[PATCH 1/3] dt-bindings: soc: qcom: Support GLINK intents

[Chris Lew <clew@codeaurora.org>]

Virtual GLINK channels may know what throughput to expect from a
remoteproc. An intent advertises to the remoteproc this channel is
ready to receive data. Allow a channel to define the size and amount of
intents to be prequeued.

Signed-off-by: Chris Lew <clew@codeaurora.org>
---
 Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
index b277eca861f7..6c21f76822ca 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
@@ -39,6 +39,14 @@ of these nodes are defined by the individual bindings for the specific function
 	Definition: a list of channels tied to this function, used for matching
 		    the function to a set of virtual channels
 
+- intents:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: a list of size,amount pairs describing what intents should
+		    be preallocated for this virtual channel. If a GLINK node
+		    supports intents, an intent advertises this channel is ready
+		    to receive data.
+
 = EXAMPLE
 The following example represents the GLINK RPM node on a MSM8996 device, with
 the function for the "rpm_request" channel defined, which is used for
@@ -69,6 +77,8 @@ regualtors and root clocks.
 			compatible = "qcom,rpm-msm8996";
 			qcom,glink-channels = "rpm_requests";
 
+			intents = <0x400 5
+				   0x800 1>;
 			...
 		};
 	};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project