All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc <linux-mmc@vger.kernel.org>
Subject: [PATCH V9 14/14] mmc: sdhci-pci: Add CQHCI support for Intel GLK
Date: Mon, 18 Sep 2017 15:19:05 +0300	[thread overview]
Message-ID: <1505737145-19067-1-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1505302814-19313-15-git-send-email-adrian.hunter@intel.com>

Add CQHCI initialization and implement CQHCI operations for Intel GLK.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---


Changes since V8:

Re-base on top of patch "mmc: sdhci-pci: Fix voltage switch for some Intel host controllers"


 drivers/mmc/host/Kconfig          |   1 +
 drivers/mmc/host/sdhci-pci-core.c | 155 +++++++++++++++++++++++++++++++++++++-
 2 files changed, 155 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 6db8e46b4e12..23621c52d2f8 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -81,6 +81,7 @@ config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
 config MMC_SDHCI_PCI
 	tristate "SDHCI support on PCI bus"
 	depends on MMC_SDHCI && PCI
+	select MMC_CQHCI
 	help
 	  This selects the PCI Secure Digital Host Controller Interface.
 	  Most controllers found today are PCI devices.
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 5f3f7b51299f..36fc5c2226a1 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -30,6 +30,8 @@
 #include <linux/mmc/sdhci-pci-data.h>
 #include <linux/acpi.h>
 
+#include "cqhci.h"
+
 #include "sdhci.h"
 #include "sdhci-pci.h"
 #include "sdhci-pci-o2micro.h"
@@ -117,6 +119,28 @@ int sdhci_pci_resume_host(struct sdhci_pci_chip *chip)
 
 	return 0;
 }
+
+static int sdhci_cqhci_suspend(struct sdhci_pci_chip *chip)
+{
+	int ret;
+
+	ret = cqhci_suspend(chip->slots[0]->host->mmc);
+	if (ret)
+		return ret;
+
+	return sdhci_pci_suspend_host(chip);
+}
+
+static int sdhci_cqhci_resume(struct sdhci_pci_chip *chip)
+{
+	int ret;
+
+	ret = sdhci_pci_resume_host(chip);
+	if (ret)
+		return ret;
+
+	return cqhci_resume(chip->slots[0]->host->mmc);
+}
 #endif
 
 #ifdef CONFIG_PM
@@ -167,8 +191,48 @@ static int sdhci_pci_runtime_resume_host(struct sdhci_pci_chip *chip)
 
 	return 0;
 }
+
+static int sdhci_cqhci_runtime_suspend(struct sdhci_pci_chip *chip)
+{
+	int ret;
+
+	ret = cqhci_suspend(chip->slots[0]->host->mmc);
+	if (ret)
+		return ret;
+
+	return sdhci_pci_runtime_suspend_host(chip);
+}
+
+static int sdhci_cqhci_runtime_resume(struct sdhci_pci_chip *chip)
+{
+	int ret;
+
+	ret = sdhci_pci_runtime_resume_host(chip);
+	if (ret)
+		return ret;
+
+	return cqhci_resume(chip->slots[0]->host->mmc);
+}
 #endif
 
+static u32 sdhci_cqhci_irq(struct sdhci_host *host, u32 intmask)
+{
+	int cmd_error = 0;
+	int data_error = 0;
+
+	if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
+		return intmask;
+
+	cqhci_irq(host->mmc, intmask, cmd_error, data_error);
+
+	return 0;
+}
+
+static void sdhci_pci_dumpregs(struct mmc_host *mmc)
+{
+	sdhci_dumpregs(mmc_priv(mmc));
+}
+
 /*****************************************************************************\
  *                                                                           *
  * Hardware specific quirk handling                                          *
@@ -582,6 +646,18 @@ static void sdhci_intel_voltage_switch(struct sdhci_host *host)
 	.voltage_switch		= sdhci_intel_voltage_switch,
 };
 
+static const struct sdhci_ops sdhci_intel_glk_ops = {
+	.set_clock		= sdhci_set_clock,
+	.set_power		= sdhci_intel_set_power,
+	.enable_dma		= sdhci_pci_enable_dma,
+	.set_bus_width		= sdhci_set_bus_width,
+	.reset			= sdhci_reset,
+	.set_uhs_signaling	= sdhci_set_uhs_signaling,
+	.hw_reset		= sdhci_pci_hw_reset,
+	.voltage_switch		= sdhci_intel_voltage_switch,
+	.irq			= sdhci_cqhci_irq,
+};
+
 static void byt_read_dsm(struct sdhci_pci_slot *slot)
 {
 	struct intel_host *intel_host = sdhci_pci_priv(slot);
@@ -611,12 +687,80 @@ static int glk_emmc_probe_slot(struct sdhci_pci_slot *slot)
 {
 	int ret = byt_emmc_probe_slot(slot);
 
