Patch "net: phy: Fix mask value write on gmii2rgmii converter speed register" has been added to the 4.13-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    net: phy: Fix mask value write on gmii2rgmii converter speed register

to the 4.13-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     net-phy-fix-mask-value-write-on-gmii2rgmii-converter-speed-register.patch
and it can be found in the queue-4.13 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Mon Oct  9 09:32:35 CEST 2017
From: Fahad Kunnathadi <fahad.kunnathadi@dexceldesigns.com>
Date: Fri, 15 Sep 2017 12:01:58 +0530
Subject: net: phy: Fix mask value write on gmii2rgmii converter speed register

From: Fahad Kunnathadi <fahad.kunnathadi@dexceldesigns.com>


[ Upstream commit f2654a4781318dc7ab8d6cde66f1fa39eab980a9 ]

To clear Speed Selection in MDIO control register(0x10),
ie, clear bits 6 and 13 to zero while keeping other bits same.
Before AND operation,The Mask value has to be perform with bitwise NOT
operation (ie, ~ operator)

This patch clears current speed selection before writing the
new speed settings to gmii2rgmii converter

Fixes: f411a6160bd4 ("net: phy: Add gmiitorgmii converter support")

Signed-off-by: Fahad Kunnathadi <fahad.kunnathadi@dexceldesigns.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/xilinx_gmii2rgmii.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/phy/xilinx_gmii2rgmii.c
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -44,7 +44,7 @@ static int xgmiitorgmii_read_status(stru
 	priv->phy_drv->read_status(phydev);
 
 	val = mdiobus_read(phydev->mdio.bus, priv->addr, XILINX_GMII2RGMII_REG);
-	val &= XILINX_GMII2RGMII_SPEED_MASK;
+	val &= ~XILINX_GMII2RGMII_SPEED_MASK;
 
 	if (phydev->speed == SPEED_1000)
 		val |= BMCR_SPEED1000;


Patches currently in stable-queue which might be from fahad.kunnathadi@dexceldesigns.com are

queue-4.13/net-phy-fix-mask-value-write-on-gmii2rgmii-converter-speed-register.patch