From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, Sathya Perla <sathya.perla@broadcom.com>
Subject: [PATCH net-next 10/11] bnxt_en: add TC flower offload flow_alloc/free FW cmds
Date: Mon, 28 Aug 2017 13:40:34 -0400 [thread overview]
Message-ID: <1503942035-24924-11-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1503942035-24924-1-git-send-email-michael.chan@broadcom.com>
From: Sathya Perla <sathya.perla@broadcom.com>
This patch adds the hwrm_cfa_flow_alloc/free() routines
that are needed to issue the FW cmds needed for TC flower offload.
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 141 ++++++++++++++++++++++++++-
1 file changed, 139 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
index a10df27..5fa0835 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
@@ -259,13 +259,150 @@ static int bnxt_tc_parse_flow(struct bnxt *bp,
static int bnxt_hwrm_cfa_flow_free(struct bnxt *bp, __le16 flow_handle)
{
- return 0;
+ struct hwrm_cfa_flow_free_input req = { 0 };
+ int rc;
+
+ bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_CFA_FLOW_FREE, -1, -1);
+ req.flow_handle = flow_handle;
+
+ rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+ if (rc)
+ netdev_info(bp->dev, "Error: %s: flow_handle=0x%x rc=%d",
+ __func__, flow_handle, rc);
+ return rc;
+}
+
+static int ipv6_mask_len(struct in6_addr *mask)
+{
+ int mask_len = 0, i;
+
+ for (i = 0; i < 4; i++)
+ mask_len += inet_mask_len(mask->s6_addr32[i]);
+
+ return mask_len;
+}
+
+static bool is_wildcard(void *mask, int len)
+{
+ const u8 *p = mask;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (p[i] != 0)
+ return false;
+ }
+ return true;
}
static int bnxt_hwrm_cfa_flow_alloc(struct bnxt *bp, struct bnxt_tc_flow *flow,
__le16 ref_flow_handle, __le16 *flow_handle)
{
- return 0;
+ struct hwrm_cfa_flow_alloc_output *resp = bp->hwrm_cmd_resp_addr;
+ struct bnxt_tc_actions *actions = &flow->actions;
+ struct bnxt_tc_l3_key *l3_mask = &flow->l3_mask;
+ struct bnxt_tc_l3_key *l3_key = &flow->l3_key;
+ struct hwrm_cfa_flow_alloc_input req = { 0 };
+ u16 flow_flags = 0, action_flags = 0;
+ int rc;
+
+ bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_CFA_FLOW_ALLOC, -1, -1);
+
+ req.src_fid = cpu_to_le16(flow->src_fid);
+ req.ref_flow_handle = ref_flow_handle;
+ req.ethertype = flow->l2_key.ether_type;
+ req.ip_proto = flow->l4_key.ip_proto;
+
+ if (flow->flags & BNXT_TC_FLOW_FLAGS_ETH_ADDRS) {
+ memcpy(req.dmac, flow->l2_key.dmac, ETH_ALEN);
+ memcpy(req.smac, flow->l2_key.smac, ETH_ALEN);
+ }
+
+ if (flow->l2_key.num_vlans > 0) {
+ flow_flags |= CFA_FLOW_ALLOC_REQ_FLAGS_NUM_VLAN_ONE;
+ /* FW expects the inner_vlan_tci value to be set
+ * in outer_vlan_tci when num_vlans is 1 (which is
+ * always the case in TC.)
+ */
+ req.outer_vlan_tci = flow->l2_key.inner_vlan_tci;
+ }
+
+ /* If all IP and L4 fields are wildcarded then this is an L2 flow */
+ if (is_wildcard(&l3_mask, sizeof(l3_mask)) &&
+ is_wildcard(&flow->l4_mask, sizeof(flow->l4_mask))) {
+ flow_flags |= CFA_FLOW_ALLOC_REQ_FLAGS_FLOWTYPE_L2;
+ } else {
+ flow_flags |= flow->l2_key.ether_type == htons(ETH_P_IP) ?
