From: <gregkh@linuxfoundation.org>
To: alexander.levin@verizon.com, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "Revert "dt-bindings: Add vendor prefix for LEGO"" has been added to the 4.9-stable tree
Date: Sun, 19 Nov 2017 11:33:20 +0100 [thread overview]
Message-ID: <1511087600115175@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
Revert "dt-bindings: Add vendor prefix for LEGO"
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
revert-dt-bindings-add-vendor-prefix-for-lego.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Sun Nov 19 11:32:28 CET 2017
From: Sasha Levin <alexander.levin@verizon.com>
Date: Thu, 16 Nov 2017 21:04:38 -0500
Subject: Revert "dt-bindings: Add vendor prefix for LEGO"
From: Sasha Levin <alexander.levin@verizon.com>
This reverts commit 04e13a5ec96db94c1cc8ce7b0b1e1b626e0c00c7.
As Ben pointed out, these drivers don't exist in <=4.9.
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 -
1 file changed, 1 deletion(-)
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -154,7 +154,6 @@ kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
lacie LaCie
lantiq Lantiq Semiconductor
-lego LEGO Systems A/S
lenovo Lenovo Group Ltd.
lg LG Corporation
linux Linux-specific binding
Patches currently in stable-queue which might be from alexander.levin@verizon.com are
queue-4.9/ata-sata_mv-should-depend-on-has_dma.patch
queue-4.9/scsi-lpfc-clear-the-vendorversion-in-the-plogi-plogi-acc-payload.patch
queue-4.9/arm-dts-omap5-uevm-allow-bootloader-to-configure-usb-ethernet-mac.patch
queue-4.9/ixgbe-handle-close-suspend-race-with-netif_device_detach-present.patch
queue-4.9/extcon-remove-potential-problem-when-calling-extcon_register_notifier.patch
queue-4.9/scsi-lpfc-correct-host-name-in-symbolic_name-field.patch
queue-4.9/alsa-vx-don-t-try-to-update-capture-stream-before-running.patch
queue-4.9/staging-greybus-add-host-device-function-pointer-checks.patch
queue-4.9/gpu-drm-mgag200-mgag200_main-handle-error-from-pci_iomap.patch
queue-4.9/staging-rtl8188eu-fix-incorrect-error-tags-from-logs.patch
queue-4.9/uapi-fix-linux-rds.h-userspace-compilation-error.patch
queue-4.9/ata-sata_highbank-should-depend-on-has_dma.patch
queue-4.9/power-supply-axp288_fuel_gauge-read-15-bit-values-2-registers-at-a-time.patch
queue-4.9/mips-init-ensure-bootmem-does-not-corrupt-reserved-memory.patch
queue-4.9/extcon-palmas-check-the-parent-instance-to-prevent-the-null.patch
queue-4.9/scsi-lpfc-fcoe-vport-enable-disable-does-not-bring-up-the-vport.patch
queue-4.9/power-supply-axp288_fuel_gauge-read-12-bit-values-2-registers-at-a-time.patch
queue-4.9/revert-dt-bindings-add-vendor-prefix-for-lego.patch
queue-4.9/mips-netlogic-exclude-netlogic-xlp-pic-code-from-xlr-builds.patch
queue-4.9/drm-sti-sti_vtg-handle-return-null-error-from-devm_ioremap_nocache.patch
queue-4.9/ixgbe-reduce-i2c-retry-count-on-x550-devices.patch
queue-4.9/ixgbe-do-not-disable-fec-from-the-driver.patch
queue-4.9/x86-irq-trace-add-__irq_entry-annotation-to-x86-s-platform-irq-handlers.patch
queue-4.9/scsi-lpfc-correct-issue-leading-to-oops-during-link-reset.patch
queue-4.9/igb-fix-hw_dbg-logging-in-igb_update_flash_i210.patch
queue-4.9/arm-dts-fix-omap3-off-mode-pull-defines.patch
queue-4.9/arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch
queue-4.9/uapi-fix-linux-rds.h-userspace-compilation-errors.patch
queue-4.9/scsi-lpfc-add-missing-memory-barrier.patch
queue-4.9/alsa-vx-fix-possible-transfer-overflow.patch
queue-4.9/backlight-lcd-fix-race-condition-during-register.patch
queue-4.9/fm10k-request-reset-when-mbx-state-changes.patch
queue-4.9/arm64-dts-ns2-reserve-memory-for-nitro-firmware.patch
queue-4.9/staging-rtl8712-fixed-little-endian-problem.patch
queue-4.9/revert-crypto-xts-add-ecb-dependency.patch
queue-4.9/backlight-adp5520-fix-error-handling-in-adp5520_bl_probe.patch
queue-4.9/staging-wilc1000-fix-endian-sparse-warning.patch
queue-4.9/alsa-hda-realtek-add-new-codec-id-alc299.patch
queue-4.9/ixgbe-fix-aer-error-handling.patch
queue-4.9/scsi-ufs-add-capability-to-keep-auto-bkops-always-enabled.patch
queue-4.9/tcp-provide-timestamps-for-partial-writes.patch
queue-4.9/revert-uapi-fix-linux-rds.h-userspace-compilation-errors.patch
queue-4.9/ixgbe-configure-advertised-speeds-correctly-for-kr-kx-backplane.patch
queue-4.9/mips-traps-ensure-l1-l2-ecc-checking-match-for-cm3-systems.patch
queue-4.9/ixgbe-add-mask-for-64-rss-queues.patch
queue-4.9/revert-dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch
queue-4.9/rtc-rx8010-change-lock-mechanism.patch
queue-4.9/mips-end-asm-function-prologue-macros-with-.insn.patch
queue-4.9/ata-ata_bmdma-should-depend-on-has_dma.patch
queue-4.9/drm-omap-panel-sony-acx565akm.c-add-module_alias.patch
queue-4.9/ixgbe-fix-reporting-of-100mb-capability.patch
queue-4.9/igb-close-suspend-race-in-netif_device_detach.patch
queue-4.9/igb-reset-the-phy-before-reading-the-phy-id.patch
queue-4.9/mips-init-ensure-reserved-memory-regions-are-not-added-to-bootmem.patch
queue-4.9/arm-omap2-fix-init-for-multiple-quirks-for-the-same-soc.patch
queue-4.9/scsi-ufs-qcom-fix-module-autoload.patch
queue-4.9/arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch
reply other threads:[~2017-11-19 10:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511087600115175@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.levin@verizon.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.