diff for duplicates of <1504283401-4263-2-git-send-email-embed3d@gmail.com> diff --git a/a/1.txt b/N1/1.txt index 010eb2c..5759319 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,4 +1,4 @@ -From: Philipp Rossak <embed3d@gmail.com> +From: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> The WiFi side of the AP6212 WiFi/BT combo module is connected to mmc1. There are also GPIOs for enable and interrupts. @@ -6,7 +6,7 @@ mmc1. There are also GPIOs for enable and interrupts. Enable WiFi on this board by enabling mmc1 and adding the power sequencing clocks and GPIO, as well as the chip's interrupt line. -Signed-off-by: Philipp Rossak <embed3d@gmail.com> +Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) @@ -42,7 +42,7 @@ index 6256f55..7d18c35 100644 + non-removable; + status = "okay"; + -+ sdio_wifi: sdio_wifi at 1 { ++ sdio_wifi: sdio_wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; diff --git a/a/content_digest b/N1/content_digest index 65fda66..7774a36 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,11 +1,21 @@ "ref\01504283401-4263-1-git-send-email-embed3d@gmail.com\0" - "From\0embed3d@gmail.com (Philipp Rossak)\0" + "ref\01504283401-4263-1-git-send-email-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "From\0Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" "Subject\0[PATCH v2 1/2] ARM: dts: sun8i: h3: Enable AP6212 WiFi on mmc1 on Nanopi M1 Plus\0" "Date\0Fri, 1 Sep 2017 18:30:00 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org" + mark.rutland-5wv7dgnIgG8@public.gmane.org + linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org + maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org + " wens-jdAy2FN1RRM@public.gmane.org\0" + "Cc\0Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>" + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org\0" "\00:1\0" "b\0" - "From: Philipp Rossak <embed3d@gmail.com>\n" + "From: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "\n" "The WiFi side of the AP6212 WiFi/BT combo module is connected to\n" "mmc1. There are also GPIOs for enable and interrupts.\n" @@ -13,7 +23,7 @@ "Enable WiFi on this board by enabling mmc1 and adding the power\n" "sequencing clocks and GPIO, as well as the chip's interrupt line.\n" "\n" - "Signed-off-by: Philipp Rossak <embed3d@gmail.com>\n" + "Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "---\n" " arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25 +++++++++++++++++++++++++\n" " 1 file changed, 25 insertions(+)\n" @@ -49,7 +59,7 @@ "+\tnon-removable;\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tsdio_wifi: sdio_wifi at 1 {\n" + "+\tsdio_wifi: sdio_wifi@1 {\n" "+\t\treg = <1>;\n" "+\t\tcompatible = \"brcm,bcm4329-fmac\";\n" "+\t\tinterrupt-parent = <&pio>;\n" @@ -64,4 +74,4 @@ "-- \n" 2.7.4 -35528e08f4f5affd008266a01a90c2fc7e1140fb97be84b7c4f2990b7343dd52 +f5adf6491497bfed263c146ceb864c0a7a14bded4acab575bc953e1dece89e55
diff --git a/a/1.txt b/N2/1.txt index 010eb2c..c0c8f46 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -42,7 +42,7 @@ index 6256f55..7d18c35 100644 + non-removable; + status = "okay"; + -+ sdio_wifi: sdio_wifi at 1 { ++ sdio_wifi: sdio_wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; diff --git a/a/content_digest b/N2/content_digest index 65fda66..15a0446 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,8 +1,17 @@ "ref\01504283401-4263-1-git-send-email-embed3d@gmail.com\0" - "From\0embed3d@gmail.com (Philipp Rossak)\0" + "From\0Philipp Rossak <embed3d@gmail.com>\0" "Subject\0[PATCH v2 1/2] ARM: dts: sun8i: h3: Enable AP6212 WiFi on mmc1 on Nanopi M1 Plus\0" "Date\0Fri, 1 Sep 2017 18:30:00 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0robh+dt@kernel.org" + mark.rutland@arm.com + linux@armlinux.org.uk + maxime.ripard@free-electrons.com + " wens@csie.org\0" + "Cc\0Philipp Rossak <embed3d@gmail.com>" + devicetree@vger.kernel.org + linux-arm-kernel@lists.infradead.org + linux-kernel@vger.kernel.org + " linux-sunxi@googlegroups.com\0" "\00:1\0" "b\0" "From: Philipp Rossak <embed3d@gmail.com>\n" @@ -49,7 +58,7 @@ "+\tnon-removable;\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tsdio_wifi: sdio_wifi at 1 {\n" + "+\tsdio_wifi: sdio_wifi@1 {\n" "+\t\treg = <1>;\n" "+\t\tcompatible = \"brcm,bcm4329-fmac\";\n" "+\t\tinterrupt-parent = <&pio>;\n" @@ -64,4 +73,4 @@ "-- \n" 2.7.4 -35528e08f4f5affd008266a01a90c2fc7e1140fb97be84b7c4f2990b7343dd52 +a06f03b42f2213abd14fa382db58eb8cfb537a019018a87011cb826e445466d1
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.