All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: drake@endlessm.com, gregkh@linuxfoundation.org, linus.walleij@linaro.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "pinctrl/amd: save pin registers over suspend/resume" has been added to the 4.9-stable tree
Date: Thu, 21 Sep 2017 13:01:34 +0200	[thread overview]
Message-ID: <1505991694252156@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    pinctrl/amd: save pin registers over suspend/resume

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     pinctrl-amd-save-pin-registers-over-suspend-resume.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 79d2c8bede2c93f9432d7da0bc2f76a195c90fc0 Mon Sep 17 00:00:00 2001
From: Daniel Drake <drake@endlessm.com>
Date: Mon, 11 Sep 2017 14:11:56 +0800
Subject: pinctrl/amd: save pin registers over suspend/resume

From: Daniel Drake <drake@endlessm.com>

commit 79d2c8bede2c93f9432d7da0bc2f76a195c90fc0 upstream.

The touchpad in the Asus laptop models X505BA/BP and X542BA/BP is
unresponsive after suspend/resume. The following error appears during
resume:

  i2c_hid i2c-ELAN1300:00: failed to reset device.

The problem here is that i2c_hid does not notice the interrupt being
generated at this point, because the GPIO is no longer configured
for interrupts.

Fix this by saving pinctrl-amd pin registers during suspend and
restoring them at resume time.

Based on code from pinctrl-intel.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/pinctrl-amd.c |   75 ++++++++++++++++++++++++++++++++++++++++++
 drivers/pinctrl/pinctrl-amd.h |    1 
 2 files changed, 76 insertions(+)

--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -32,6 +32,7 @@
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
 
+#include "core.h"
 #include "pinctrl-utils.h"
 #include "pinctrl-amd.h"
 
@@ -712,6 +713,69 @@ static const struct pinconf_ops amd_pinc
 	.pin_config_group_set = amd_pinconf_group_set,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static bool amd_gpio_should_save(struct amd_gpio *gpio_dev, unsigned int pin)
+{
+	const struct pin_desc *pd = pin_desc_get(gpio_dev->pctrl, pin);
+
+	if (!pd)
+		return false;
+
+	/*
+	 * Only restore the pin if it is actually in use by the kernel (or
+	 * by userspace).
+	 */
+	if (pd->mux_owner || pd->gpio_owner ||
+	    gpiochip_line_is_irq(&gpio_dev->gc, pin))
+		return true;
+
+	return false;
+}
+
+int amd_gpio_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct amd_gpio *gpio_dev = platform_get_drvdata(pdev);
+	struct pinctrl_desc *desc = gpio_dev->pctrl->desc;
+	int i;
+
+	for (i = 0; i < desc->npins; i++) {
+		int pin = desc->pins[i].number;
+
+		if (!amd_gpio_should_save(gpio_dev, pin))
+			continue;
+
+		gpio_dev->saved_regs[i] = readl(gpio_dev->base + pin*4);
+	}
+
+	return 0;
+}
+
+int amd_gpio_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct amd_gpio *gpio_dev = platform_get_drvdata(pdev);
+	struct pinctrl_desc *desc = gpio_dev->pctrl->desc;
+	int i;
+
+	for (i = 0; i < desc->npins; i++) {
+		int pin = desc->pins[i].number;
+
+		if (!amd_gpio_should_save(gpio_dev, pin))
+			continue;
+
+		writel(gpio_dev->saved_regs[i], gpio_dev->base + pin*4);
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops amd_gpio_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(amd_gpio_suspend,
+				     amd_gpio_resume)
+};
+#endif
+
 static struct pinctrl_desc amd_pinctrl_desc = {
 	.pins	= kerncz_pins,
 	.npins = ARRAY_SIZE(kerncz_pins),
@@ -751,6 +815,14 @@ static int amd_gpio_probe(struct platfor
 		return -EINVAL;
 	}
 
+#ifdef CONFIG_PM_SLEEP
+	gpio_dev->saved_regs = devm_kcalloc(&pdev->dev, amd_pinctrl_desc.npins,
+					    sizeof(*gpio_dev->saved_regs),
+					    GFP_KERNEL);
+	if (!gpio_dev->saved_regs)
+		return -ENOMEM;
+#endif
+
 	gpio_dev->pdev = pdev;
 	gpio_dev->gc.direction_input	= amd_gpio_direction_input;
 	gpio_dev->gc.direction_output	= amd_gpio_direction_output;
@@ -839,6 +911,9 @@ static struct platform_driver amd_gpio_d
 	.driver		= {
 		.name	= "amd_gpio",
 		.acpi_match_table = ACPI_PTR(amd_gpio_acpi_match),
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &amd_gpio_pm_ops,
+#endif
 	},
 	.probe		= amd_gpio_probe,
 	.remove		= amd_gpio_remove,
--- a/drivers/pinctrl/pinctrl-amd.h
+++ b/drivers/pinctrl/pinctrl-amd.h
@@ -95,6 +95,7 @@ struct amd_gpio {
 	struct gpio_chip        gc;
 	struct resource         *res;
 	struct platform_device  *pdev;
+	u32			*saved_regs;
 };
 
 /*  KERNCZ configuration*/


Patches currently in stable-queue which might be from drake@endlessm.com are

queue-4.9/pinctrl-amd-save-pin-registers-over-suspend-resume.patch

                 reply	other threads:[~2017-09-21 11:01 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1505991694252156@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=drake@endlessm.com \
    --cc=linus.walleij@linaro.org \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.