Re: [PATCH kernel] powerpc/powernv: Update comment about shifting IOV BAR

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

On Thu, 2017-09-14 at 09:27 +0000, David Laight wrote:
> You can logically 'hotplug' PCI(e) on any system [1].
> 
> The 'problem' is that whatever enumerates the PCI(e) at system
> powerup doesn't normally assign extra resources to bridges to allow
> for devices that aren't present at boot time.
> So you can normally only replace cards with ones that use the same
> (or less) resources, or that are not behind any bridges.
> This is problematic if you have a docking station connected via
> a bridge.

There's also the problem of Max Payload Size. If you can hotplug behind
a bridge then the standard algorithm of finding the max of all devices
behind a host bridge doesn't work anymore and you have to clamp
everybody to 128 bytes.

> [1] Apart from some annoying x86 Dell servers we have which generate
> an NMI when the PCIe link goes down (when we reprogram the fpga).
> They also fail to boot if a link doesn't come up...
> 
>         David