From: David Ahern <dsahern@gmail.com>
To: netdev@vger.kernel.org
Cc: xiyou.wangcong@gmail.com, David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next] tcp: Check daddr_cache before use in tracepoint
Date: Mon, 16 Oct 2017 14:29:47 -0700 [thread overview]
Message-ID: <1508189387-27931-1-git-send-email-dsahern@gmail.com> (raw)
Running perf in one window to capture tcp_retransmit_skb tracepoint:
$ perf record -e tcp:tcp_retransmit_skb -a
And causing a retransmission on an active TCP session (e.g., dropping
packets in the receiver, changing MTU on the interface to 500 and back
to 1500) triggers a panic:
[ 58.543144] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 58.545300] IP: perf_trace_tcp_retransmit_skb+0xd0/0x145
[ 58.546770] PGD 0 P4D 0
[ 58.547472] Oops: 0000 [#1] SMP
[ 58.548328] Modules linked in: vrf
[ 58.549262] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.0-rc4+ #26
[ 58.551004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 58.554560] task: ffffffff81a0e540 task.stack: ffffffff81a00000
[ 58.555817] RIP: 0010:perf_trace_tcp_retransmit_skb+0xd0/0x145
[ 58.557137] RSP: 0018:ffff88003fc03d68 EFLAGS: 00010282
[ 58.558292] RAX: 0000000000000000 RBX: ffffe8ffffc0ec80 RCX: ffff880038543098
[ 58.559850] RDX: 0400000000000000 RSI: ffff88003fc03d70 RDI: ffff88003fc14b68
[ 58.561099] RBP: ffff88003fc03da8 R08: 0000000000000000 R09: ffffea0000d3224a
[ 58.562005] R10: ffff88003fc03db8 R11: 0000000000000010 R12: ffff8800385428c0
[ 58.562930] R13: ffffe8ffffc0e478 R14: ffffffff81a93a40 R15: ffff88003d4f0c00
[ 58.563845] FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[ 58.564873] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 58.565613] CR2: 0000000000000008 CR3: 000000003d68f004 CR4: 00000000000606f0
[ 58.566538] Call Trace:
[ 58.566865] <IRQ>
[ 58.567140] __tcp_retransmit_skb+0x4ab/0x4c6
[ 58.567704] ? tcp_set_ca_state+0x22/0x3f
[ 58.568231] tcp_retransmit_skb+0x14/0xa3
[ 58.568754] tcp_retransmit_timer+0x472/0x5e3
[ 58.569324] ? tcp_write_timer_handler+0x1e9/0x1e9
[ 58.569946] tcp_write_timer_handler+0x95/0x1e9
[ 58.570548] tcp_write_timer+0x2a/0x58
Check that daddr_cache is non-NULL before de-referencing.
Fixes: e086101b150a ("tcp: add a tracepoint for tcp retransmission")
Signed-off-by: David Ahern <dsahern@gmail.com>
---
include/trace/events/tcp.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/trace/events/tcp.h b/include/trace/events/tcp.h
index 3d1cbd072b7e..13e8ee8af2c8 100644
--- a/include/trace/events/tcp.h
+++ b/include/trace/events/tcp.h
@@ -48,7 +48,8 @@ TRACE_EVENT(tcp_retransmit_skb,
pin6 = (struct in6_addr *)__entry->saddr_v6;
*pin6 = np->saddr;
pin6 = (struct in6_addr *)__entry->daddr_v6;
- *pin6 = *(np->daddr_cache);
+ if (np->daddr_cache)
+ *pin6 = *(np->daddr_cache);
} else {
pin6 = (struct in6_addr *)__entry->saddr_v6;
ipv6_addr_set_v4mapped(inet->inet_saddr, pin6);
--
2.1.4
next reply other threads:[~2017-10-16 21:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-16 21:29 David Ahern [this message]
2017-10-16 21:46 ` [PATCH net-next] tcp: Check daddr_cache before use in tracepoint Cong Wang
2017-10-16 21:55 ` David Ahern
2017-10-16 22:05 ` Cong Wang
2017-10-16 22:08 ` David Ahern
2017-10-17 3:45 ` Eric Dumazet
2017-10-17 15:32 ` David Ahern
2017-10-17 17:05 ` Cong Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508189387-27931-1-git-send-email-dsahern@gmail.com \
--to=dsahern@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.