From: <gregkh@linuxfoundation.org>
To: alexander.levin@verizon.com, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "Revert "crypto: xts - Add ECB dependency"" has been added to the 4.9-stable tree
Date: Sun, 19 Nov 2017 11:33:20 +0100 [thread overview]
Message-ID: <151108760028186@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
Revert "crypto: xts - Add ECB dependency"
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
revert-crypto-xts-add-ecb-dependency.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Sun Nov 19 11:32:28 CET 2017
From: Sasha Levin <alexander.levin@verizon.com>
Date: Mon, 13 Nov 2017 17:55:20 -0500
Subject: Revert "crypto: xts - Add ECB dependency"
From: Sasha Levin <alexander.levin@verizon.com>
This reverts commit 6145171a6bc0abdc3eca7a4b795ede467d2ba569.
The commit fixes a bug that was only introduced in 4.10, thus is
irrelevant for <=4.9.
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
crypto/Kconfig | 1 -
1 file changed, 1 deletion(-)
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -360,7 +360,6 @@ config CRYPTO_XTS
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_GF128MUL
- select CRYPTO_ECB
help
XTS: IEEE1619/D16 narrow block cipher use with aes-xts-plain,
key size 256, 384 or 512 bits. This implementation currently
Patches currently in stable-queue which might be from alexander.levin@verizon.com are
queue-4.9/ata-sata_mv-should-depend-on-has_dma.patch
queue-4.9/scsi-lpfc-clear-the-vendorversion-in-the-plogi-plogi-acc-payload.patch
queue-4.9/arm-dts-omap5-uevm-allow-bootloader-to-configure-usb-ethernet-mac.patch
queue-4.9/ixgbe-handle-close-suspend-race-with-netif_device_detach-present.patch
queue-4.9/extcon-remove-potential-problem-when-calling-extcon_register_notifier.patch
queue-4.9/scsi-lpfc-correct-host-name-in-symbolic_name-field.patch
queue-4.9/alsa-vx-don-t-try-to-update-capture-stream-before-running.patch
queue-4.9/staging-greybus-add-host-device-function-pointer-checks.patch
queue-4.9/gpu-drm-mgag200-mgag200_main-handle-error-from-pci_iomap.patch
queue-4.9/staging-rtl8188eu-fix-incorrect-error-tags-from-logs.patch
queue-4.9/uapi-fix-linux-rds.h-userspace-compilation-error.patch
queue-4.9/ata-sata_highbank-should-depend-on-has_dma.patch
queue-4.9/power-supply-axp288_fuel_gauge-read-15-bit-values-2-registers-at-a-time.patch
queue-4.9/mips-init-ensure-bootmem-does-not-corrupt-reserved-memory.patch
queue-4.9/extcon-palmas-check-the-parent-instance-to-prevent-the-null.patch
queue-4.9/scsi-lpfc-fcoe-vport-enable-disable-does-not-bring-up-the-vport.patch
queue-4.9/power-supply-axp288_fuel_gauge-read-12-bit-values-2-registers-at-a-time.patch
queue-4.9/revert-dt-bindings-add-vendor-prefix-for-lego.patch
queue-4.9/mips-netlogic-exclude-netlogic-xlp-pic-code-from-xlr-builds.patch
queue-4.9/drm-sti-sti_vtg-handle-return-null-error-from-devm_ioremap_nocache.patch
queue-4.9/ixgbe-reduce-i2c-retry-count-on-x550-devices.patch
queue-4.9/ixgbe-do-not-disable-fec-from-the-driver.patch
queue-4.9/x86-irq-trace-add-__irq_entry-annotation-to-x86-s-platform-irq-handlers.patch
queue-4.9/scsi-lpfc-correct-issue-leading-to-oops-during-link-reset.patch
queue-4.9/igb-fix-hw_dbg-logging-in-igb_update_flash_i210.patch
queue-4.9/arm-dts-fix-omap3-off-mode-pull-defines.patch
queue-4.9/arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch
queue-4.9/uapi-fix-linux-rds.h-userspace-compilation-errors.patch
queue-4.9/scsi-lpfc-add-missing-memory-barrier.patch
queue-4.9/alsa-vx-fix-possible-transfer-overflow.patch
queue-4.9/backlight-lcd-fix-race-condition-during-register.patch
queue-4.9/fm10k-request-reset-when-mbx-state-changes.patch
queue-4.9/arm64-dts-ns2-reserve-memory-for-nitro-firmware.patch
queue-4.9/staging-rtl8712-fixed-little-endian-problem.patch
queue-4.9/revert-crypto-xts-add-ecb-dependency.patch
queue-4.9/backlight-adp5520-fix-error-handling-in-adp5520_bl_probe.patch
queue-4.9/staging-wilc1000-fix-endian-sparse-warning.patch
queue-4.9/alsa-hda-realtek-add-new-codec-id-alc299.patch
queue-4.9/ixgbe-fix-aer-error-handling.patch
queue-4.9/scsi-ufs-add-capability-to-keep-auto-bkops-always-enabled.patch
queue-4.9/tcp-provide-timestamps-for-partial-writes.patch
queue-4.9/revert-uapi-fix-linux-rds.h-userspace-compilation-errors.patch
queue-4.9/ixgbe-configure-advertised-speeds-correctly-for-kr-kx-backplane.patch
queue-4.9/mips-traps-ensure-l1-l2-ecc-checking-match-for-cm3-systems.patch
queue-4.9/ixgbe-add-mask-for-64-rss-queues.patch
queue-4.9/revert-dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch
queue-4.9/rtc-rx8010-change-lock-mechanism.patch
queue-4.9/mips-end-asm-function-prologue-macros-with-.insn.patch
queue-4.9/ata-ata_bmdma-should-depend-on-has_dma.patch
queue-4.9/drm-omap-panel-sony-acx565akm.c-add-module_alias.patch
queue-4.9/ixgbe-fix-reporting-of-100mb-capability.patch
queue-4.9/igb-close-suspend-race-in-netif_device_detach.patch
queue-4.9/igb-reset-the-phy-before-reading-the-phy-id.patch
queue-4.9/mips-init-ensure-reserved-memory-regions-are-not-added-to-bootmem.patch
queue-4.9/arm-omap2-fix-init-for-multiple-quirks-for-the-same-soc.patch
queue-4.9/scsi-ufs-qcom-fix-module-autoload.patch
queue-4.9/arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch
reply other threads:[~2017-11-19 10:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=151108760028186@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.levin@verizon.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.