[PATCH 2/4] ARM: dts: imx6sx-softing-vining-2000: Fix the 'interrupt-parent' property

[festevam@gmail.com (Fabio Estevam)]

From: Fabio Estevam <fabio.estevam@nxp.com>

The correct property name is 'interrupt-parent', so fix it accordingly.

This fixes the following build warning:

arch/arm/boot/dts/imx6sx-softing-vining-2000.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /soc/aips-bus at 02100000/ethernet at 02188000/mdio/ethernet0-phy at 0
arch/arm/boot/dts/imx6sx-softing-vining-2000.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /soc/aips-bus at 02100000/ethernet at 021b4000/mdio/ethernet1-phy at 0

Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/boot/dts/imx6sx-softing-vining-2000.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index ee012bc..44bfeac 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -116,7 +116,7 @@
 		ethphy0: ethernet0-phy at 0 {
 			reg = <0>;
 			max-speed = <100>;
-			interrupts-parent = <&gpio2>;
+			interrupt-parent = <&gpio2>;
 			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
@@ -139,7 +139,7 @@
 		ethphy1: ethernet1-phy at 0 {
 			reg = <0>;
 			max-speed = <100>;
-			interrupts-parent = <&gpio2>;
+			interrupt-parent = <&gpio2>;
 			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
-- 
2.7.4