From: <gregkh@linuxfoundation.org>
To: masashi.honma@gmail.com, alexander.levin@verizon.com,
gregkh@linuxfoundation.org, johannes.berg@intel.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "mac80211: Remove invalid flag operations in mesh TSF synchronization" has been added to the 3.18-stable tree
Date: Tue, 28 Nov 2017 10:58:59 +0100 [thread overview]
Message-ID: <15118631396203@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
mac80211: Remove invalid flag operations in mesh TSF synchronization
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mac80211-remove-invalid-flag-operations-in-mesh-tsf-synchronization.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Tue Nov 28 10:58:31 CET 2017
From: Masashi Honma <masashi.honma@gmail.com>
Date: Thu, 8 Dec 2016 10:15:50 +0900
Subject: mac80211: Remove invalid flag operations in mesh TSF synchronization
From: Masashi Honma <masashi.honma@gmail.com>
[ Upstream commit 76f43b4c0a9337af22827d78de4f2b8fd5328489 ]
mesh_sync_offset_adjust_tbtt() implements Extensible synchronization
framework ([1] 13.13.2 Extensible synchronization framework). It shall
not operate the flag "TBTT Adjusting subfield" ([1] 8.4.2.100.8 Mesh
Capability), since it is used only for MBCA ([1] 13.13.4 Mesh beacon
collision avoidance, see 13.13.4.4.3 TBTT scanning and adjustment
procedures for detail). So this patch remove the flag operations.
[1] IEEE Std 802.11 2012
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
[remove adjusting_tbtt entirely, since it's now unused]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/ieee80211_i.h | 1 -
net/mac80211/mesh.c | 3 ---
net/mac80211/mesh_sync.c | 11 -----------
3 files changed, 15 deletions(-)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -640,7 +640,6 @@ struct ieee80211_if_mesh {
const struct ieee80211_mesh_sync_ops *sync_ops;
s64 sync_offset_clockdrift_max;
spinlock_t sync_offset_lock;
- bool adjusting_tbtt;
/* mesh power save */
enum nl80211_mesh_power_mode nonpeer_pm;
int ps_peers_light_sleep;
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -289,8 +289,6 @@ int mesh_add_meshconf_ie(struct ieee8021
/* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */
*pos |= ifmsh->ps_peers_deep_sleep ?
IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00;
- *pos++ |= ifmsh->adjusting_tbtt ?
- IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00;
*pos++ = 0x00;
return 0;
@@ -790,7 +788,6 @@ int ieee80211_start_mesh(struct ieee8021
ifmsh->mesh_cc_id = 0; /* Disabled */
/* register sync ops from extensible synchronization framework */
ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id);
- ifmsh->adjusting_tbtt = false;
ifmsh->sync_offset_clockdrift_max = 0;
set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
ieee80211_mesh_root_setup(ifmsh);
--- a/net/mac80211/mesh_sync.c
+++ b/net/mac80211/mesh_sync.c
@@ -119,7 +119,6 @@ static void mesh_sync_offset_rx_bcn_pres
*/
if (elems->mesh_config && mesh_peer_tbtt_adjusting(elems)) {
- clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
msync_dbg(sdata, "STA %pM : is adjusting TBTT\n",
sta->sta.addr);
goto no_sync;
@@ -168,11 +167,9 @@ static void mesh_sync_offset_adjust_tbtt
struct beacon_data *beacon)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
- u8 cap;
WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
WARN_ON(!rcu_read_lock_held());
- cap = beacon->meshconf->meshconf_cap;
spin_lock_bh(&ifmsh->sync_offset_lock);
@@ -186,21 +183,13 @@ static void mesh_sync_offset_adjust_tbtt
"TBTT : kicking off TBTT adjustment with clockdrift_max=%lld\n",
ifmsh->sync_offset_clockdrift_max);
set_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags);
-
- ifmsh->adjusting_tbtt = true;
} else {
msync_dbg(sdata,
"TBTT : max clockdrift=%lld; too small to adjust\n",
(long long)ifmsh->sync_offset_clockdrift_max);
ifmsh->sync_offset_clockdrift_max = 0;
-
- ifmsh->adjusting_tbtt = false;
}
spin_unlock_bh(&ifmsh->sync_offset_lock);
-
- beacon->meshconf->meshconf_cap = ifmsh->adjusting_tbtt ?
- IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING | cap :
- ~IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING & cap;
}
static const struct sync_method sync_methods[] = {
Patches currently in stable-queue which might be from masashi.honma@gmail.com are
queue-3.18/mac80211-suppress-new_peer_candidate-event-if-no-room.patch
queue-3.18/mac80211-remove-invalid-flag-operations-in-mesh-tsf-synchronization.patch
reply other threads:[~2017-11-28 9:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15118631396203@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.levin@verizon.com \
--cc=johannes.berg@intel.com \
--cc=masashi.honma@gmail.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.