Patch "mmc: core: add driver strength selection when selecting hs400es" has been added to the 4.9-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    mmc: core: add driver strength selection when selecting hs400es

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     mmc-core-add-driver-strength-selection-when-selecting-hs400es.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From fb458864d9a78cc433fec7979acbe4078c82d7a8 Mon Sep 17 00:00:00 2001
From: Chanho Min <chanho.min@lge.com>
Date: Tue, 26 Sep 2017 09:03:40 +0900
Subject: mmc: core: add driver strength selection when selecting hs400es

From: Chanho Min <chanho.min@lge.com>

commit fb458864d9a78cc433fec7979acbe4078c82d7a8 upstream.

The driver strength selection is missed and required when selecting
hs400es. So, It is added here.

Fixes: 81ac2af65793ecf ("mmc: core: implement enhanced strobe support")
Signed-off-by: Hankyung Yu <hankyung.yu@lge.com>
Signed-off-by: Chanho Min <chanho.min@lge.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/mmc.c |   36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1255,6 +1255,23 @@ out_err:
 	return err;
 }
 
+static void mmc_select_driver_type(struct mmc_card *card)
+{
+	int card_drv_type, drive_strength, drv_type;
+
+	card_drv_type = card->ext_csd.raw_driver_strength |
+			mmc_driver_type_mask(0);
+
+	drive_strength = mmc_select_drive_strength(card,
+						   card->ext_csd.hs200_max_dtr,
+						   card_drv_type, &drv_type);
+
+	card->drive_strength = drive_strength;
+
+	if (drv_type)
+		mmc_set_driver_type(card->host, drv_type);
+}
+
 static int mmc_select_hs400es(struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
@@ -1303,6 +1320,8 @@ static int mmc_select_hs400es(struct mmc
 		goto out_err;
 	}
 
+	mmc_select_driver_type(card);
+
 	/* Switch card to HS400 */
 	val = EXT_CSD_TIMING_HS400 |
 	      card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
@@ -1336,23 +1355,6 @@ out_err:
 	return err;
 }
 
-static void mmc_select_driver_type(struct mmc_card *card)
-{
-	int card_drv_type, drive_strength, drv_type;
-
-	card_drv_type = card->ext_csd.raw_driver_strength |
-			mmc_driver_type_mask(0);
-
-	drive_strength = mmc_select_drive_strength(card,
-						   card->ext_csd.hs200_max_dtr,
-						   card_drv_type, &drv_type);
-
-	card->drive_strength = drive_strength;
-
-	if (drv_type)
-		mmc_set_driver_type(card->host, drv_type);
-}
-
 /*
  * For device supporting HS200 mode, the following sequence
  * should be done before executing the tuning process.


Patches currently in stable-queue which might be from chanho.min@lge.com are

queue-4.9/mmc-core-add-driver-strength-selection-when-selecting-hs400es.patch