+	slot->host->mmc->caps2 |= MMC_CAP2_CQE;
+
 	if (slot->chip->pdev->device != PCI_DEVICE_ID_INTEL_GLK_EMMC) {
 		slot->host->mmc->caps2 |= MMC_CAP2_HS400_ES,
 		slot->host->mmc_host_ops.hs400_enhanced_strobe =
 						intel_hs400_enhanced_strobe;
+		slot->host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
+	}
+
+	return ret;
+}
+
+static void glk_cqe_enable(struct mmc_host *mmc)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	u32 reg;
+
+	/*
+	 * CQE gets stuck if it sees Buffer Read Enable bit set, which can be
+	 * the case after tuning, so ensure the buffer is drained.
+	 */
+	reg = sdhci_readl(host, SDHCI_PRESENT_STATE);
+	while (reg & SDHCI_DATA_AVAILABLE) {
+		sdhci_readl(host, SDHCI_BUFFER);
+		reg = sdhci_readl(host, SDHCI_PRESENT_STATE);
+	}
+
+	sdhci_cqe_enable(mmc);
+}
+
+static const struct cqhci_host_ops glk_cqhci_ops = {
+	.enable		= glk_cqe_enable,
+	.disable	= sdhci_cqe_disable,
+	.dumpregs	= sdhci_pci_dumpregs,
+};
+
+static int glk_emmc_add_host(struct sdhci_pci_slot *slot)
+{
+	struct device *dev = &slot->chip->pdev->dev;
+	struct sdhci_host *host = slot->host;
+	struct cqhci_host *cq_host;
+	bool dma64;
+	int ret;
+
+	ret = sdhci_setup_host(host);
+	if (ret)
+		return ret;
+
+	cq_host = devm_kzalloc(dev, sizeof(*cq_host), GFP_KERNEL);
+	if (!cq_host) {
+		ret = -ENOMEM;
+		goto cleanup;
 	}
 
+	cq_host->mmio = host->ioaddr + 0x200;
+	cq_host->quirks |= CQHCI_QUIRK_SHORT_TXFR_DESC_SZ;
+	cq_host->ops = &glk_cqhci_ops;
+
+	dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
+	if (dma64)
+		cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+
+	ret = cqhci_init(cq_host, host->mmc, dma64);
+	if (ret)
+		goto cleanup;
+
+	ret = __sdhci_add_host(host);
+	if (ret)
+		goto cleanup;
+
+	return 0;
+
+cleanup:
+	sdhci_cleanup_host(host);
 	return ret;
 }
 
@@ -698,11 +842,20 @@ static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
 static const struct sdhci_pci_fixes sdhci_intel_glk_emmc = {
 	.allow_runtime_pm	= true,
 	.probe_slot		= glk_emmc_probe_slot,
+	.add_host		= glk_emmc_add_host,
+#ifdef CONFIG_PM_SLEEP
+	.suspend		= sdhci_cqhci_suspend,
+	.resume			= sdhci_cqhci_resume,
+#endif
+#ifdef CONFIG_PM
+	.runtime_suspend	= sdhci_cqhci_runtime_suspend,
+	.runtime_resume		= sdhci_cqhci_runtime_resume,
+#endif
 	.quirks			= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.quirks2		= SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
 				  SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 |
 				  SDHCI_QUIRK2_STOP_WITH_TC,
-	.ops			= &sdhci_intel_byt_ops,
+	.ops			= &sdhci_intel_glk_ops,
 	.priv_size		= sizeof(struct intel_host),
 };
 
-- 
1.9.1


  reply	other threads:[~2017-09-18 12:25 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-13 11:40 [PATCH V8 00/14] mmc: Add Command Queue support Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 01/14] mmc: core: Introduce host claiming by context Adrian Hunter
2017-09-20  9:00   ` Ulf Hansson
2017-09-22 11:23   ` Linus Walleij
2017-09-13 11:40 ` [PATCH V8 02/14] mmc: core: Add support for handling CQE requests Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 03/14] mmc: mmc: Enable Command Queuing Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 04/14] mmc: mmc: Enable CQE's Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 05/14] mmc: block: Use local variables in mmc_blk_data_prep() Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 06/14] mmc: block: Prepare CQE data Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 07/14] mmc: block: Factor out mmc_setup_queue() Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 08/14] mmc: core: Add parameter use_blk_mq Adrian Hunter
2017-09-21  9:47   ` Ulf Hansson
2017-09-22 13:30     ` Adrian Hunter
2017-09-22 14:01       ` Linus Walleij
2017-09-13 11:40 ` [PATCH V8 09/14] mmc: core: Remove unnecessary host claim Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 10/14] mmc: core: Export mmc_start_bkops() Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 11/14] mmc: core: Export mmc_start_request() Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 12/14] mmc: block: Add CQE and blk-mq support Adrian Hunter
2017-09-21  9:59   ` Ulf Hansson
2017-09-21 11:17     ` Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 13/14] mmc: cqhci: support for command queue enabled host Adrian Hunter
2017-09-13 11:40 ` [PATCH V8 14/14] mmc: sdhci-pci: Add CQHCI support for Intel GLK Adrian Hunter
2017-09-18 12:19   ` Adrian Hunter [this message]
2017-09-21  9:01 ` [PATCH V8 00/14] mmc: Add Command Queue support Ulf Hansson
2017-09-21  9:44   ` Adrian Hunter
2017-10-10 12:12     ` Ulf Hansson
2017-10-10 12:24       ` Adrian Hunter
2017-10-10 13:08         ` Ulf Hansson
2017-10-10 13:31           ` Adrian Hunter
2017-10-11 12:13             ` Ulf Hansson
2017-10-11 12:58               ` Adrian Hunter
2017-10-11 13:58                 ` Ulf Hansson
2017-10-12  8:08                   ` Linus Walleij
2017-10-12  8:28                     ` Ulf Hansson
2017-10-13 11:58                   ` Adrian Hunter
2017-10-18  6:16                   ` Adrian Hunter
2017-10-19 11:44                     ` Adrian Hunter
2017-10-20 12:30                       ` Adrian Hunter
2017-10-23 13:06                         ` Adrian Hunter
2017-10-24  5:37                           ` Ulf Hansson
2017-10-24  6:42                             ` Adrian Hunter
2017-10-24  7:39                               ` Ulf Hansson
2017-10-24  9:11                                 ` Adrian Hunter
2017-09-21 14:07 ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1505737145-19067-1-git-send-email-adrian.hunter@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.