From: Jordan Crouse <jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [PATCH 5/8] drm/msm/adreno: Move clock parsing to adreno_gpu_init()
Date: Tue, 21 Nov 2017 12:40:55 -0700 [thread overview]
Message-ID: <1511293258-12415-6-git-send-email-jcrouse@codeaurora.org> (raw)
In-Reply-To: <1511293258-12415-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Move the clock parsing to adreno_gpu_init() to allow for target
specific probing and manipulation of the clock tables.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
drivers/gpu/drm/msm/adreno/adreno_device.c | 72 ----------------------------
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 77 ++++++++++++++++++++++++++++--
drivers/gpu/drm/msm/adreno/adreno_gpu.h | 1 -
3 files changed, 73 insertions(+), 77 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c
index 80d26b9..250fa1e 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_device.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_device.c
@@ -17,7 +17,6 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/pm_opp.h>
#include "adreno_gpu.h"
#define ANY_ID 0xff
@@ -196,70 +195,6 @@ static int find_chipid(struct device *dev, struct adreno_rev *rev)
return 0;
}
-/* Get legacy powerlevels from qcom,gpu-pwrlevels and populate the opp table */
-static int adreno_get_legacy_pwrlevels(struct device *dev)
-{
- struct device_node *child, *node;
- int ret;
-
- node = of_find_compatible_node(dev->of_node, NULL,
- "qcom,gpu-pwrlevels");
- if (!node) {
- dev_err(dev, "Could not find the GPU powerlevels\n");
- return -ENXIO;
- }
-
- for_each_child_of_node(node, child) {
- unsigned int val;
-
- ret = of_property_read_u32(child, "qcom,gpu-freq", &val);
- if (ret)
- continue;
-
- /*
- * Skip the intentionally bogus clock value found at the bottom
- * of most legacy frequency tables
- */
- if (val != 27000000)
- dev_pm_opp_add(dev, val, 0);
- }
-
- return 0;
-}
-
-static int adreno_get_pwrlevels(struct device *dev,
- struct adreno_platform_config *config)
-{
- unsigned long freq = ULONG_MAX;
- struct dev_pm_opp *opp;
- int ret;
-
- /* You down with OPP? */
- if (!of_find_property(dev->of_node, "operating-points-v2", NULL))
- ret = adreno_get_legacy_pwrlevels(dev);
- else
- ret = dev_pm_opp_of_add_table(dev);
-
- if (ret)
- return ret;
-
- /* Find the fastest defined rate */
- opp = dev_pm_opp_find_freq_floor(dev, &freq);
- if (!IS_ERR(opp)) {
- config->fast_rate = freq;
- dev_pm_opp_put(opp);
- }
-
- if (!config->fast_rate) {
- DRM_DEV_INFO(dev,
- "Could not find clock rate. Using default\n");
- /* Pick a suitably safe clock speed for any target */
- config->fast_rate = 200000000;
- }
-
- return 0;
-}
-
static int adreno_bind(struct device *dev, struct device *master, void *data)
{
static struct adreno_platform_config config = {};
@@ -272,13 +207,6 @@ static int adreno_bind(struct device *dev, struct device *master, void *data)
if (ret)
return ret;
- /* find clock rates: */
- config.fast_rate = 0;
-
- ret = adreno_get_pwrlevels(dev, &config);
- if (ret)
- return ret;
-
dev->platform_data = &config;
set_gpu_pdev(drm, to_platform_device(dev));
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 61e3091..b4bac84 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -17,6 +17,7 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/pm_opp.h>
#include "adreno_gpu.h"
#include "msm_gem.h"
#include "msm_mmu.h"
@@ -465,6 +466,76 @@ void adreno_wait_ring(struct msm_ringbuffer *ring, uint32_t ndwords)
ring->id);
}
+/* Get legacy powerlevels from qcom,gpu-pwrlevels and populate the opp table */
+static int adreno_get_legacy_pwrlevels(struct device *dev)
+{
+ struct device_node *child, *node;
+ int ret;
+
+ node = of_find_compatible_node(dev->of_node, NULL,
+ "qcom,gpu-pwrlevels");
