From: ben.hutchings@codethink.co.uk (Ben Hutchings)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 01/14] ARM: dts: r8a7743: initial SoC device tree
Date: Tue, 22 Aug 2017 19:07:33 +0100 [thread overview]
Message-ID: <1503425253.2047.148.camel@codethink.co.uk> (raw)
In-Reply-To: <1502185828-45443-2-git-send-email-biju.das@bp.renesas.com>
On Tue, 2017-08-08 at 10:50 +0100, Biju Das wrote:
> The initial r8A7743 SoC device tree including CPU0, GIC and timer.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
I compared this to the upstream version (commit
34e8d993a68ae459ad98c27afc07647e439deacc) and I roughly understand why
the clocks are described differently, but can you explain why there's no
soc node?
Ben.
> ---
> arch/arm/boot/dts/r8a7743.dtsi | 56 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 56 insertions(+)
> create mode 100644 arch/arm/boot/dts/r8a7743.dtsi
>
> diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
> new file mode 100644
> index 0000000..8575a2f
> --- /dev/null
> +++ b/arch/arm/boot/dts/r8a7743.dtsi
> @@ -0,0 +1,56 @@
> +/*
> + * Device Tree Source for the r8a7743 SoC
> + *
> + * Copyright (C) 2017 Renesas Electronics Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + compatible = "renesas,r8a7743";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a15";
> + reg = <0>;
> + clock-frequency = <1500000000>;
> + };
> + };
> +
> + gic: interrupt-controller at f1001000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0 0xf1001000 0 0x1000>,
> + <0 0xf1002000 0 0x1000>,
> + <0 0xf1004000 0 0x2000>,
> + <0 0xf1006000 0 0x2000>;
> + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_LOW)>,
> + <1 14 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_LOW)>,
> + <1 11 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_LOW)>,
> + <1 10 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
--
Ben Hutchings
Software Developer, Codethink Ltd.
next prev parent reply other threads:[~2017-08-22 18:07 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-08 9:50 [cip-dev] [PATCH 00/14] Add Device tree support for iWave G20D-Q7 board Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 01/14] ARM: dts: r8a7743: initial SoC device tree Biju Das
2017-08-22 18:07 ` Ben Hutchings [this message]
2017-08-23 7:36 ` Biju Das
2017-08-25 15:40 ` Ben Hutchings
2017-08-25 15:52 ` Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 02/14] ARM: shmobile: r8a7743: Add clock index macros for DT sources Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 03/14] clk: shmobile: Document r8a7743 CPG clock support Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 04/14] clk: shmobile: Document r8a7743 CPG DIV6 " Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 05/14] clk: shmobile: Document r8a7743 MSTP " Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 06/14] ARM: dts: r8a7743: Add clocks Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 07/14] ARM: dts: r8a7743: add SYS-DMAC support Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 08/14] ARM: dts: r8a7743: add [H]SCIF{A|B} support Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 09/14] ARM: dts: r8a7743: add Ether support Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 10/14] ARM: dts: r8a7743: add IRQC support Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 11/14] ARM: dts: iwg20m: Add iWave RZG1M Qseven SOM Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 12/14] ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1M Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 13/14] ARM: shmobile: defconfig: Enable r8a774[35] SoCs Biju Das
2017-08-08 9:50 ` [cip-dev] [PATCH 14/14] ARM: multi_v7_defconfig: " Biju Das
2017-08-08 10:18 ` [cip-dev] [PATCH 00/14] Add Device tree support for iWave G20D-Q7 board Chris Paterson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503425253.2047.148.camel@codethink.co.uk \
--to=ben.hutchings@codethink.co.uk \
--cc=cip-dev@lists.cip-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.