diff for duplicates of <1504195599.1918.17.camel@googlemail.com> diff --git a/a/1.txt b/N1/1.txt index 0a152f3..f65e9c5 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,6 +1,6 @@ Add initial imx6sx-softing-vining-2000 board support. -Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> +Signed-off-by: Christoph Fritz <chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6sx-softing-vining-2000.dts | 575 +++++++++++++++++++++++ @@ -56,7 +56,7 @@ index 0000000..3db15f7 + #address-cells = <1>; + #size-cells = <0>; + -+ reg_usb_otg1_vbus: regulator at 0 { ++ reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; @@ -68,7 +68,7 @@ index 0000000..3db15f7 + enable-active-high; + }; + -+ reg_peri_3v3: regulator at 1 { ++ reg_peri_3v3: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "peri_3v3"; @@ -114,7 +114,7 @@ index 0000000..3db15f7 + #address-cells = <1>; + #size-cells = <0>; + -+ ethphy0: ethernet0-phy at 0 { ++ ethphy0: ethernet0-phy@0 { + reg = <0>; + max-speed = <100>; + interrupts-parent = <&gpio2>; @@ -137,7 +137,7 @@ index 0000000..3db15f7 + #address-cells = <1>; + #size-cells = <0>; + -+ ethphy1: ethernet1-phy at 0 { ++ ethphy1: ethernet1-phy@0 { + reg = <0>; + max-speed = <100>; + interrupts-parent = <&gpio2>; @@ -474,7 +474,7 @@ index 0000000..3db15f7 + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + -+ proximity: sx9500 at 28 { ++ proximity: sx9500@28 { + compatible = "semtech,sx9500"; + reg = <0x28>; + pinctrl-names = "default"; @@ -484,7 +484,7 @@ index 0000000..3db15f7 + reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + }; + -+ pmic: pfuze100 at 08 { ++ pmic: pfuze100@08 { + compatible = "fsl,pfuze200"; + reg = <0x08>; + @@ -602,3 +602,8 @@ index 0000000..3db15f7 +}; -- 2.1.4 + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 96d8236..2d87e99 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,12 +1,17 @@ - "From\0chf.fritz@googlemail.com (Christoph Fritz)\0" + "From\0Christoph Fritz <chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>\0" "Subject\0[PATCH] ARM: dts: imx6sx: add vining-2000 board support\0" "Date\0Thu, 31 Aug 2017 18:06:39 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>" + Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> + " Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>\0" + "Cc\0devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>" + linux-arm-kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> + " open-source <open-source-MNoX7ImGUMaELgA04lAiVw@public.gmane.org>\0" "\00:1\0" "b\0" "Add initial imx6sx-softing-vining-2000 board support.\n" "\n" - "Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>\n" + "Signed-off-by: Christoph Fritz <chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>\n" "---\n" " arch/arm/boot/dts/Makefile | 1 +\n" " arch/arm/boot/dts/imx6sx-softing-vining-2000.dts | 575 +++++++++++++++++++++++\n" @@ -62,7 +67,7 @@ "+\t\t#address-cells = <1>;\n" "+\t\t#size-cells = <0>;\n" "+\n" - "+\t\treg_usb_otg1_vbus: regulator at 0 {\n" + "+\t\treg_usb_otg1_vbus: regulator@0 {\n" "+\t\t\tcompatible = \"regulator-fixed\";\n" "+\t\t\treg = <0>;\n" "+\t\t\tpinctrl-names = \"default\";\n" @@ -74,7 +79,7 @@ "+\t\t\tenable-active-high;\n" "+\t\t};\n" "+\n" - "+\t\treg_peri_3v3: regulator at 1 {\n" + "+\t\treg_peri_3v3: regulator@1 {\n" "+\t\t\tcompatible = \"regulator-fixed\";\n" "+\t\t\treg = <1>;\n" "+\t\t\tregulator-name = \"peri_3v3\";\n" @@ -120,7 +125,7 @@ "+\t\t#address-cells = <1>;\n" "+\t\t#size-cells = <0>;\n" "+\n" - "+\t\tethphy0: ethernet0-phy at 0 {\n" + "+\t\tethphy0: ethernet0-phy@0 {\n" "+\t\t\treg = <0>;\n" "+\t\t\tmax-speed = <100>;\n" "+\t\t\tinterrupts-parent = <&gpio2>;\n" @@ -143,7 +148,7 @@ "+\t\t#address-cells = <1>;\n" "+\t\t#size-cells = <0>;\n" "+\n" - "+\t\tethphy1: ethernet1-phy at 0 {\n" + "+\t\tethphy1: ethernet1-phy@0 {\n" "+\t\t\treg = <0>;\n" "+\t\t\tmax-speed = <100>;\n" "+\t\t\tinterrupts-parent = <&gpio2>;\n" @@ -480,7 +485,7 @@ "+\tpinctrl-0 = <&pinctrl_i2c1>;\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tproximity: sx9500 at 28 {\n" + "+\tproximity: sx9500@28 {\n" "+\t\tcompatible = \"semtech,sx9500\";\n" "+\t\treg = <0x28>;\n" "+\t\tpinctrl-names = \"default\";\n" @@ -490,7 +495,7 @@ "+\t\treset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;\n" "+\t};\n" "+\n" - "+\tpmic: pfuze100 at 08 {\n" + "+\tpmic: pfuze100@08 {\n" "+\t\tcompatible = \"fsl,pfuze200\";\n" "+\t\treg = <0x08>;\n" "+\n" @@ -607,6 +612,11 @@ "+\tstatus = \"okay\";\n" "+};\n" "-- \n" - 2.1.4 + "2.1.4\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -10e85614401da2614e8db272acc3a6351977425665a34ea666a9f8c0f9c349de +17c82870e1675de8707305dedc3ba4f2a6b202fee0befa6b430491af82cabd0a
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.