+ if (!node) {
+ dev_err(dev, "Could not find the GPU powerlevels\n");
+ return -ENXIO;
+ }
+
+ for_each_child_of_node(node, child) {
+ unsigned int val;
+
+ ret = of_property_read_u32(child, "qcom,gpu-freq", &val);
+ if (ret)
+ continue;
+
+ /*
+ * Skip the intentionally bogus clock value found at the bottom
+ * of most legacy frequency tables
+ */
+ if (val != 27000000)
+ dev_pm_opp_add(dev, val, 0);
+ }
+
+ return 0;
+}
+
+static int adreno_get_pwrlevels(struct device *dev,
+ struct msm_gpu *gpu)
+{
+ unsigned long freq = ULONG_MAX;
+ struct dev_pm_opp *opp;
+ int ret;
+
+ gpu->fast_rate = 0;
+
+ /* You down with OPP? */
+ if (!of_find_property(dev->of_node, "operating-points-v2", NULL))
+ ret = adreno_get_legacy_pwrlevels(dev);
+ else {
+ ret = dev_pm_opp_of_add_table(dev);
+ if (ret)
+ dev_err(dev, "Unable to set the OPP table\n");
+ }
+
+ if (!ret) {
+ /* Find the fastest defined rate */
+ opp = dev_pm_opp_find_freq_floor(dev, &freq);
+ if (!IS_ERR(opp)) {
+ gpu->fast_rate = freq;
+ dev_pm_opp_put(opp);
+ }
+ }
+
+ if (!gpu->fast_rate) {
+ dev_warn(dev,
+ "Could not find a clock rate. Using a reasonable default\n");
+ /* Pick a suitably safe clock speed for any target */
+ gpu->fast_rate = 200000000;
+ }
+
+ DBG("fast_rate=%u, slow_rate=27000000", gpu->fast_rate);
+
+ return 0;
+}
+
int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
struct adreno_gpu *adreno_gpu,
const struct adreno_gpu_funcs *funcs, int nr_rings)
@@ -479,10 +550,6 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
adreno_gpu->revn = adreno_gpu->info->revn;
adreno_gpu->rev = config->rev;
- gpu->fast_rate = config->fast_rate;
-
- DBG("fast_rate=%u, slow_rate=27000000", gpu->fast_rate);
-
adreno_gpu_config.ioname = "kgsl_3d0_reg_memory";
adreno_gpu_config.irqname = "kgsl_3d0_irq";
@@ -491,6 +558,8 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
adreno_gpu_config.nr_rings = nr_rings;
+ adreno_get_pwrlevels(&pdev->dev, gpu);
+
pm_runtime_set_autosuspend_delay(&pdev->dev, DRM_MSM_INACTIVE_PERIOD);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_enable(&pdev->dev);
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.h b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
index 88d1bdf..8d3d0a9 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
@@ -129,7 +129,6 @@ struct adreno_gpu {
/* platform config data (ie. from DT, or pdata) */
struct adreno_platform_config {
struct adreno_rev rev;
- uint32_t fast_rate;
};
#define ADRENO_IDLE_TIMEOUT msecs_to_jiffies(1000)
--
1.9.1
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
next prev parent reply other threads:[~2017-11-21 19:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-21 19:40 [PATCH 0/8] msm/gpu: devfreq support Jordan Crouse
2017-11-21 19:40 ` [PATCH 1/8] drm/msm/adreno: Call dev_pm_opp_put() Jordan Crouse
2017-11-21 19:40 ` [PATCH 2/8] drm/msm/adreno: Remove a useless call to dev_pm_opp_get_freq() Jordan Crouse
[not found] ` <1511293258-12415-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-11-21 19:40 ` [PATCH 3/8] drm/msm/gpu: Remove unused bus scaling code Jordan Crouse
2017-11-21 19:40 ` Jordan Crouse [this message]
2017-11-21 19:40 ` [PATCH 7/8] drm/msm/adreno: a5xx: Explicitly program the CP0 performance counter Jordan Crouse
2017-11-21 19:40 ` [PATCH 4/8] drm/msm/adreno: Cleanup chipid parsing Jordan Crouse
2017-11-21 19:40 ` [PATCH 6/8] drm/msm/adreno: Read the speed bins for a5xx targets Jordan Crouse
2017-11-21 19:40 ` [PATCH 8/8] drm/msm/gpu: Add devfreq support for the GPU Jordan Crouse
2017-11-23 21:24 ` kbuild test robot
2017-11-24 3:14 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511293258-12415-6-git-send-email-jcrouse@codeaurora.org \
--to=jcrouse-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.