From: <gregkh@linuxfoundation.org>
To: alexander.levin@verizon.com, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "Revert "dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification"" has been added to the 4.9-stable tree
Date: Sun, 19 Nov 2017 11:33:20 +0100 [thread overview]
Message-ID: <151108760041139@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
Revert "dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification"
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
revert-dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Sun Nov 19 11:32:28 CET 2017
From: Sasha Levin <alexander.levin@verizon.com>
Date: Thu, 16 Nov 2017 21:04:58 -0500
Subject: Revert "dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification"
From: Sasha Levin <alexander.levin@verizon.com>
This reverts commit 852bf68b7a62195c3c0c63f3b11f3f30958fc220.
As Ben pointed out, these drivers don't exist in <=4.9.
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/arm/davinci.txt | 4 ----
1 file changed, 4 deletions(-)
--- a/Documentation/devicetree/bindings/arm/davinci.txt
+++ b/Documentation/devicetree/bindings/arm/davinci.txt
@@ -13,10 +13,6 @@ EnBW AM1808 based CMC board
Required root node properties:
- compatible = "enbw,cmc", "ti,da850;
-LEGO MINDSTORMS EV3 (AM1808 based)
-Required root node properties:
- - compatible = "lego,ev3", "ti,da850";
-
Generic DaVinci Boards
----------------------
Patches currently in stable-queue which might be from alexander.levin@verizon.com are
queue-4.9/ata-sata_mv-should-depend-on-has_dma.patch
queue-4.9/scsi-lpfc-clear-the-vendorversion-in-the-plogi-plogi-acc-payload.patch
queue-4.9/arm-dts-omap5-uevm-allow-bootloader-to-configure-usb-ethernet-mac.patch
queue-4.9/ixgbe-handle-close-suspend-race-with-netif_device_detach-present.patch
queue-4.9/extcon-remove-potential-problem-when-calling-extcon_register_notifier.patch
queue-4.9/scsi-lpfc-correct-host-name-in-symbolic_name-field.patch
queue-4.9/alsa-vx-don-t-try-to-update-capture-stream-before-running.patch
queue-4.9/staging-greybus-add-host-device-function-pointer-checks.patch
queue-4.9/gpu-drm-mgag200-mgag200_main-handle-error-from-pci_iomap.patch
queue-4.9/staging-rtl8188eu-fix-incorrect-error-tags-from-logs.patch
queue-4.9/uapi-fix-linux-rds.h-userspace-compilation-error.patch
queue-4.9/ata-sata_highbank-should-depend-on-has_dma.patch
queue-4.9/power-supply-axp288_fuel_gauge-read-15-bit-values-2-registers-at-a-time.patch
queue-4.9/mips-init-ensure-bootmem-does-not-corrupt-reserved-memory.patch
queue-4.9/extcon-palmas-check-the-parent-instance-to-prevent-the-null.patch
queue-4.9/scsi-lpfc-fcoe-vport-enable-disable-does-not-bring-up-the-vport.patch
queue-4.9/power-supply-axp288_fuel_gauge-read-12-bit-values-2-registers-at-a-time.patch
queue-4.9/revert-dt-bindings-add-vendor-prefix-for-lego.patch
queue-4.9/mips-netlogic-exclude-netlogic-xlp-pic-code-from-xlr-builds.patch
queue-4.9/drm-sti-sti_vtg-handle-return-null-error-from-devm_ioremap_nocache.patch
queue-4.9/ixgbe-reduce-i2c-retry-count-on-x550-devices.patch
queue-4.9/ixgbe-do-not-disable-fec-from-the-driver.patch
queue-4.9/x86-irq-trace-add-__irq_entry-annotation-to-x86-s-platform-irq-handlers.patch
queue-4.9/scsi-lpfc-correct-issue-leading-to-oops-during-link-reset.patch
queue-4.9/igb-fix-hw_dbg-logging-in-igb_update_flash_i210.patch
queue-4.9/arm-dts-fix-omap3-off-mode-pull-defines.patch
queue-4.9/arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch
queue-4.9/uapi-fix-linux-rds.h-userspace-compilation-errors.patch
queue-4.9/scsi-lpfc-add-missing-memory-barrier.patch
queue-4.9/alsa-vx-fix-possible-transfer-overflow.patch
queue-4.9/backlight-lcd-fix-race-condition-during-register.patch
queue-4.9/fm10k-request-reset-when-mbx-state-changes.patch
queue-4.9/arm64-dts-ns2-reserve-memory-for-nitro-firmware.patch
queue-4.9/staging-rtl8712-fixed-little-endian-problem.patch
queue-4.9/revert-crypto-xts-add-ecb-dependency.patch
queue-4.9/backlight-adp5520-fix-error-handling-in-adp5520_bl_probe.patch
queue-4.9/staging-wilc1000-fix-endian-sparse-warning.patch
queue-4.9/alsa-hda-realtek-add-new-codec-id-alc299.patch
queue-4.9/ixgbe-fix-aer-error-handling.patch
queue-4.9/scsi-ufs-add-capability-to-keep-auto-bkops-always-enabled.patch
queue-4.9/tcp-provide-timestamps-for-partial-writes.patch
queue-4.9/revert-uapi-fix-linux-rds.h-userspace-compilation-errors.patch
queue-4.9/ixgbe-configure-advertised-speeds-correctly-for-kr-kx-backplane.patch
queue-4.9/mips-traps-ensure-l1-l2-ecc-checking-match-for-cm3-systems.patch
queue-4.9/ixgbe-add-mask-for-64-rss-queues.patch
queue-4.9/revert-dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch
queue-4.9/rtc-rx8010-change-lock-mechanism.patch
queue-4.9/mips-end-asm-function-prologue-macros-with-.insn.patch
queue-4.9/ata-ata_bmdma-should-depend-on-has_dma.patch
queue-4.9/drm-omap-panel-sony-acx565akm.c-add-module_alias.patch
queue-4.9/ixgbe-fix-reporting-of-100mb-capability.patch
queue-4.9/igb-close-suspend-race-in-netif_device_detach.patch
queue-4.9/igb-reset-the-phy-before-reading-the-phy-id.patch
queue-4.9/mips-init-ensure-reserved-memory-regions-are-not-added-to-bootmem.patch
queue-4.9/arm-omap2-fix-init-for-multiple-quirks-for-the-same-soc.patch
queue-4.9/scsi-ufs-qcom-fix-module-autoload.patch
queue-4.9/arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch
reply other threads:[~2017-11-19 10:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=151108760041139@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.levin@verizon.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.