) data;
> > +	bool detect;
> > +
> > +	detect = audio_signal_detect(test_data->signal,
> > CAPTURE_CHANNELS,
> > +				     CAPTURE_SAMPLE_RATE, buffer,
> > frames);
> > +	if (detect)
> > +		test_data->streak++;
> > +	else
> > +		test_data->streak = 0;
> > +
> > +	/* A streak of 3 gives confidence that the signal is good.
> > */
> > +	if (test_data->streak == 3)
> > +		return 1;
> > +
> > +	return 0;
> > +}
> > +
> > +static void test_integrity(const char *device_name)
> > +{
> > +	struct test_data data;
> > +	int sampling_rate;
> > +	bool run = false;
> > +	bool test;
> > +	int i, j;
> > +	int ret;
> > +
> > +	data.alsa = alsa_init();
> > +	igt_assert(data.alsa);
> > +
> > +	ret = alsa_open_output(data.alsa, device_name);
> > +	igt_assert(ret >= 0);
> > +
> > +	ret = alsa_open_input(data.alsa, CAPTURE_DEVICE_NAME);
> > +	igt_assert(ret >= 0);
> > +
> > +	alsa_configure_input(data.alsa, CAPTURE_CHANNELS,
> > +			     CAPTURE_SAMPLE_RATE);
> > +
> > +	for (i = 0; i < sampling_rates_count; i++) {
> > +		sampling_rate = sampling_rates[i];
> > +
> > +		test = alsa_test_output_configuration(data.alsa,
> > +						      PLAYBACK_CHAN
> > N
> > ELS,
> > +						      sampling_rate
> > )
> > ;
> > +		if (!test)
> > +			continue;
> > +
> > +		igt_debug("Testing with sampling rate %d\n",
> > sampling_rate);
> > +
> > +		alsa_configure_output(data.alsa, PLAYBACK_CHANNELS,
> > +				       sampling_rate);
> > +
> > +		data.signal = audio_signal_init(PLAYBACK_CHANNELS,
> > +						sampling_rate);
> > +		igt_assert(data.signal);
> > +
> > +		for (j = 0; j < test_frequencies_count; j++)
> > +			audio_signal_add_frequency(data.signal,
> > +						   test_frequencies
> > [
> > j]);
> > +
> > +		audio_signal_synthesize(data.signal);
> > +
> > +		alsa_register_output_callback(data.alsa,
> > output_callback,
> > +					      &data,
> > PLAYBACK_FRAMES);
> > +		alsa_register_input_callback(data.alsa,
> > input_callback, &data,
> > +					     CAPTURE_FRAMES);
> > +
> > +		data.streak = 0;
> > +
> > +		ret = alsa_run(data.alsa, RUN_TIMEOUT);
> > +		igt_assert(ret > 0);
> > +
> > +		audio_signal_clean(data.signal);
> > +		free(data.signal);
> > +
> > +		run = true;
> > +	}
> > +
> > +	/* Make sure we tested at least one frequency */
> > +	igt_assert(run);
> > +
> > +	alsa_close_input(data.alsa);
> > +	alsa_close_output(data.alsa);
> > +	free(data.alsa);
> > +}
> > +
> > +igt_main
> > +{
> > +	igt_subtest("hdmi-integrity")
> > +		test_integrity("HDMI");
> > +}
-- 
Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo, Finland
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-08-21 15:14 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-17 16:05 [PATCH i-g-t 1/3] lib: Add audio library with dedicated helpers Paul Kocialkowski
2017-08-17 16:05 ` [PATCH i-g-t 2/3] lib: Add ALSA " Paul Kocialkowski
2017-08-18  9:46   ` Arkadiusz Hiler
2017-08-21  7:25     ` Arkadiusz Hiler
2017-08-21  9:39       ` Paul Kocialkowski
2017-08-21  9:45         ` Arkadiusz Hiler
2017-08-18 16:20   ` Lyude Paul
2017-08-21 15:11     ` Paul Kocialkowski
2017-08-17 16:05 ` [PATCH i-g-t 3/3] tests: Introduce audio tests, starting with HDMI signal integrity Paul Kocialkowski
2017-08-18 16:15   ` Lyude Paul
2017-08-21 15:14     ` Paul Kocialkowski [this message]
2017-08-21 15:26       ` Lyude Paul
2017-08-17 16:24 ` ✓ Fi.CI.BAT: success for series starting with [1/3] lib: Add audio library with dedicated helpers Patchwork
2017-08-18  9:59   ` Petri Latvala
2017-08-18 16:16 ` [PATCH i-g-t 1/3] " Lyude Paul
2017-08-21 15:27   ` Paul Kocialkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1503328467.1171.11.camel@linux.intel.com \
    --to=paul.kocialkowski@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lyude@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.