From: <gregkh@linuxfoundation.org>
To: hare@suse.de, bart.vanassche@wdc.com, gregkh@linuxfoundation.org,
hare@suse.com, hch@lst.de, martin.petersen@oracle.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "scsi: sg: factor out sg_fill_request_table()" has been added to the 4.13-stable tree
Date: Fri, 22 Sep 2017 12:14:40 +0200 [thread overview]
Message-ID: <15060752803259@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
scsi: sg: factor out sg_fill_request_table()
to the 4.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
scsi-sg-factor-out-sg_fill_request_table.patch
and it can be found in the queue-4.13 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 4759df905a474d245752c9dc94288e779b8734dd Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Fri, 15 Sep 2017 14:05:15 +0200
Subject: scsi: sg: factor out sg_fill_request_table()
From: Hannes Reinecke <hare@suse.de>
commit 4759df905a474d245752c9dc94288e779b8734dd upstream.
Factor out sg_fill_request_table() for better readability.
[mkp: typos, applied by hand]
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/sg.c | 61 ++++++++++++++++++++++++++++++------------------------
1 file changed, 35 insertions(+), 26 deletions(-)
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -828,6 +828,40 @@ static int max_sectors_bytes(struct requ
return max_sectors << 9;
}
+static void
+sg_fill_request_table(Sg_fd *sfp, sg_req_info_t *rinfo)
+{
+ Sg_request *srp;
+ int val;
+ unsigned int ms;
+
+ val = 0;
+ list_for_each_entry(srp, &sfp->rq_list, entry) {
+ if (val > SG_MAX_QUEUE)
+ break;
+ memset(&rinfo[val], 0, SZ_SG_REQ_INFO);
+ rinfo[val].req_state = srp->done + 1;
+ rinfo[val].problem =
+ srp->header.masked_status &
+ srp->header.host_status &
+ srp->header.driver_status;
+ if (srp->done)
+ rinfo[val].duration =
+ srp->header.duration;
+ else {
+ ms = jiffies_to_msecs(jiffies);
+ rinfo[val].duration =
+ (ms > srp->header.duration) ?
+ (ms - srp->header.duration) : 0;
+ }
+ rinfo[val].orphan = srp->orphan;
+ rinfo[val].sg_io_owned = srp->sg_io_owned;
+ rinfo[val].pack_id = srp->header.pack_id;
+ rinfo[val].usr_ptr = srp->header.usr_ptr;
+ val++;
+ }
+}
+
static long
sg_ioctl(struct file *filp, unsigned int cmd_in, unsigned long arg)
{
@@ -1012,38 +1046,13 @@ sg_ioctl(struct file *filp, unsigned int
return -EFAULT;
else {
sg_req_info_t *rinfo;
- unsigned int ms;
rinfo = kmalloc(SZ_SG_REQ_INFO * SG_MAX_QUEUE,
GFP_KERNEL);
if (!rinfo)
return -ENOMEM;
read_lock_irqsave(&sfp->rq_list_lock, iflags);
- val = 0;
- list_for_each_entry(srp, &sfp->rq_list, entry) {
- if (val >= SG_MAX_QUEUE)
- break;
- memset(&rinfo[val], 0, SZ_SG_REQ_INFO);
- rinfo[val].req_state = srp->done + 1;
- rinfo[val].problem =
- srp->header.masked_status &
- srp->header.host_status &
- srp->header.driver_status;
- if (srp->done)
- rinfo[val].duration =
- srp->header.duration;
- else {
- ms = jiffies_to_msecs(jiffies);
- rinfo[val].duration =
- (ms > srp->header.duration) ?
- (ms - srp->header.duration) : 0;
- }
- rinfo[val].orphan = srp->orphan;
- rinfo[val].sg_io_owned = srp->sg_io_owned;
- rinfo[val].pack_id = srp->header.pack_id;
- rinfo[val].usr_ptr = srp->header.usr_ptr;
- val++;
- }
+ sg_fill_request_table(sfp, rinfo);
read_unlock_irqrestore(&sfp->rq_list_lock, iflags);
result = __copy_to_user(p, rinfo,
SZ_SG_REQ_INFO * SG_MAX_QUEUE);
Patches currently in stable-queue which might be from hare@suse.de are
queue-4.13/scsi-sg-factor-out-sg_fill_request_table.patch
queue-4.13/skd-submit-requests-to-firmware-before-triggering-the-doorbell.patch
queue-4.13/block-relax-a-check-in-blk_start_queue.patch
queue-4.13/skd-avoid-that-module-unloading-triggers-a-use-after-free.patch
reply other threads:[~2017-09-22 10:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15060752803259@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=bart.vanassche@wdc.com \
--cc=hare@suse.com \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=martin.petersen@oracle.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.