From: <gregkh@linuxfoundation.org>
To: lucien.xin@gmail.com, davem@davemloft.net,
gregkh@linuxfoundation.org, jishi@redhat.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ipip: only increase err_count for some certain type icmp in ipip_err" has been added to the 4.4-stable tree
Date: Thu, 16 Nov 2017 15:46:22 +0100 [thread overview]
Message-ID: <1510843582224255@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ipip: only increase err_count for some certain type icmp in ipip_err
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
ipip-only-increase-err_count-for-some-certain-type-icmp-in-ipip_err.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Thu Nov 16 15:08:14 CET 2017
From: Xin Long <lucien.xin@gmail.com>
Date: Thu, 26 Oct 2017 19:19:56 +0800
Subject: ipip: only increase err_count for some certain type icmp in ipip_err
From: Xin Long <lucien.xin@gmail.com>
[ Upstream commit f3594f0a7ea36661d7fd942facd7f31a64245f1a ]
t->err_count is used to count the link failure on tunnel and an err
will be reported to user socket in tx path if t->err_count is not 0.
udp socket could even return EHOSTUNREACH to users.
Since commit fd58156e456d ("IPIP: Use ip-tunneling code.") removed
the 'switch check' for icmp type in ipip_err(), err_count would be
increased by the icmp packet with ICMP_EXC_FRAGTIME code. an link
failure would be reported out due to this.
In Jianlin's case, when receiving ICMP_EXC_FRAGTIME a icmp packet,
udp netperf failed with the err:
send_data: data send error: No route to host (errno 113)
We expect this error reported from tunnel to socket when receiving
some certain type icmp, but not ICMP_EXC_FRAGTIME, ICMP_SR_FAILED
or ICMP_PARAMETERPROB ones.
This patch is to bring 'switch check' for icmp type back to ipip_err
so that it only reports link failure for the right type icmp, just as
in ipgre_err() and ipip6_err().
Fixes: fd58156e456d ("IPIP: Use ip-tunneling code.")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/ipip.c | 58 ++++++++++++++++++++++++++++++++++++++++----------------
1 file changed, 42 insertions(+), 16 deletions(-)
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -129,42 +129,68 @@ static struct rtnl_link_ops ipip_link_op
static int ipip_err(struct sk_buff *skb, u32 info)
{
-/* All the routers (except for Linux) return only
- 8 bytes of packet payload. It means, that precise relaying of
- ICMP in the real Internet is absolutely infeasible.
- */
+ /* All the routers (except for Linux) return only
+ 8 bytes of packet payload. It means, that precise relaying of
+ ICMP in the real Internet is absolutely infeasible.
+ */
struct net *net = dev_net(skb->dev);
struct ip_tunnel_net *itn = net_generic(net, ipip_net_id);
const struct iphdr *iph = (const struct iphdr *)skb->data;
- struct ip_tunnel *t;
- int err;
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
+ struct ip_tunnel *t;
+ int err = 0;
+
+ switch (type) {
+ case ICMP_DEST_UNREACH:
+ switch (code) {
+ case ICMP_SR_FAILED:
+ /* Impossible event. */
+ goto out;
+ default:
+ /* All others are translated to HOST_UNREACH.
+ * rfc2003 contains "deep thoughts" about NET_UNREACH,
+ * I believe they are just ether pollution. --ANK
+ */
+ break;
+ }
+ break;
+
+ case ICMP_TIME_EXCEEDED:
+ if (code != ICMP_EXC_TTL)
+ goto out;
+ break;
+
+ case ICMP_REDIRECT:
+ break;
+
+ default:
+ goto out;
+ }
- err = -ENOENT;
t = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
iph->daddr, iph->saddr, 0);
- if (!t)
+ if (!t) {
+ err = -ENOENT;
goto out;
+ }
if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
- ipv4_update_pmtu(skb, dev_net(skb->dev), info,
- t->parms.link, 0, IPPROTO_IPIP, 0);
- err = 0;
+ ipv4_update_pmtu(skb, net, info, t->parms.link, 0,
+ iph->protocol, 0);
goto out;
}
if (type == ICMP_REDIRECT) {
- ipv4_redirect(skb, dev_net(skb->dev), t->parms.link, 0,
- IPPROTO_IPIP, 0);
- err = 0;
+ ipv4_redirect(skb, net, t->parms.link, 0, iph->protocol, 0);
goto out;
}
- if (t->parms.iph.daddr == 0)
+ if (t->parms.iph.daddr == 0) {
+ err = -ENOENT;
goto out;
+ }
- err = 0;
if (t->parms.iph.ttl == 0 && type == ICMP_TIME_EXCEEDED)
goto out;
Patches currently in stable-queue which might be from lucien.xin@gmail.com are
queue-4.4/sctp-reset-owner-sk-for-data-chunks-on-out-queues-when-migrating-a-sock.patch
queue-4.4/ipip-only-increase-err_count-for-some-certain-type-icmp-in-ipip_err.patch
queue-4.4/sctp-add-the-missing-sock_owned_by_user-check-in-sctp_icmp_redirect.patch
queue-4.4/ip6_gre-only-increase-err_count-for-some-certain-type-icmpv6-in-ip6gre_err.patch
reply other threads:[~2017-11-16 14:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1510843582224255@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=jishi@redhat.com \
--cc=lucien.xin@gmail.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.