+ CFA_FLOW_ALLOC_REQ_FLAGS_FLOWTYPE_IPV4 :
+ CFA_FLOW_ALLOC_REQ_FLAGS_FLOWTYPE_IPV6;
+
+ if (flow->flags & BNXT_TC_FLOW_FLAGS_IPV4_ADDRS) {
+ req.ip_dst[0] = l3_key->ipv4.daddr.s_addr;
+ req.ip_dst_mask_len =
+ inet_mask_len(l3_mask->ipv4.daddr.s_addr);
+ req.ip_src[0] = l3_key->ipv4.saddr.s_addr;
+ req.ip_src_mask_len =
+ inet_mask_len(l3_mask->ipv4.saddr.s_addr);
+ } else if (flow->flags & BNXT_TC_FLOW_FLAGS_IPV6_ADDRS) {
+ memcpy(req.ip_dst, l3_key->ipv6.daddr.s6_addr32,
+ sizeof(req.ip_dst));
+ req.ip_dst_mask_len =
+ ipv6_mask_len(&l3_mask->ipv6.daddr);
+ memcpy(req.ip_src, l3_key->ipv6.saddr.s6_addr32,
+ sizeof(req.ip_src));
+ req.ip_src_mask_len =
+ ipv6_mask_len(&l3_mask->ipv6.saddr);
+ }
+ }
+
+ if (flow->flags & BNXT_TC_FLOW_FLAGS_PORTS) {
+ req.l4_src_port = flow->l4_key.ports.sport;
+ req.l4_src_port_mask = flow->l4_mask.ports.sport;
+ req.l4_dst_port = flow->l4_key.ports.dport;
+ req.l4_dst_port_mask = flow->l4_mask.ports.dport;
+ } else if (flow->flags & BNXT_TC_FLOW_FLAGS_ICMP) {
+ /* l4 ports serve as type/code when ip_proto is ICMP */
+ req.l4_src_port = htons(flow->l4_key.icmp.type);
+ req.l4_src_port_mask = htons(flow->l4_mask.icmp.type);
+ req.l4_dst_port = htons(flow->l4_key.icmp.code);
+ req.l4_dst_port_mask = htons(flow->l4_mask.icmp.code);
+ }
+ req.flags = cpu_to_le16(flow_flags);
+
+ if (actions->flags & BNXT_TC_ACTION_FLAG_DROP) {
+ action_flags |= CFA_FLOW_ALLOC_REQ_ACTION_FLAGS_DROP;
+ } else {
+ if (actions->flags & BNXT_TC_ACTION_FLAG_FWD) {
+ action_flags |= CFA_FLOW_ALLOC_REQ_ACTION_FLAGS_FWD;
+ req.dst_fid = cpu_to_le16(actions->dst_fid);
+ }
+ if (actions->flags & BNXT_TC_ACTION_FLAG_PUSH_VLAN) {
+ action_flags |=
+ CFA_FLOW_ALLOC_REQ_ACTION_FLAGS_L2_HEADER_REWRITE;
+ req.l2_rewrite_vlan_tpid = actions->push_vlan_tpid;
+ req.l2_rewrite_vlan_tci = actions->push_vlan_tci;
+ memcpy(&req.l2_rewrite_dmac, &req.dmac, ETH_ALEN);
+ memcpy(&req.l2_rewrite_smac, &req.smac, ETH_ALEN);
+ }
+ if (actions->flags & BNXT_TC_ACTION_FLAG_POP_VLAN) {
+ action_flags |=
+ CFA_FLOW_ALLOC_REQ_ACTION_FLAGS_L2_HEADER_REWRITE;
+ /* Rewrite config with tpid = 0 implies vlan pop */
+ req.l2_rewrite_vlan_tpid = 0;
+ memcpy(&req.l2_rewrite_dmac, &req.dmac, ETH_ALEN);
+ memcpy(&req.l2_rewrite_smac, &req.smac, ETH_ALEN);
+ }
+ }
+ req.action_flags = cpu_to_le16(action_flags);
+
+ mutex_lock(&bp->hwrm_cmd_lock);
+
+ rc = _hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+ if (!rc)
+ *flow_handle = resp->flow_handle;
+
+ mutex_unlock(&bp->hwrm_cmd_lock);
+
+ return rc;
}
static int bnxt_tc_put_l2_node(struct bnxt *bp,
--
1.8.3.1
next prev parent reply other threads:[~2017-08-28 17:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-28 17:40 [PATCH net-next 00/11] bnxt_en: Updates Michael Chan
2017-08-28 17:40 ` [PATCH net-next 01/11] bnxt_en: Update firmware interface spec. to 1.8.1.4 Michael Chan
2017-08-28 17:40 ` [PATCH net-next 02/11] bnxt_en: Improve tx ring reservation logic Michael Chan
2017-08-28 17:40 ` [PATCH net-next 03/11] bnxt_en: assign CPU affinity hints to bnxt_en IRQs Michael Chan
2017-08-28 17:40 ` [PATCH net-next 04/11] bnxt: Add PCIe device IDs for bcm58802/bcm58808 Michael Chan
2017-08-28 17:40 ` [PATCH net-next 05/11] bnxt: initialize board_info values with proper enums Michael Chan
2017-08-28 17:40 ` [PATCH net-next 06/11] bnxt_en: Improve -ENOMEM logic in NAPI poll loop Michael Chan
2017-08-28 19:05 ` Martin KaFai Lau
2017-08-28 17:40 ` [PATCH net-next 07/11] bnxt_en: Reduce default rings on multi-port cards Michael Chan
2017-08-28 17:40 ` [PATCH net-next 08/11] bnxt_en: fix clearing devlink ptr from bnxt struct Michael Chan
2017-08-28 17:40 ` [PATCH net-next 09/11] bnxt_en: bnxt: add TC flower filter offload support Michael Chan
2017-09-11 13:36 ` Jiri Pirko
[not found] ` <CAKvpyk1iV4z_f7cUA8DL1nU772hPtiZC4MtjA9t=S5J=8EcD-A@mail.gmail.com>
2017-09-18 9:52 ` Jiri Pirko
2017-08-28 17:40 ` Michael Chan [this message]
2017-08-28 17:40 ` [PATCH net-next 11/11] bnxt_en: add code to query TC flower offload stats Michael Chan
2017-08-28 23:57 ` [PATCH net-next 00/11] bnxt_en: Updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503942035-24924-11-git-send-email-michael.chan@broadcom.com \
--to=michael.chan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=sathya.perla@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.