From: <gregkh@linuxfoundation.org>
To: wim@iguana.be, gregkh@linuxfoundation.org, mwilck@suse.com,
pbonzini@redhat.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "watchdog: Revert "iTCO_wdt: all versions count down twice"" has been added to the 4.13-stable tree
Date: Thu, 12 Oct 2017 13:58:02 +0200 [thread overview]
Message-ID: <150780948212327@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
watchdog: Revert "iTCO_wdt: all versions count down twice"
to the 4.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
watchdog-revert-itco_wdt-all-versions-count-down-twice.patch
and it can be found in the queue-4.13 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From fc61e83a29308601e6e8a0759e24fc8fe2122692 Mon Sep 17 00:00:00 2001
From: Wim Van Sebroeck <wim@iguana.be>
Date: Sat, 9 Sep 2017 17:41:24 +0200
Subject: watchdog: Revert "iTCO_wdt: all versions count down twice"
From: Wim Van Sebroeck <wim@iguana.be>
commit fc61e83a29308601e6e8a0759e24fc8fe2122692 upstream.
This reverts commit 1fccb73011ea8a5fa0c6d357c33fa29c695139ea.
Reported as Bug 196509 - iTCO_wdt regression reboot before timeout expire
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/watchdog/watchdog-parameters.txt | 2 +-
drivers/watchdog/iTCO_wdt.c | 22 ++++++++++++----------
2 files changed, 13 insertions(+), 11 deletions(-)
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -117,7 +117,7 @@ nowayout: Watchdog cannot be stopped onc
-------------------------------------------------
iTCO_wdt:
heartbeat: Watchdog heartbeat in seconds.
- (5<=heartbeat<=74 (TCO v1) or 1226 (TCO v2), default=30)
+ (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
nowayout: Watchdog cannot be stopped once started
(default=kernel config parameter)
-------------------------------------------------
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -306,15 +306,16 @@ static int iTCO_wdt_ping(struct watchdog
iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout);
- /* Reset the timeout status bit so that the timer
- * needs to count down twice again before rebooting */
- outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */
-
/* Reload the timer by writing to the TCO Timer Counter register */
- if (p->iTCO_version >= 2)
+ if (p->iTCO_version >= 2) {
outw(0x01, TCO_RLD(p));
- else if (p->iTCO_version == 1)
+ } else if (p->iTCO_version == 1) {
+ /* Reset the timeout status bit so that the timer
+ * needs to count down twice again before rebooting */
+ outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */
+
outb(0x01, TCO_RLD(p));
+ }
spin_unlock(&p->io_lock);
return 0;
@@ -327,8 +328,11 @@ static int iTCO_wdt_set_timeout(struct w
unsigned char val8;
unsigned int tmrval;
- /* The timer counts down twice before rebooting */
- tmrval = seconds_to_ticks(p, t) / 2;
+ tmrval = seconds_to_ticks(p, t);
+
+ /* For TCO v1 the timer counts down twice before rebooting */
+ if (p->iTCO_version == 1)
+ tmrval /= 2;
/* from the specs: */
/* "Values of 0h-3h are ignored and should not be attempted" */
@@ -381,8 +385,6 @@ static unsigned int iTCO_wdt_get_timelef
spin_lock(&p->io_lock);
val16 = inw(TCO_RLD(p));
val16 &= 0x3ff;
- if (!(inw(TCO1_STS(p)) & 0x0008))
- val16 += (inw(TCOv2_TMR(p)) & 0x3ff);
spin_unlock(&p->io_lock);
time_left = ticks_to_seconds(p, val16);
Patches currently in stable-queue which might be from wim@iguana.be are
queue-4.13/watchdog-revert-itco_wdt-all-versions-count-down-twice.patch
reply other threads:[~2017-10-12 11:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=150780948212327@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=mwilck@suse.com \
--cc=pbonzini@redhat.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.