All of lore.kernel.org
 help / color / mirror / Atom feed
From: Trent Piepho <tpiepho-cgc2CodaaHDQT0dZR+AlfA@public.gmane.org>
To: "linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: "shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org"
	<shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	"kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org"
	<kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	"gerg-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org"
	<gerg-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>,
	"fabio.estevam-3arQi8VN3Tc@public.gmane.org"
	<fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Subject: [PATCH 1/4] spi: imx: GPIO based chip selects should not be required
Date: Fri, 13 Oct 2017 18:22:01 +0000	[thread overview]
Message-ID: <1507918921.24265.8.camel@impinj.com> (raw)

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1893 bytes --]

The driver will fail to load if no gpio chip selects are specified,
this patch changes this so that it no longer fails.

It's possible to use all native chip selects, in which case there is
no reason to have a gpio chip select array.  This is what happens if
the *optional* device tree property "cs-gpios" is omitted.

The spi core already checks for the absence of gpio chip selects in
the master and assigns any slaves the gpio_cs value of -ENOENT.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
 drivers/spi/spi-imx.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index babb15f07995..07e6250f2dad 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1457,22 +1457,19 @@ static int spi_imx_probe(struct platform_device *pdev)
 		goto out_clk_put;
 	}
 
-	if (!master->cs_gpios) {
-		dev_err(&pdev->dev, "No CS GPIOs available\n");
-		ret = -EINVAL;
-		goto out_clk_put;
-	}
-
-	for (i = 0; i < master->num_chipselect; i++) {
-		if (!gpio_is_valid(master->cs_gpios[i]))
-			continue;
-
-		ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
-					DRIVER_NAME);
-		if (ret) {
-			dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
-				master->cs_gpios[i]);
-			goto out_clk_put;
+	/* Request GPIO CS lines, if any */
+	if (master->cs_gpios) {
+		for (i = 0; i < master->num_chipselect; i++) {
+			if (!gpio_is_valid(master->cs_gpios[i]))
+				continue;
+
+			ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
+						DRIVER_NAME);
+			if (ret) {
+				dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
+					master->cs_gpios[i]);
+				goto out_clk_put;
+			}
 		}
 	}
 
-- 
2.13.6
N‹§²æìr¸›yúèšØb²X¬¶Ç§vØ^–)Þº{.nÇ+‰·¥Š{±²˜¢žØ^n‡r¡ö¦zË\x1aëh™¨è­Ú&¢îý»\x05ËÛÔØï¦v¬Îf\x1dp)¹¹br	šê+€Ê+zf£¢·hšˆ§~†­†Ûiÿûàz¹\x1e®w¥¢¸?™¨è­Ú&¢)ߢ^[f

WARNING: multiple messages have this Message-ID (diff)
From: tpiepho@impinj.com (Trent Piepho)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] spi: imx: GPIO based chip selects should not be required
Date: Fri, 13 Oct 2017 18:22:01 +0000	[thread overview]
Message-ID: <1507918921.24265.8.camel@impinj.com> (raw)

The driver will fail to load if no gpio chip selects are specified,
this patch changes this so that it no longer fails.

It's possible to use all native chip selects, in which case there is
no reason to have a gpio chip select array.  This is what happens if
the *optional* device tree property "cs-gpios" is omitted.

The spi core already checks for the absence of gpio chip selects in
the master and assigns any slaves the gpio_cs value of -ENOENT.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
 drivers/spi/spi-imx.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index babb15f07995..07e6250f2dad 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1457,22 +1457,19 @@ static int spi_imx_probe(struct platform_device *pdev)
 		goto out_clk_put;
 	}
 
-	if (!master->cs_gpios) {
-		dev_err(&pdev->dev, "No CS GPIOs available\n");
-		ret = -EINVAL;
-		goto out_clk_put;
-	}
-
-	for (i = 0; i < master->num_chipselect; i++) {
-		if (!gpio_is_valid(master->cs_gpios[i]))
-			continue;
-
-		ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
-					DRIVER_NAME);
-		if (ret) {
-			dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
-				master->cs_gpios[i]);
-			goto out_clk_put;
+	/* Request GPIO CS lines, if any */
+	if (master->cs_gpios) {
+		for (i = 0; i < master->num_chipselect; i++) {
+			if (!gpio_is_valid(master->cs_gpios[i]))
+				continue;
+
+			ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
+						DRIVER_NAME);
+			if (ret) {
+				dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
+					master->cs_gpios[i]);
+				goto out_clk_put;
+			}
 		}
 	}
 
-- 
2.13.6

             reply	other threads:[~2017-10-13 18:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-13 18:22 Trent Piepho [this message]
2017-10-13 18:22 ` [PATCH 1/4] spi: imx: GPIO based chip selects should not be required Trent Piepho
     [not found] ` <1507918921.24265.8.camel-cgc2CodaaHDQT0dZR+AlfA@public.gmane.org>
2017-10-19 10:17   ` Oleksij Rempel
2017-10-19 10:17     ` Oleksij Rempel
  -- strict thread matches above, loose matches on Subject: below --
2017-10-13 19:54 Trent Piepho
2017-10-13 19:54 ` Trent Piepho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1507918921.24265.8.camel@impinj.com \
    --to=tpiepho-cgc2codaahdqt0dzr+alfa@public.gmane.org \
    --cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
    --cc=gerg-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.