Patch "brcmfmac: setup passive scan if requested by user-space" has been added to the 4.9-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    brcmfmac: setup passive scan if requested by user-space

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     brcmfmac-setup-passive-scan-if-requested-by-user-space.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 35f62727df0ed8e5e4857e162d94fd46d861f1cf Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Tue, 12 Sep 2017 10:47:54 +0200
Subject: brcmfmac: setup passive scan if requested by user-space

From: Arend Van Spriel <arend.vanspriel@broadcom.com>

commit 35f62727df0ed8e5e4857e162d94fd46d861f1cf upstream.

The driver was not properly configuring firmware with regard to the
type of scan. It always performed an active scan even when user-space
was requesting for passive scan, ie. the scan request was done without
any SSIDs specified.

Reported-by: Huang, Jiangyang <Jiangyang.Huang@itron.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c   |   19 ++--------
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h |    5 ++
 2 files changed, 9 insertions(+), 15 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -978,7 +978,7 @@ static void brcmf_escan_prep(struct brcm
 
 	eth_broadcast_addr(params_le->bssid);
 	params_le->bss_type = DOT11_BSSTYPE_ANY;
-	params_le->scan_type = 0;
+	params_le->scan_type = BRCMF_SCANTYPE_ACTIVE;
 	params_le->channel_num = 0;
 	params_le->nprobes = cpu_to_le32(-1);
 	params_le->active_time = cpu_to_le32(-1);
@@ -986,12 +986,9 @@ static void brcmf_escan_prep(struct brcm
 	params_le->home_time = cpu_to_le32(-1);
 	memset(&params_le->ssid_le, 0, sizeof(params_le->ssid_le));
 
-	/* if request is null exit so it will be all channel broadcast scan */
-	if (!request)
-		return;
-
 	n_ssids = request->n_ssids;
 	n_channels = request->n_channels;
+
 	/* Copy channel array if applicable */
 	brcmf_dbg(SCAN, "### List of channelspecs to scan ### %d\n",
 		  n_channels);
@@ -1028,16 +1025,8 @@ static void brcmf_escan_prep(struct brcm
 			ptr += sizeof(ssid_le);
 		}
 	} else {
-		brcmf_dbg(SCAN, "Broadcast scan %p\n", request->ssids);
-		if ((request->ssids) && request->ssids->ssid_len) {
-			brcmf_dbg(SCAN, "SSID %s len=%d\n",
-				  params_le->ssid_le.SSID,
-				  request->ssids->ssid_len);
-			params_le->ssid_le.SSID_len =
-				cpu_to_le32(request->ssids->ssid_len);
-			memcpy(&params_le->ssid_le.SSID, request->ssids->ssid,
-				request->ssids->ssid_len);
-		}
+		brcmf_dbg(SCAN, "Performing passive scan\n");
+		params_le->scan_type = BRCMF_SCANTYPE_PASSIVE;
 	}
 	/* Adding mask to channel numbers */
 	params_le->channel_num =
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
@@ -45,6 +45,11 @@
 #define BRCMF_SCAN_PARAMS_COUNT_MASK	0x0000ffff
 #define BRCMF_SCAN_PARAMS_NSSID_SHIFT	16
 
+/* scan type definitions */
+#define BRCMF_SCANTYPE_DEFAULT		0xFF
+#define BRCMF_SCANTYPE_ACTIVE		0
+#define BRCMF_SCANTYPE_PASSIVE		1
+
 /* primary (ie tx) key */
 #define BRCMF_PRIMARY_KEY		(1 << 1)
 #define DOT11_BSSTYPE_ANY		2


Patches currently in stable-queue which might be from arend.vanspriel@broadcom.com are

queue-4.9/brcmfmac-add-length-check-in-brcmf_cfg80211_escan_handler.patch
queue-4.9/brcmfmac-setup-passive-scan-if-requested-by-user-space.patch